Hi, with my nokia 3310 i can't get working the option "--monitor", gnokii go in an infinite loop. I wrong some thing or is "normal" for this model ? answer call work, --identify work.
With a 5110 --monitor work good.
Thankyou Atla.
--identify
Manufacturer : Nokia Found model "NHM-5" Model : 3310 Product name : NHM-5 Revision : SW 05.79, HW 1023
--monitor
GNOKII Version 0.6.28cvs
Couldn't read /home/sms/.gnokiirc config file. Couldn't read /home/sms/.gnokiirc config file. LOG: debug mask is 0x1 Config read from file /etc/gnokiirc. phone instance config: model = 6110 port = /dev/ttyS1
connection = serial initlength = default serial_baudrate = 19200 serial_write_usleep = -1 handshake = software require_dcd = 0 smsc_timeout = 10 rfcomm_channel = 0 sm_retry = 0 Serial device: opening device /dev/ttyS1
Serial device: setting speed to 115200 Serial device: setting RTS to low and DTR to high Message sent: 0x40 / 0x0004 00 01 64 01 | d [Received Ack of type 40, seq: 0]
[Sending Ack of type 40, seq: 4] Message received: 0x40 / 0x000c 01 01 64 03 01 4f 0d 01 01 01 1b 58 | d O X Received message type 40 Message: Extended commands enabled. Message sent: 0x40 / 0x0003
00 01 66 | f [Received Ack of type 40, seq: 1] [Sending Ack of type 40, seq: 5] Message received: 0x40 / 0x0014 01 01 66 01 33 35 31 34 37 35 38 30 33 31 31 34 | f 351475803114
37 33 34 00 | 734 Received message type 40 IMEI: 351475803114734 Message sent: 0x40 / 0x0004 00 01 64 01 | d [Received Ack of type 40, seq: 2]
[Sending Ack of type 40, seq: 6] Message received: 0x40 / 0x000c 01 01 64 03 01 4f 0d 01 01 01 1b 58 | d O X Received message type 40 Message: Extended commands enabled. Message sent: 0x40 / 0x0004
00 01 c8 01 | [Received Ack of type 40, seq: 3] [Sending Ack of type 40, seq: 7] Message received: 0x40 / 0x0025 01 01 c8 01 00 56 20 30 35 2e 37 39 0a 31 31 2d | V 05.79 11-
31 31 2d 30 32 0a 4e 48 4d 2d 35 0a 28 63 29 20 | 11-02 NHM-5 (c) 4e 4d 50 2e 00 | NMP. Received message type 40 Received SW 05.79 Received model NHM-5 Message sent: 0x40 / 0x0004
00 01 64 01 | d [Received Ack of type 40, seq: 4] [Sending Ack of type 40, seq: 0] Message received: 0x40 / 0x000c 01 01 64 03 01 4f 0d 01 01 01 1b 58 | d O X
Received message type 40 Message: Extended commands enabled. Message sent: 0x40 / 0x0004 00 01 c8 05 | [Received Ack of type 40, seq: 5] [Sending Ack of type 40, seq: 1]
Message received: 0x40 / 0x000a 01 01 c8 05 00 31 30 32 33 00 | 1023 Received message type 40 Received SW 05.79, HW 1023 Found model "NHM-5" Entering monitor mode... Message sent: 0x02 / 0x000a
00 01 00 20 01 01 00 00 01 01 | [Received Ack of type 02, seq: 6] Message sent: 0x02 / 0x000a 00 01 00 20 01 01 00 00 01 01 | SM_Block: exiting the retry loop Message sent: 0x02 / 0x000a
00 01 00 20 01 01 00 00 01 01 | SM_Block: exiting the retry loop Message sent: 0x0a / 0x0004 00 01 00 70 | p SM_Block: exiting the retry loop Message sent: 0x0a / 0x0004
00 01 00 70 | p SM_Block: exiting the retry loop Message sent: 0x0a / 0x0004 00 01 00 70 | p SM_Block: exiting the retry loop Getting rf level...
Getting battery level... Getting power source... Getting memory status... Message sent: 0x03 / 0x0005 00 01 00 07 03 | SM_Block: exiting the retry loop Message sent: 0x03 / 0x0005
00 01 00 07 03 | SM_Block: exiting the retry loop Message sent: 0x03 / 0x0005 00 01 00 07 03 | SM_Block: exiting the retry loop Getting memory status...
Message sent: 0x03 / 0x0005 00 01 00 07 02 | SM_Block: exiting the retry loop Message sent: 0x03 / 0x0005 00 01 00 07 02