gpsd-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re:


From: shouldbe q931
Subject: Re:
Date: Wed, 14 Apr 2021 20:19:48 +0100

Alas Brexit and cross border shipping.

I have not used, but https://www.gnss.store/ is in Latvia, which is the EU

Cheers


On Wed, Apr 14, 2021 at 7:12 PM Gary E. Miller <gem@rellim.com> wrote:
>
> Yo Massimiliano!
>
> On Wed, 14 Apr 2021 19:12:50 +0200
> Massimiliano Fago <massimiliano.fago@gmail.com> wrote:
>
> > > So you want a bar chip?  Or bare chip on a carrier PCB?
> >
> > I want bare chip on MY PCB
>
> Or more likely a bare module.  I should have said module The bare chips
> are rare and need added LNA, OSC, etc.
>
> > My PCB is a RasPi HAT
>
> Many hackers find it easier to buy a module on a carrier board and
> remove the module for their use.  The Uputronics module is hardly bigger
> than the chip, and a lot of the fiddly stuff, like antenna connections,
> are already done well.
>
> Any reason not to use the Upu part?
>
> https://store.uputronics.com/index.php?route=product/product&path=64&product_id=84
>
> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
>         gem@rellim.com  Tel:+1 541 382 8588
>
>             Veritas liberabit vos. -- Quid est veritas?
>     "If you can't measure it, you can't improve it." - Lord Kelvin



reply via email to

[Prev in Thread] Current Thread [Next in Thread]