gnokii stopped working with new server hardware

[Robert Sander]

Hi!

We experience a strange problem. Gnokii stopped working when we
exchanged the hardware of the computer it should be running on.

The old one was a single Celeron box, the new one is a dual Xeon system.

The hardware does work. The phone + cable work on a different (also SMP)
system and both the serial ports on the new system work.

The debug output looks like:

GNOKII Version 0.6.5
LOG: debug mask is 0x1
Lockfile /var/lock/LCK..ttyS1 is stale. Overriding it..
phone instance config:
model: 6110
port_device: /dev/ttyS1
connection_type: 1
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Serial device: opening device /dev/ttyS1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
SM_Block: exiting the retry loop
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
SM_Block: exiting the retry loop
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
SM_Block: exiting the retry loop
Telephone interface init failed: Command timed out.
Quitting.

I appriciate any hints for a solution.

Greetings
-- 
Robert Sander                     Senior Manager Information Systems
Epigenomics AG    Kleine Praesidentenstr. 1    10178 Berlin, Germany
phone:+49-30-24345-330                          fax:+49-30-24345-555
http://www.epigenomics.com             address@hidden

Anotaram a data da Maratona.