[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
status of CVS head on mingw
|
From: |
Bob Friesenhahn |
|
Subject: |
status of CVS head on mingw |
|
Date: |
Tue, 31 Aug 2004 23:27:46 -0500 (CDT) |
While it is possible to bootstrap CVS head under mingw, things do not
currently look good. Testing is with Autoconf 2.59 and Automake
1.9.1. The following is the *actual output* from a libtool configure
run:
##
----------------------------------------------------------------------------- ##
## Configuring libtool (Build:2004-09-01 Ralf Wildenhues <address@hidden>
##
----------------------------------------------------------------------------- ##
## -------------------------------------------------------- ##
* libltdl/loaders/preopen.c: Initialise memory in get_vtable.
## -------------------------------------------------------- ##
## -------------------------------------------------- ##
* tests/sh.test: Look in the source tree for ltmain.sh.
## -------------------------------------------------- ##
## ------------------------------------- ##
2004-09-01 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## -------------------------------------------------- ##
Don't use C99 flexible array types as we want to be C89
## -------------------------------------------------- ##
## ----------------------------------------------------------- ##
compatible. Instead, revert to the old way of doing things with
## ----------------------------------------------------------- ##
## ------------------------------------------------------------ ##
an array of symbol name vs. address, and adding the originator as
## ------------------------------------------------------------ ##
## ------------------------------------ ##
the first symbol but with a NULL address:
## ------------------------------------ ##
## ---------------------------------------------------------- ##
* config/ltmain.in (func_extract_dlsyms): Store originator as a
## ---------------------------------------------------------- ##
## --------------- ##
NULL address symbol.
## --------------- ##
## ----------------------------------- ##
* libltdl/ltdl.h (lt_dlsymbol): Removed.
## ----------------------------------- ##
## ----------------------------------- ##
(lt_dlsymlist): Remove originator field.
## ----------------------------------- ##
## -------------------------------- ##
(LTDL_SET_PRELOADED_SYMBOLS): Adjust.
## -------------------------------- ##
## ----------------------------------------------------------- ##
* libltdl/loaders/preopen.c (vm_open, lt_dlpreload_open): Adjust
## ----------------------------------------------------------- ##
## --------- ##
for new types.
## --------- ##
## -------------------------------------------------------- ##
(vm_sym): Skip the new originator symbol when scanning symbol
## -------------------------------------------------------- ##
## - ##
names.
## - ##
## ------------------------------------------------------------- ##
* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Adjust preloaded symbols
## ------------------------------------------------------------- ##
## -------------- ##
test file to match.
## -------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## -------------------------------------- ##
Reported by Andreas Schwab <address@hidden>
## -------------------------------------- ##
## ------------------------------------- ##
2004-09-01 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ---------------------------------------------------------- ##
Libtool currently assumes that certain characteristics, such as
## ---------------------------------------------------------- ##
## --------------------------------------------------------- ##
enable_shared, apply to the host architecture rather than per-
## --------------------------------------------------------- ##
## ---------------------------------------------------------- ##
language. Running the tests over a broken compiler can corrupt
## ---------------------------------------------------------- ##
## --------------------------------------------------------- ##
these values, when there is no C++ compiler for example, so we
## --------------------------------------------------------- ##
## --------------------------------- ##
skip most of the tests in those cases.
## --------------------------------- ##
## ------------------------------------------------------------ ##
* m4/libtool.m4 (_LT_LANG_CXX_CONFIG): If caught_CXX_compiler was
## ------------------------------------------------------------ ##
## -------------------------------------------------------- ##
set from configure.ac, then don't run all the compiler tests.
## -------------------------------------------------------- ##
## ---------------------------------------------------- ##
(_LT_LANG_F77_CONFIG): Similarly for caught_F77_compiler.
## ---------------------------------------------------- ##
## ------------------------------------- ##
2004-08-31 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## --------------------------------------------------------- ##
* Makefile.am (clean-ltmain-sh): Remove stale config/ltmain.sh
## --------------------------------------------------------- ##
## ------------------------------------------------------------ ##
from the build tree that were left behind by previous versions of
## ------------------------------------------------------------ ##
## --- ##
libtool.
