problems with fonts

[Matej Kosik]

I am not very happy sending another odd question, but it seems to me
something went wrong with my GNUstep:

I have had some troubles with fonts [I did not have any in the
        `/usr/X11R6/share/ghostscript/fonts'
directory, so I have unpacked `ghostscript-fonts-5.10a.tar.gz' there and
were happy that my `PanelTest.app' runs correctly.

But when I turned on my machine anothertimes, my X did not start but
ended with this message:

--------------------------------------------------------------------------------XFree86
Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
        If the server is older than 6-12 months, or if your card is
newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.5-22smp i686 [ELF]
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      s3_savage, NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
      RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED,
      GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
      RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED,
      GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000,
ET6100,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31,
wd90c33,
      gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215,
      sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300,
sis630,
      sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
      tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr,
tgui9400cxi,
      tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320,
tgui9660,
      tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
      cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985,
cyber9397dvd,
      blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426,
clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22,
ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101,
ali2228,
      ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420,
cl6440,
      video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
      s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093,
NM2097,
      NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540,
ct65545,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
      ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110,
i740,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
      ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110,
i740,
      i740_pci, Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, smi,
      generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 5
(**) Mouse: zaxismapping: (-)4 (+)5
(**) SVGA: Graphics device ID: "S3 Inc.|86c325 [ViRGE]"
(**) SVGA: Monitor ID: "Acer 54e"
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "unix/:7100"
(--) SVGA: PCI: S3 ViRGE rev 6, Memory @ 0xe0000000
(--) SVGA: S3V: ViRGE rev 6, Linear FB @ 0xe0000000
(--) SVGA: PCI: S3 ViRGE rev 6, Memory @ 0xe0000000
(--) SVGA: S3V: ViRGE rev 6, Linear FB @ 0xe0000000
(--) SVGA: Detected S3 ViRGE
(--) SVGA: using driver for chipset "s3_virge"
(--) SVGA: videoram:  2048k
(--) SVGA: Ramdac speed: 135 MHz  (95 MHz for 16 bpp)
(--) SVGA: Detected current MCLK value of 50.114 MHz
(--) SVGA: chipset:  s3_virge
(--) SVGA: videoram: 2048k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 95.000 MHz
(**) SVGA: Mode "800x600": mode clock =  50.000
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: s3_virge: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: Maximum allowed dot-clock: 95.000 MHz
(**) SVGA: Mode "800x600": mode clock =  50.000
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: s3_virge: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: s3_virge: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE
imagetext, TE/NonTE polytext)
(--) SVGA: XAA: Using 6 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and non-transparent stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
_FontTransSocketUNIXConnect: Can't connect: errno = 111
failed to set default font path 'unix/:7100'
Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

X connection to :0.0 broken (explicit kill or server shutdown).

--------------------------------------------------------------------------------
before that [I have installed the font as required] I was playing with

before that [I have installed the font as required] I was playing with
`wsetfont' and `wmaker.inst' and caused some disturbed some config files

!!! _FontTransSocketUNIXConnect ... suspicious

please help, thank you

Matej Kosik