|
From: | Marcus D. Leech |
Subject: | Re: AW: RFNoC, UHD4.0 |
Date: | Wed, 11 May 2022 15:33:17 -0400 |
User-agent: | Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101 Thunderbird/91.8.1 |
I use a n310 and have two 10gigbit for data streaming and one 1gigbit for managing the device… the strange thing about it is that the example flowgraph with rx radio downconverter and rx streamer works without any problems…You might try upgrading to newer release of UHD. I would also suggest continuing this discussion on the usrp-users mailing list, where there's a bit more RFNOC
I run the application on the host pc…
What is that receiver profile error about?
What can I do about the sha256 error? I also think the problem is rather due to my setup …
Thank you,
BR
Von: Discuss-gnuradio <discuss-gnuradio-bounces+anton.dobler=unibw.de@gnu.org> im Auftrag von Marcus D. Leech <patchvonbraun@gmail.com>
Gesendet: Mittwoch, 11. Mai 2022 20:54:15
An: discuss-gnuradio@gnu.org; usrp-users@lists.ettus.com
Betreff: Re: RFNoC, UHD4.0On 2022-05-11 14:45, Dobler, Anton wrote:
What type of USRP? Are you running this on the device itself, or over a network connection? If over a network connection, what type of connection?Dear Community,
I try to set up a basic flowgraph in GRC consisting out of a null source, a tx streamer and DUC and a TX radio.
I use UHD4.0 and GR3.8.2.
However, I get the following error message:
RuntimeError: RuntimeError: Error during RPC call to `init'. Error message: RuntimeError: Receiver profile out of range RF bandwidth.
I tried different settings for sample rate, etc. but still I get that error. I attached the used flowgraph.
The second question is with regards to the default fpga images. When I download the images I get the following error:
[ERROR] Downloaded SHA256 does not match manifest for https://files.ettus.com/binaries/cache/e3xx/uhd-2cba65b/e3xx_e310_sg1_fpga_default-g2cba65b.zip!01137 kB / 01137 kB (100%) e3xx_e310_sg3_fpga_default-g2cba65b.zip[ERROR] Downloaded SHA256 does not match manifest for https://files.ettus.com/binaries/cache/e3xx/uhd-2cba65b/e3xx_e310_sg3_fpga_default-g2cba65b.zip!10183 kB / 10183 kB (100%) e3xx_e320_fpga_default-g2cba65b.zip[ERROR] Downloaded SHA256 does not match manifest for https://files.ettus.com/binaries/cache/e3xx/uhd-2cba65b/e3xx_e320_fpga_default-g2cba65b.zip!20729 kB / 20729 kB (100%) n3xx_n310_fpga_default-g2cba65b.zip[ERROR] Downloaded SHA256 does not match manifest for https://files.ettus.com/binaries/cache/n3xx/uhd-2cba65b/n3xx_n310_fpga_default-g2cba65b.zip!14345 kB / 14345 kB (100%) n3xx_n300_fpga_default-g2cba65b.zip[ERROR] Downloaded SHA256 does not match manifest for https://files.ettus.com/binaries/cache/n3xx/uhd-2cba65b/n3xx_n300_fpga_default-g2cba65b.zip!27285 kB / 27285 kB (100%) n3xx_n320_fpga_default-g2cba65b.zip[ERROR] Downloaded SHA256 does not match manifest for https://files.ettus.com/binaries/cache/n3xx/uhd-2cba65b/n3xx_n320_fpga_default-g2cba65b.zip!
What can I do to solve that problem?
Any help would be more than welcome!
Thanks,
BR,
Anton
The SHA256 errors means that there's a problem with the repository, or that your access to the repository is corrupting files, or they're being corrupted on
your system as they arrive. I haven't *heard* that the repository has any problems for that release of UHD.
[Prev in Thread] | Current Thread | [Next in Thread] |