## --- ##
## -------------------------------------------------------- ##
($top_srcdir)/stamp-vcl: Since this rule is already called on
## -------------------------------------------------------- ##
## ------------------------------------------------------ ##
every invocation of make, hook clean-ltmain-sh in here too.
## ------------------------------------------------------ ##
## ------------------------------------------------ ##
Suggested by Ralf Wildenhues <address@hidden>
## ------------------------------------------------ ##
## ----------------------------------------------- ##
2004-08-31 Ralf Wildenhues <address@hidden>
## ----------------------------------------------- ##
## ------------------------------------------------------ ##
* bootstrap: Update warning message to reflect having split
## ------------------------------------------------------ ##
## ------------------------- ##
libtool.m4 into several files.
## ------------------------- ##
## ---------------------------------------------------------- ##
Also, add config/ltmain.sh to list of stale files from previous
## ---------------------------------------------------------- ##
## ----------------------------------- ##
versions to be removed before bootstrap.
## ----------------------------------- ##
## -------------------------------------------- ##
* libltdl/ltdl.c: Replace strdup with lt__strdup.
## -------------------------------------------- ##
## ------------------------------------- ##
2004-08-30 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------ ##
* config/ltmain.in: Double quote even $# for the sake of sh.test.
## ------------------------------------------------------------ ##
## ------------------------------------------------------------- ##
(exec_cmd): Be careful about "`\"foo\"`" quoting, even in comments
## ------------------------------------------------------------- ##
## ------------------------------------ ##
to avoid triggering the tests in sh.test.
## ------------------------------------ ##
## ------------------------------------------------------- ##
* configure.ac: Because of the way the autoconf C++ testing
## ------------------------------------------------------- ##
## ------------------------------------------------------------ ##
works, we need to call the C test first to work in an environment
## ------------------------------------------------------------ ##
## -------------------- ##
that has no C++ compiler.
## -------------------- ##
## --------------------------------------------------------- ##
* libltdl/lt_dlloader.c (lt_dlloader_remove): Since the return
## --------------------------------------------------------- ##
## ----------------------------------------------------------- ##
value of this function is often passed to free, don't declare it
## ----------------------------------------------------------- ##
## ------------------------------------------------------- ##
`const'. Responsibility for this memory is given back to the
## ------------------------------------------------------- ##
## ------------ ##
caller on return.
## ------------ ##
## ----------------------------------------------- ##
* libltdl/lt_dlloader.h (lt_dlloader_remove): Ditto.
## ----------------------------------------------- ##
## -------------------------------- ##
* libltdl/ltdl.c (lt_dlexit): Adjust.
## -------------------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## -------------------------------------- ##
2004-08-30 Andreas Schwab <address@hidden>
## -------------------------------------- ##
## -------------------------------------------- ##
* libltdl/ltdl.c (lt_dlexit): Remove lvalue cast.
## -------------------------------------------- ##
## ----------------------------------------------- ##
* libltdl/slist.h (SListCallback): Fix missing type.
## ----------------------------------------------- ##
## ------------------------------------ ##
* config/ltmain.in: Accept --mode=relink.
## ------------------------------------ ##
## ------------------------------------- ##
2004-08-29 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## ---------------------------------- ##
* configure.ac: Bumped version to 1.9c.
## ---------------------------------- ##
## ------------------------- ##
GNU libtool 1.9b was released.
## ------------------------- ##
## ---------------------------------- ##
* configure.ac: Bumped version to 1.9b.
## ---------------------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## --------------------------------------------- ##
* INSTALL, config/config.guess, config/config.sub,
## --------------------------------------------- ##
## --------------------------------------------- ##
config/texinfo.tex: Updated from canonical source.
## --------------------------------------------- ##
## ------------------------------------------------------------ ##
* Makefile.maint, HACKING: Update instructions for releasing in a
## ------------------------------------------------------------ ##
## ------- ##
VPATH build.
## ------- ##
## ------------------------------------------------------ ##
* Makefile.am (dist-hook): Only run if README-alpha exists.
## ------------------------------------------------------ ##
## ---------------------------------------------------------- ##
* README.alpha: Renamed from README-alpha to stop automake from
## ---------------------------------------------------------- ##
## ---------------------------------- ##
automatically adding it to DIST_COMMON.
## ---------------------------------- ##
## --------------------------------- ##
* NEWS: Merge changes from branch-1-5.
