Re: Issue with USRP N210

[whoppix_tn whoppix]

Thank you Marcus and Chris,

I figure out that indeed that the ports were not properly labeled. I've moved the antenna to the second RF and it gave a result:

However, I still see that the power is not that high (around -75dB). Is that normal?

Regards,

Akram

On Sun, Mar 29, 2020 at 4:38 PM Marcus D Leech <address@hidden> wrote:

Also what daughtercard are are you using?


Sent from my iPhone

> On Mar 29, 2020, at 8:10 AM, whoppix_tn whoppix <address@hidden> wrote:
>
> 
> Dear,
>
> I'm starting with USRP N210/Gnuradio, so my first exercise was to test it using uhd_fft. Here is the result I'm getting:
>
> uhd_fft --args "addr=192.168.10.2" -A RX2 -s 10e6 -g 10 -f 102e6
>
> <image.png>
>
>
> It seems to be that the result is not really as expected. In this FM band, I should see plenty of spikes which is not the case. Also, for the one that exists (100Mhz), the power is at -70dB which also seems too little to me. FYI, I'm using the clocktamer 1.2. I appreciate your support to make sure I have everything properly setup.
>
> Regards,
> Akram
>