discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Announce OOT module for IEEE-802.15.4g MR-FSK


From: Wayne Roberts
Subject: Re: [Discuss-gnuradio] Announce OOT module for IEEE-802.15.4g MR-FSK
Date: Wed, 13 Nov 2013 10:58:02 -0800

The GRC flow graphs are in the examples subdirectory.
There is a local_loopback example, which tests all the blocks without any hardware.
And there is one for testing UHD sink as transmitter, and another for UHD source as packet receiver.
I use USRP-B100 talking to CC1200 radio chip, and the mrfsk_TX.grc generates identical packets.

qa_mrfsk_pkt_sink.py currently doesnt do anything because the individual framer sinks are tested by themselves.
qa_mrfsk_pkt_sink.py would only need to test the code in mrfsk_pkt_sink.py, which is only connecting the correlate_access_code to the framer sinks.

I will later study pyBombs.

btw, this protocol is used at www.wi-sun.org

On Wed, Nov 13, 2013 at 6:26 AM, Martin Braun (CEL) <address@hidden> wrote:
On Mon, Nov 11, 2013 at 03:17:14PM -0800, Wayne Roberts wrote:
> I have reached release functionality of out-of-tree module I use to help in PHY
> conformance/interoperability to the MR-FSK standard in IEEE-802.15.4g.
>
> [...]
>
> For more info, see the wiki for it
> https://github.com/dudmuck/gr-ieee802154g

Hi Wayne,

and thanks a lot for publishing this!
Perhaps you can submit a recipe for PyBombs?

I had a very quick look at it (I don't really have anything to test it
with). One of the QA codes (qa_mrfsk_pkt_sink) doesn't work properly, it
uses the installed version to test.

Some more suggestions:
- Can you add a full UHD-to-bits GRC flow graph in apps/ ? That would
  help people see how it all works together.
- Perhaps you can add an IQ capture to test the code without having a
  transmitter nearby? I'm not sure of the overall bandwidth occupied,
  but if it's not too big, that might be useful.

Cheers,
Martin

--
Karlsruhe Institute of Technology (KIT)
Communications Engineering Lab (CEL)

Dipl.-Ing. Martin Braun
Research Associate

Kaiserstraße 12
Building 05.01
76131 Karlsruhe

Phone: +49 721 608-43790
Fax: +49 721 608-46071
www.cel.kit.edu

KIT -- University of the State of Baden-Württemberg and
National Laboratory of the Helmholtz Association

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio



reply via email to

[Prev in Thread] Current Thread [Next in Thread]