## --------------------------------- ##
## ----------------------------------------------------------- ##
* Makefile.am (dist-hook): Always distribute just a README file,
## ----------------------------------------------------------- ##
## ------------------------------------------------------ ##
but take its contents from README-alpha for alpha releases.
## ------------------------------------------------------ ##
## ------------------------------------------------------------ ##
* TODO: Reformat. Removed some items that have been implemented.
## ------------------------------------------------------------ ##
## ------------------------------------- ##
2004-08-29 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------- ##
Add a new `-weak' flag to tell libtool when not to propogate
## ------------------------------------------------------- ##
## ------------------------------------------------------ ##
dependency libraries from dlpreopened modules to libraries:
## ------------------------------------------------------ ##
## ---------------------------------------------------------- ##
* config/ltmain.in: Support new -weak link mode option. Adjust
## ---------------------------------------------------------- ##
## -------- ##
help message.
## -------- ##
## ----------------------------------------------- ##
* libltdl/Makefile.am (libltdlc_la_LDFLAGS): Use it.
## ----------------------------------------------- ##
## ----------------------------------------------------------- ##
* doc/libtool.texi (Linking with dlopened modules): Document it.
## ----------------------------------------------------------- ##
## ---------------------- ##
(Link mode): Mention -weak.
## ---------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## ------------------------------------- ##
2004-08-29 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
* config/ltmain.in (opt_help): Defer showing help messages until
## ----------------------------------------------------------- ##
## ------------------------------------------------------------ ##
after a possible following --mode argument has been parsed, so we
## ------------------------------------------------------------ ##
## ---------------------------------- ##
can handle `libtool --help --mode=foo'.
## ---------------------------------- ##
## ------------------------------------- ##
2004-08-29 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
We have had shell functions in ltmain.in for a few years without
## ----------------------------------------------------------- ##
## -------------------------------------------------------- ##
complaint now, and recently a few more have crept in. Make a
## -------------------------------------------------------- ##
## -------------------------------------------------- ##
start at refactoring the code with shell functions, and
## -------------------------------------------------- ##
## --------------------------------- ##
standardising on option parsing style:
## --------------------------------- ##
## --------------------------------------------------- ##
* config/ltmain.in (func_echo, func_verbose, func_error)
## --------------------------------------------------- ##
## ------------------------------------------------ ##
(func_fatal_error, func_fatal_help, func_missing_arg)
## ------------------------------------------------ ##
## ---------------------------------------------------- ##
(func_version, func_usage, func_help): Boiler plate shell
## ---------------------------------------------------- ##
## --------------------------------------------------------- ##
functions mostly copied from libtoolize.in. Changed *lots* of
## --------------------------------------------------------- ##
## ------------------------------------------------------------- ##
shell snippets to call these functions as appropriate, rather than
## ------------------------------------------------------------- ##
## -------------------------------- ##
inlining the same code over and over.
## -------------------------------- ##
## --------------------------------------------------------- ##
(func_config, func_features, func_enable_tag, func_mode_help):
## --------------------------------------------------------- ##
## --------------------------------------------------------- ##
Factored out from the shared option parsing loop. Write a new
## --------------------------------------------------------- ##
## -------------------------------------------------- ##
shared option parser based on the one in libtoolize.in.
## -------------------------------------------------- ##
## ------------------------------------------------------ ##
(func_check_version_match): Factored out from global scope.
## ------------------------------------------------------ ##
## --------------------------------------------------- ##
(func_mode_compile, func_mode_execute, func_mode_finish)
## --------------------------------------------------- ##
## ---------------------------------------------------------- ##
(func_mode_install, func_mode_link, func_mode_uninstall): Break
## ---------------------------------------------------------- ##
## ----------------------------------------------------------- ##
each of the top level mode handlers out into a function. Adjust
## ----------------------------------------------------------- ##
## ----- ##
main loop.
## ----- ##
## ------------------------------------------------------- ##
(modename, prevopt, prev, optarg, show_help): Removed in the
## ------------------------------------------------------- ##
## ------------------------------------------ ##
course of cleaning up the shared option parser.
