Re: [Discuss-gnuradio] UHD IP Address Setting Issue

[Veljko Pejovic]

Hi,

usrp2_card_burner_gui.py in share/uhd/utils worked fine for me on
Ubuntu 10.04. Did you set the network interfaces addresses properly?

Cheers,

Veljko


On Tue, Nov 16, 2010 at 8:57 AM, Gregory, Adam <address@hidden> wrote:
> Hi all,
>
>
>
> I’m trying to get a MIMO setup working using USRP2s with the UHD drivers. I
> have a PC with 2 gigabit Ethernet interfaces, and a USRP2 connected to each.
>
>
>
> My problem is that I can’t change the USRP2 IP address so that the two
> devices have different addresses. I can set the IP address in the
> motherboard EEPROM using usrp_burn_mb_eeprom, and I can see the updated IP
> address reported when I run uhd_usrp_probe, but the IP address the USRP2
> answers to is still 192.168.10.2.
>
>
>
> Power-cycling the device has no effect, nor does trying another PC in case
> of any address caching. I’ve tried with UHD firmware & fpga images built
> myself from the latest git, and also with the 01/09/2010 release.
>
>
>
> I’ve seen on the mailing list archives that some people have had success
> with MIMO and UHD, and I haven’t found any reference to IP address problems.
> I must be missing something. Could anyone help please?
>
>
>
> Thanks in advance,
>
> Adam
>
> --
>
> Roke Manor Research Ltd, Romsey,
> Hampshire, SO51 0ZN, United Kingdom
>
> Part of the Chemring Group
>
> Registered in England & Wales at:
> Chemring Group PLC, Chemring House, 1500 Parkway,
> Whiteley, Fareham, Hampshire PO15 7AF, ENGLAND.
> Registered No: 267550
>
> ------------------------------------------------------------------------
>
> Visit our website at www.roke.co.uk
>
> ------------------------------------------------------------------------
>
> The information contained in this e-mail and any attachments is
> proprietary to Roke Manor Research Ltd and must not be passed to any
> third party without permission. This communication is for information
> only and shall not create or change any contractual relationship.
>
> ------------------------------------------------------------------------
>
> Please consider the environment before printing this email
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>