[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] reg calculation of BER/SNR using gnuradio UHD
From: |
Marcus D. Leech |
Subject: |
Re: [Discuss-gnuradio] reg calculation of BER/SNR using gnuradio UHD |
Date: |
Tue, 27 Sep 2011 18:30:00 -0400 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.22) Gecko/20110906 Fedora/3.1.14-1.fc14 Thunderbird/3.1.14 |
On 09/27/2011 06:12 PM, shantharam balasubramanian wrote:
Hi
When I run it in USRP1 nodes, I don't get the error as before, that
says it cannot find USRP1.
USRP1s didn't require any "wire format" or firmware/FPGA changes to
support UHD, so both "classic" and "UHD" programs will work,
with USRP1s provided that the daughtercard in use is "pre-UHD".
Development of the "classic" branch was frozen quite some time ago, so
any cards that are "new" won't work in anything but the UHD environment.
But the benchmark_tx program says "Failed to tune to center
frequency". I then tried to send it in 2 MHZ and also in 2 GHZ
frequency, but it still doesn't work.
What daughtercard are you using?
What rev of Gnu Radio are you using? I strongly suggest always trying
to run with some quite current.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org