## ------------------------------------------ ##
## ------------------------------------------------------------- ##
(opt_duplicate_deps): Use `:' and `false' instead of `yes' and `',
## ------------------------------------------------------------- ##
## ----------------------------------------------- ##
so we can run it directly, rather than calling test.
## ----------------------------------------------- ##
## ------------------------------------- ##
2004-08-28 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------- ##
To help users submit better bug reports, improve the general
## ------------------------------------------------------- ##
## ------------------------------------------------------------- ##
instructions, and provide additional useful info alongside the bug
## ------------------------------------------------------------- ##
## ------------------------------ ##
reporting address in --help output:
## ------------------------------ ##
## ------------------------------------------ ##
* Makefile.am (edit): Substitute $host_triplet.
## ------------------------------------------ ##
## ------------------------------------------------- ##
* libtoolize.in: Output useful debug info with --help.
## ------------------------------------------------- ##
## --------------------- ##
* config/ltmain.in: Ditto.
## --------------------- ##
## -------------------------------------- ##
* README: Rewritten. Added copyright info.
## -------------------------------------- ##
## -------------------------------------------- ##
* README-alpha: Rewritten. Added copyright info.
## -------------------------------------------- ##
## --------------------------------------------------- ##
* HACKING: New file, partly taken from old README-alpha.
## --------------------------------------------------- ##
## ------------------------------------- ##
2004-08-27 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------- ##
Two things to stop `make distcheck' from trying to rebuild
## ----------------------------------------------------- ##
## ---------------------------------------------------------- ##
distributed files (m4/ltversion.m4 and config/ltmain.in) in the
## ---------------------------------------------------------- ##
## ---------------- ##
readonly source tree:
## ---------------- ##
## --------------------------------------------------------- ##
* Makefile.am (stamp-vcl): Keep only one copy of stamp-vcl; in
## --------------------------------------------------------- ##
## ---------------------------------------------------------- ##
$(top_srcdir), so that an up-to-date version is rolled into the
## ---------------------------------------------------------- ##
## -------------------------------- ##
dist tarball even from a VPATH build.
## -------------------------------- ##
## ------------------------------------------------------ ##
($(top_srcdir)/config/ltmain.sh): Don't depend on Makefile,
## ------------------------------------------------------ ##
## ------------------------------------------------------------ ##
otherwise ltmain.sh needs to be rebuilt after every config.status
## ------------------------------------------------------------ ##
## ------------------------------------------------------- ##
run, and then configure needs to be rebuilt, and it all goes
## ------------------------------------------------------- ##
## ------------------------------------------------------------ ##
horribly wrong :-/ Unfortunately, we can't depend on Makefile.am
## ------------------------------------------------------------ ##
## ---------------------------------------------------------- ##
either, because that is a circular dependency. The downside of
## ---------------------------------------------------------- ##
## -------------------------------------------------------- ##
this change is that it is now possible to edit Makefile.am to
## -------------------------------------------------------- ##
## ---------------------------------------------------- ##
change the way ltmain.sh is generated, and the dependency
## ---------------------------------------------------- ##
## ---------------------------------------------------- ##
information can't tell that ltmain.sh needs regenerating.
## ---------------------------------------------------- ##
## ------------------------------------- ##
2004-08-27 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## --------------------------------------------------------- ##
* doc/libtool.texi (Cheap tricks): Escape the `@' for texinfo.
## --------------------------------------------------------- ##
## ------------------------------------- ##
2004-08-27 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
* doc/libtool.texi (Cheap tricks): Fix the instructions for making
## ------------------------------------------------------------- ##
## --------------------------------------------------------- ##
a ltmain.in wrapping libtool in light of recent changes to the
## --------------------------------------------------------- ##
## ----------------- ##
version checking code.
## ----------------- ##
## --------------------------------------- ##
2004-08-26 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## ---------------------------------------------------------- ##
* config/ltmain.in [darwin]: Use the -dylib_file flag and avoid
## ---------------------------------------------------------- ##
## ---------------------------------- ##
linking to so many libraries on darwin.
## ---------------------------------- ##
## ----------------------------------------------------------- ##
* m4/libtool.m4 [darwin]: Don't use a libname triplet, a couplet
## ----------------------------------------------------------- ##
## ------------- ##
is perfectly fine.
