Problem connecting 6100

[Fernando Álvarez-Uría]

Hi all!

Ive recently purchased a Nokia 6100 and a usb cable (MA-8620E), which 
uses pl2303 kernel module.

This is an output of /var/log/messages, just after plugging the adapter:

Jun 30 11:02:03 tm242 kernel: hub.c: new USB device 00:1d.2-1, assigned 
address 4
Jun 30 11:02:03 tm242 kernel: usbserial.c: PL-2303 converter detected
Jun 30 11:02:03 tm242 kernel: usbserial.c: PL-2303 converter now 
attached to ttyUSB0 (or usb/tts/0 for devfs)
Jun 30 11:02:06 tm242 usb.agent[29878]: missing kernel or user mode 
driver pl2303
Jun 30 11:02:08 tm242 devlabel: devlabel service started/restarted

And when i try to connect the phone, y get:

GNOKII Version 0.6.1
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
LOG: xdebug mask is 0x1
Lockfile /var/lock/LCK..ttyUSB0 is stale. Overriding it..
phone instance config:
model: 6100
port_device: /dev/ttyUSB0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 1
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
...
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial write: transmitter busy, waiting
Serial write: transmitter ready
...
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Serial device: setting speed to 115200
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
...
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial write: transmitter busy, waiting
Serial write: transmitter ready
...
IMEI         : (unknown)
Manufacturer : Nokia
Model        : (unknown)
Revision     : (unknown)
Serial device: closing device

My config file is:

[global]
port = /dev/ttyUSB0

model = 6100
initlength = default
connection = serial
bindir = /usr/sbin/
use_locking = yes
serial_baudrate = 19200
smsc_timeout = 10
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
[logging]
debug = on
rlpdebug = on
xdebug = on

I have tried using handshake hard/soft, connection dau9p and dlr3p, and 
also model AT, and does not work.

I thinks this has something to do with that line "Jun 30 11:02:06 tm242 
usb.agent[29878]: missing kernel or user mode driver pl2303" in 
/var/log/messages.

Im using 2.4.22-1.2188.nptl (fc1).

Any idea on this?


Thanks all.

--
Fernando Alvarez-Uria
Madrid, Spain
address@hidden
"Make it idiot proof, and someone will make a better idiot."