Re: cmake ca-certificates

[Roy Lemmon]

Yes, I forgot the logfile(s). Here they are:

**************************************************************************************************************
rlemmon@parton ~/heppy$ ./external/fastjet/build.sh
[ building fastjet /home/rlemmon/heppy/external/fastjet ] 
-----------------[ configuration ]----------------- 
-- Will use /home/rlemmon/.guix-profile/bin/make when needed.
-- CMAKE_CURRENT_SOURCE_DIR: /home/rlemmon/heppy/external/fastjet
-- Note: this build requires to run within virtual environment of Python...
-- This is heppy_external_fastjet ver. 1.0
-- Will use /home/rlemmon/.guix-profile/bin/make when needed.
-- CMAKE_CURRENT_LIST_DIR: /home/rlemmon/heppy/external/fastjet
-- Python ver. 3.8.2 found.
-- FASTJET_VERSION 3.3.3
-- FASTJET_HEPPY_PREFIX /home/rlemmon/heppy/external/fastjet/fastjet-3.3.3
-- Python version string is 3.8.2
-- Python version parsed: 3.8.2
-- python3.8-config at /home/rlemmon/.guix-profile/bin/python3.8-config
-- Extra python directives for FASTJET compilation 
PYTHON=/home/rlemmon/.guix-profile/bin/python3.8 
PYTHON_CONFIG=/home/rlemmon/.guix-profile/bin/python3.8-config
-- note: CGAL not enabled - use -DENABLE_CGAL=TRUE to enable...
-- Configuring done
-- Generating done
-- Build files have been written to: 
/home/rlemmon/heppy/external/fastjet/build_fastjet
---------------------[ build ]--------------------- 
[ 12%] Performing download step (download, verify and extract) for 'FASTJET'
CMake Error at FASTJET-stamp/FASTJET-download-Release.cmake:49 (message):
  Command failed: 1

   '/gnu/store/6pn8kznkxr67w2r58zslai0mkhv0y0vq-cmake-3.19.2/bin/cmake' 
'-Dmake=' '-Dconfig=' '-P' 
'/home/rlemmon/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp/FASTJET-download-Release-impl.cmake'

  See also

    
/home/rlemmon/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp/FASTJET-download-*.log


make[2]: *** [CMakeFiles/FASTJET.dir/build.make:110: 
FASTJET-prefix/src/FASTJET-stamp/FASTJET-download] Error 1
make[1]: *** [CMakeFiles/Makefile2:95: CMakeFiles/FASTJET.dir/all] Error 2
make: *** [Makefile:103: all] Error 2
[e] sorry... the build failed: no fastjet-config in 
/home/rlemmon/heppy/external/fastjet/fastjet-3.3.3/bin/ 
-----------[ fastjet build script done ]----------- 
rlemmon@parton ~/heppy$ 
*********************************************************************************************************

Here are the FASTJET-stamp/FASTJET-download-*.log files:

*********************************************************************************************************
rlemmon@parton 
~/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp$ cat 
/home/rlemmon/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp/FASTJET-download-out.log
-- File already exists but no hash specified (use URL_HASH):
  file='/home/rlemmon/heppy/external/fastjet/downloads/fastjet-3.3.3.tar.gz'
Old file will be removed and new file downloaded from URL.
-- Downloading...
   dst='/home/rlemmon/heppy/external/fastjet/downloads/fastjet-3.3.3.tar.gz'
   timeout='none'
   inactivity timeout='none'
-- Using src='http://fastjet.fr/repo/fastjet-3.3.3.tar.gz'
rlemmon@parton 
~/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp$
**********************************************************************************************************

**********************************************************************************************************
rlemmon@parton 
~/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp$ cat 
/home/rlemmon/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp/FASTJET-download-err.log
CMake Error at FASTJET-stamp/download-FASTJET.cmake:127 (file):
  file /home/rlemmon/.guix-profile/etc/ssl/certs/ca-certificates.crt


CMake Error at FASTJET-stamp/FASTJET-download-Release-impl.cmake:9 (message):
  Command failed (1):

   '/gnu/store/6pn8kznkxr67w2r58zslai0mkhv0y0vq-cmake-3.19.2/bin/cmake' '-P' 
'/home/rlemmon/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp/download-FASTJET.cmake'


rlemmon@parton 
~/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp$ 
***********************************************************************************************************

Finally, a version that works which is inside a Docker container using
Debian as the base (but there are other things that so not work there):

