|
From: | Gregory, Adam |
Subject: | [Discuss-gnuradio] UHD IP Address Setting Issue |
Date: | Tue, 16 Nov 2010 16:57:45 -0000 |
Hi all, I’m trying to get a MIMO setup working using USRP2s with the UHD drivers. I have a PC with 2 gigabit Ethernet interfaces, and a USRP2 connected to each. My problem is that I can’t change the USRP2 IP address so that the two devices have different addresses. I can set the IP address in the motherboard EEPROM using usrp_burn_mb_eeprom, and I can see the updated IP address reported when I run uhd_usrp_probe, but the IP address the USRP2 answers to is still 192.168.10.2. Power-cycling the device has no effect, nor does trying another PC in case of any address caching. I’ve tried with UHD firmware & fpga images built myself from the latest git, and also with the 01/09/2010 release. I’ve seen on the mailing list archives that some people have had success with MIMO and UHD, and I haven’t found any reference to IP address problems. I must be missing something. Could anyone help please? Thanks in advance, Adam Roke Manor Research Ltd, Romsey, Part of the Chemring Group Registered in England & Wales at: ------------------------------------------------------------------------ Visit our website at www.roke.co.uk ------------------------------------------------------------------------ The information contained in this e-mail and any attachments is ------------------------------------------------------------------------ Please consider the environment before printing this email |
[Prev in Thread] | Current Thread | [Next in Thread] |