## ------------- ##
## -------------------------------------------------------- ##
* m4/ltdl.m4: Don't use the dyld loader on darwin 8 or later.
## -------------------------------------------------------- ##
## -------------------------------------- ##
2004-08-25 Paolo Bonzini <address@hidden>
## -------------------------------------- ##
## --------------------------------------------------------- ##
* config/ltmain.in (piecewise linking): Use a GNU ld script if
## --------------------------------------------------------- ##
## ---- ##
possible.
## ---- ##
## ---------------------------------------------------- ##
* m4/libtool.m4 (_LT_LINKER_SHLIBS): Add per-tag variable
## ---------------------------------------------------- ##
## ------- ##
with_gnu_ld.
## ------- ##
## ----------------------------------------------------------- ##
(_LT_LANG_CXX_CONFIG): Don't set unused variable with_gnu_ldcxx.
## ----------------------------------------------------------- ##
## ------------------------------------- ##
2004-08-22 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
The Grand Renaming. In preparation for libtool-2.0, move all of
## ----------------------------------------------------------- ##
## --------------------------------------------------------- ##
the many and varied m4 symbols accumulated by libtool over the
## --------------------------------------------------------- ##
## ------------------------------------------------------------- ##
years, considering also that modern autoconf can detect unexpanded
## ------------------------------------------------------------- ##
## ------------------------------------ ##
macros even without AC in the macro name:
## ------------------------------------ ##
## ------------------------------------------------------- ##
* bootstrap: Remove libltdl/config.h from previous releases.
## ------------------------------------------------------- ##
## ---------------------------------------------------------- ##
* m4/libtool.m4, m4/ltdl.m4, doc/libtool.texi: Basically, run a
## ---------------------------------------------------------- ##
## ------------------------------ ##
giant sed transformation like this:
## ------------------------------ ##
## -------------------- ##
s,AC_LIB_LTDL,LTDL_INIT,g
## -------------------- ##
## -------------------------------------- ##
s,AC_LIBLTDL_CONVENIENCE,LTDL_CONVENIENCE,g
## -------------------------------------- ##
## -------------------------------------- ##
s,AC_LIBLTDL_INSTALLABLE,LTDL_INSTALLABLE,g
## -------------------------------------- ##
## ------------------------ ##
s,AC_WITH_LTDL,LT_WITH_LTDL,g
## ------------------------ ##
## ---------------------------------------- ##
s,AC_LTDL_ENABLE_INSTALL,_LT_ENABLE_INSTALL,g
## ---------------------------------------- ##
## --------------------------------------------- ##
s,AC_DEPLIBS_CHECK_METHOD,_LT_CHECK_MAGIC_METHOD,g
## --------------------------------------------- ##
## --------------------------------- ##
s,AC_LIBTOOL_OBJDIR,_LT_CHECK_OBJDIR,g
## --------------------------------- ##
## ------------------------------ ##
s,AC_LTDL_OBJDIR,_LT_CHECK_OBJDIR,g
## ------------------------------ ##
## ------------------------------------ ##
s,AC_LTDL_DLPREOPEN,_LT_CHECK_DLPREOPEN,g
## ------------------------------------ ##
## ---------------------------------------- ##
s,AC_LIBTOOL_SYS_MAX_CMD_LEN,LT_CMD_MAX_LEN,g
## ---------------------------------------- ##
## ------------------------------------------------------- ##
s,AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE,_LT_CMD_GLOBAL_SYMBOLS,g
## ------------------------------------------------------- ##
## --------------------------------------------- ##
s,AC_LIBTOOL_SYS_OLD_ARCHIVE,_LT_CMD_OLD_ARCHIVE,g
## --------------------------------------------- ##
## ------------------------------------ ##
s,AC_PROG_LD_RELOAD_FLAG,_LT_CMD_RELOAD,g
## ------------------------------------ ##
## ---------------------------------------- ##
s,AC_LIBTOOL_SYS_LIB_STRIP,_LT_CMD_STRIPLIB,g
## ---------------------------------------- ##
## --------------------- ##
s,AC_CHECK_LIBM,LT_LIB_M,g
## --------------------- ##
## -------------------------- ##
s,AC_LTDL_DLLIB,LT_LIB_DLLOAD,g
## -------------------------- ##
## --------------------------------------------- ##
s,AC_LIBTOOL_COMPILER_OPTION,_LT_COMPILER_OPTION,g
