[Dvdrtools-users] dvdrtools on Solaris 2.6?

[Duplantier, Guy (Mission Systems)]

Has anyone else used dvdrtools on Solaris 2.6?
 
I downloaded the src, dvdrtools-0.1.6, and compiled it.  However, I get an 
error when trying to burn a DVD.  I'm using a Pioneer DVR-107, 8X on a Sparc 
Ultra 10 workstation.  The drive is recognized. The command I use to burn is: 
"dvdrecord -v -dummy -delay 0 -dao speed=8 dev=0,2,0 foo.iso".  I've also tried 
setting different speeds to no avail.  Please help!
 
Thanks,
 
Here's the error:
 
dvdrtools v0.1.4
Portions (c) 2002-2003 Ark Linux <address@hidden <mailto:address@hidden> >
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
 
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License along with
this program; see the file COPYING.  If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (sparc-sun-solaris2.6) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,2,0'
scsibus: 0 target: 2 lun: 0
Warning: Using USCSI interface.
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a 
'@(#)scsitransp.c <mailto:'@(#)scsitransp.c>      1.81 01/04/20 Copyright 
1988,1995,2000 J. Schilling').
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-107D'
Revision       : '1.10'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  160 MB         padsize:  30 KB
Total size:     183 MB (18:12.89) = 81967 sectors
Lout start:     184 MB (18:14/67) = 81967 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2216529
Starting to write CD/DVD at speed 4 in dummy mode for single session.
Last chance to quit, starting dummy write in 9 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Sending CUE sheet...
dvdrecord: WARNING: Drive returns wrong startsec (0) using -150
Starting new track at sector: 0
Track 01:   1 of 160 MB written (fifo  98%).dvdrecord: I/O error. write_g1: 
scsi sendcmd: no error
CDB:  2A 00 00 00 03 07 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No matching 
qualifier] Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.000s timeout 200s
 
write track data: error after 1587200 bytes
Sense Bytes: 70 00 00 00 00 00 00 0E 00 00 00 00 00 00 00 00 00 00
Writing  time:   31.086s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.012s
dvdrecord: fifo had 89 puts and 26 gets.
dvdrecord: fifo was 0 times empty and 14 times full, min fill was 96%.