Re: [Dvdrtools-users] dvdrtools isnt finding Pioneer 105

[address@hidden]

because of the zip drive i have in my pc the drive was /dev/sg4 - i had to 
create it, now everythings fine, thanx for the help anyway :)

On Fri, 13 Jun 2003 09:19:34 -0800
Greg Madden <address@hidden> wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> On Thursday 12 June 2003 11:07 pm, address@hidden wrote:
> > The scsi emulation seems to work, and the modules you are describing are
> > compiled into my kernel, the drive is shown in /proc/scsi/scsi as well
> > and is defined as device 1,1,0 there but not shown in cdrecord/dvdrecord
> > -scanbus - any other ideas ?
> >
> >
> > On Fri, 13 Jun 2003 08:44:58 +0200
> >
> > Warly <address@hidden> wrote:
> > > "address@hidden" <address@hidden> writes:
> > > > sorry, for the A05 in the topic i read before a message about the
> > > > A05, so the typo...
> > > >
> > > > what do you mean with sg and sd_mod modules ?
> > >
> > > If your burner is a ide burner used with ide-scsi emulation, you must
> > > type as root modprobe sg and modprobe sd_mod to be able to see it with
> > > cdrecord -scanbus.
> > >
> > > --
> > > Warly
> 
> The info you get from /proc/* comes from the initial scan of the PCI bus  
> the proms found on the cards. This doesn't necessarily mean the cards are 
> setup properly with the OS. There is a way to specify the scsi bus's in 
> modules.conf or similar, sorry for not having the correct info but it may 
> be a starting point for a search. 
> 
> Another possibility, I use VMware and when the guest OS has control of a 
> scsi device 'cdrecord -scanbus' fails. 
> - -- 
> Greg Madden
> Debian GNU/Linux
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.2 (GNU/Linux)
> 
> iD8DBQE+6gexk7rtxKWZzGsRAtuqAJ45RcPKCuPVsJoX0PDVaBUzdecUoQCfTNgj
> hCRev2JUEu49OuCujYWduiM=
> =3bka
> -----END PGP SIGNATURE-----
> 
> 
> 
> _______________________________________________
> Dvdrtools-users mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
>