## --------------------------------------------- ##
## -------------------------------------- ##
s,AC_LIBTOOL_PROG_CC_C_O,_LT_COMPILER_C_O,g
## -------------------------------------- ##
## ---------------------------------------------------- ##
s,AC_LIBTOOL_PROG_COMPILER_NO_RTTI,_LT_COMPILER_NO_RTTI,g
## ---------------------------------------------------- ##
## -------------------------------------------- ##
s,AC_LIBTOOL_PROG_COMPILER_PIC,_LT_COMPILER_PIC,g
## -------------------------------------------- ##
## ----------------------------------------------------- ##
s,AC_LIBTOOL_SYS_HARD_LINK_LOCKS,_LT_COMPILER_FILE_LOCKS,g
## ----------------------------------------------------- ##
## ---------------------------------------- ##
s,AC_LTDL_DLSYM_USCORE,LT_FUNC_DLSYM_USCORE,g
## ---------------------------------------- ##
## ----------------------------------------- ##
s,AC_LIBTOOL_LINKER_OPTION,_LT_LINKER_OPTION,g
## ----------------------------------------- ##
## ------------------------------------------ ##
s,AC_LIBTOOL_PROG_LD_SHLIBS,_LT_LINKER_SHLIBS,g
## ------------------------------------------ ##
## -------------------------------------------------------------- ##
s,AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH,_LT_LINKER_HARDCODE_LIBPATH,g
## -------------------------------------------------------------- ##
## --------------------------- ##
s,AC_PATH_MAGIC,_LT_PATH_MAGIC,g
## --------------------------- ##
## --------------------------------------- ##
s,AC_PATH_TOOL_PREFIX,_LT_PATH_TOOL_PREFIX,g
## --------------------------------------- ##
## -------------------- ##
s,AC_PROG_LD,LT_PATH_LD,g
## -------------------- ##
## ----------------------------- ##
s,AC_PROG_LD_GNU,_LT_PATH_LD_GNU,g
## ----------------------------- ##
## -------------------- ##
s,AC_PROG_NM,LT_PATH_NM,g
## -------------------- ##
## ----------------------------------------------- ##
s,AC_LTDL_SYS_DLOPEN_DEPLIBS,LT_SYS_DLOPEN_DEPLIBS,g
## ----------------------------------------------- ##
## ---------------------------------------- ##
s,AC_LIBTOOL_DLOPEN_SELF,LT_SYS_DLOPEN_SELF,g
## ---------------------------------------- ##
## ----------------------------------------------- ##
s,AC_LIBTOOL_POSTDEP_PREDEP,_LT_SYS_HIDDEN_LIBDEPS,g
## ----------------------------------------------- ##
## ----------------------------------------- ##
s,AC_LTDL_SYSSEARCHPATH,LT_SYS_DLSEARCH_PATH,g
## ----------------------------------------- ##
## --------------------------------- ##
s,AC_LTDL_SHLIBEXT,LT_SYS_MODULE_EXT,g
## --------------------------------- ##
## ----------------------------------- ##
s,AC_LTDL_SHLIBPATH,LT_SYS_MODULE_PATH,g
## ----------------------------------- ##
## ----------------------------------------- ##
s,AC_LTDL_SYMBOL_USCORE,LT_SYS_SYMBOL_USCORE,g
## ----------------------------------------- ##
## --------------------------------------------------- ##
s,AC_LIBTOOL_SYS_DYNAMIC_LINKER,_LT_SYS_DYNAMIC_LINKER,g
## --------------------------------------------------- ##
## ----------------------- ##
s,_LT_AC_TAGVAR,_LT_TAGVAR,g
## ----------------------- ##
## ----------------------------------- ##
s,_LT_AC_SYS_COMPILER,_LT_TAG_COMPILER,g
## ----------------------------------- ##
## ------------------------------------------------- ##
s,_LT_AC_PROG_ECHO_BACKSLASH,_LT_PROG_ECHO_BACKSLASH,g
## ------------------------------------------------- ##
## --------------------------------------------- ##
s,_LT_AC_SYS_LIBPATH_AIX,_LT_SYS_MODULE_PATH_AIX,g
## --------------------------------------------- ##
## ------------------------------- ##
s,_LT_AC_SHELL_INIT,_LT_SHELL_INIT,g
## ------------------------------- ##
## -------------------------- ##
s,_LT_AC_LOCK,_LT_ENABLE_LOCK,g
## -------------------------- ##
## ---------------------------------- ##
s,_LT_AC_CHECK_DLFCN,_LT_HEADER_DLFCN,g
## ---------------------------------- ##
## ----------------------------------------- ##
s,_LT_AC_TRY_DLOPEN_SELF,_LT_TRY_DLOPEN_SELF,g
## ----------------------------------------- ##
## ------------------------------ ##
s,LT_AC_PROG_EGREP,_LT_DECL_EGREP,g
## ------------------------------ ##
## -------------------------- ##
s,LT_AC_PROG_SED,_LT_DECL_SED,g
## -------------------------- ##
## ---------------------------------------------------------- ##
* doc/libtool.texi (Autoconf macros): Document exported macros.