************************************************************************************************************
I have no name!@e02d8f074dce 
~/matplo/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp$ 
cat 
/home/rlemmon/matplo/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp/FASTJET-download-out.log
-- Downloading...
   
dst='/home/rlemmon/matplo/heppy/external/fastjet/downloads/fastjet-3.3.3.tar.gz'
   timeout='none'
-- Using src='http://fastjet.fr/repo/fastjet-3.3.3.tar.gz'
-- [download 0% complete]
-- [download 1% complete]
-- [download 2% complete]
-- [download 3% complete]
-- [download 4% complete]
-- [download 5% complete]
-- [download 6% complete]
-- [download 7% complete]
-- [download 8% complete]
-- [download 9% complete]
-- [download 10% complete]
-- [download 11% complete]
-- [download 12% complete]
-- [download 13% complete]
-- [download 14% complete]
-- [download 15% complete]
-- [download 16% complete]
-- [download 17% complete]
-- [download 18% complete]
-- [download 19% complete]
-- [download 20% complete]
-- [download 21% complete]
-- [download 22% complete]
-- [download 23% complete]
-- [download 24% complete]
-- [download 25% complete]
-- [download 26% complete]
-- [download 27% complete]
-- [download 28% complete]
-- [download 29% complete]
-- [download 30% complete]
-- [download 31% complete]
-- [download 32% complete]
-- [download 33% complete]
-- [download 34% complete]
-- [download 35% complete]
-- [download 36% complete]
-- [download 37% complete]
-- [download 38% complete]
-- [download 39% complete]
-- [download 40% complete]
-- [download 41% complete]
-- [download 42% complete]
-- [download 43% complete]
-- [download 44% complete]
-- [download 45% complete]
-- [download 46% complete]
-- [download 47% complete]
-- [download 48% complete]
-- [download 49% complete]
-- [download 50% complete]
-- [download 51% complete]
-- [download 52% complete]
-- [download 53% complete]
-- [download 54% complete]
-- [download 55% complete]
-- [download 56% complete]
-- [download 57% complete]
-- [download 58% complete]
-- [download 59% complete]
-- [download 60% complete]
-- [download 61% complete]
-- [download 62% complete]
-- [download 63% complete]
-- [download 64% complete]
-- [download 65% complete]
-- [download 66% complete]
-- [download 67% complete]
-- [download 68% complete]
-- [download 69% complete]
-- [download 70% complete]
-- [download 71% complete]
-- [download 72% complete]
-- [download 73% complete]
-- [download 74% complete]
-- [download 75% complete]
-- [download 76% complete]
-- [download 77% complete]
-- [download 78% complete]
-- [download 79% complete]
-- [download 80% complete]
-- [download 81% complete]
-- [download 82% complete]
-- [download 83% complete]
-- [download 84% complete]
-- [download 85% complete]
-- [download 86% complete]
-- [download 87% complete]
-- [download 88% complete]
-- [download 89% complete]
-- [download 90% complete]
-- [download 91% complete]
-- [download 92% complete]
-- [download 93% complete]
-- [download 94% complete]
-- [download 95% complete]
-- [download 96% complete]
-- [download 97% complete]
-- [download 98% complete]
-- [download 99% complete]
-- [download 100% complete]
-- Downloading... done
-- extracting...
     
src='/home/rlemmon/matplo/heppy/external/fastjet/downloads/fastjet-3.3.3.tar.gz'
     
dst='/home/rlemmon/matplo/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET'
-- extracting... [tar xfz]
-- extracting... [analysis]
-- extracting... [rename]
-- extracting... [clean up]
-- extracting... done
I have no name!@e02d8f074dce 
~/matplo/heppy/external/fastjet/build_fastjet/FASTJET-prefix/src/FASTJET-stamp$ 
*************************************************************************************************************************************

So you see I think I have a problem with Guix, cmake and the
certificates here.

Thanks
Roy



Leo Famulari <leo@famulari.name> writes:

> On Sat, May 08, 2021 at 04:24:15PM +0100, Roy Lemmon wrote:
>> Hi,
>> 
>> I have an issue with a program I would like to install. It uses
>> cmake to download and make the executable. However when I download
>> the file, which is a tar.gz file, the file is downloaded ok but then
>> is never extracted. Cmake then crashes.
>> 
>> I am assuming that there is an issue with the certificates or perhaps curl 
>> etc. That is what the logfile says.
>
> I think you forgot to include the logfile.