## ---------------------------------------------------------- ##
## -------------------------------------------------------- ##
* libtoolize.in: Compare ltdl.m4 serial numbers for LTDL_INIT
## -------------------------------------------------------- ##
## ---------------------------------- ##
instead of newly obsoleted AC_LIB_LTDL.
## ---------------------------------- ##
## -------------------------------------------------- ##
(func_scan_files): Also set seen_ltdl for LTDL_INIT and
## -------------------------------------------------- ##
## -------- ##
LT_WITH_LTDL.
## -------- ##
## --------------------------------------- ##
2004-08-12 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## ---------------------------------------------------------- ##
* m4/libtool.m4 [GNU/linux] (AC_DEPLIBS_CHECK_METHOD): Cleanup,
## ---------------------------------------------------------- ##
## ----------------- ##
thanks to Daniel Reed.
## ----------------- ##
## ----------------------------------- ##
2004-08-11 Daniel Reed <address@hidden>
## ----------------------------------- ##
## ------------------------------------------------- ##
* tests/demo-nopic.test: Do not run on x86_64 or s390*
## ------------------------------------------------- ##
## ------------------------------------- ##
2004-08-06 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------ ##
* libltdl/ltdl.c (lt_dlforeachfile): LT_SYS_LIBSEARCH_PATH is not
## ------------------------------------------------------------ ##
## ----------------------------------------- ##
an environment variable, it is an actual path.
## ----------------------------------------- ##
## ---------------------------------------------------------- ##
* bootstrap: Remove `-f Makefile.am' now that we have an actual
## ---------------------------------------------------------- ##
## ----------------------- ##
Makefile to build ltmain.sh.
## ----------------------- ##
## -------------------------------------- ##
Reported by Noah Mish <address@hidden>
## -------------------------------------- ##
## ------------------------------------- ##
2004-08-05 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
* bootstrap: Run the bootstrap rules from a file named Makefile,
## ----------------------------------------------------------- ##
## --------------------------------------- ##
copied from Makefile.am for fresh checkouts.
## --------------------------------------- ##
## ----------------------------------------- ##
2004-08-05 Alexandre Duret-Lutz <address@hidden>
## ----------------------------------------- ##
## ----------------------------------------------------- ##
* m4/libtool.m4 (_LT_PROG_LTMAIN): Require ltmain.sh using
## ----------------------------------------------------- ##
## ------------------------------------ ##
using Autoconf's new AC_REQUIRE_AUX_FILE.
## ------------------------------------ ##
## ------------------------------------- ##
2004-08-05 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------- ##
* Makefile.am ($(top_srcdir)/config/ltmain.sh): Depends on
## ----------------------------------------------------- ##
## ---- ##
Makefile.
## ---- ##
## ------------------------------------------------------------- ##
(timestamp): Factor out timestamp setting and edit it based on the
## ------------------------------------------------------------- ##
## ---------------------------------------------------- ##
version number, so that it is empty for release versions.
## ---------------------------------------------------- ##
## ------------------------------------ ##
($(top_srcdir)/config/ltmain.sh): Use it.
## ------------------------------------ ##
## --------------- ##
(libtoolize): Ditto.
## --------------- ##
## ----------------------------------------- ##
* Makefile.am (libtool): Depends on ltmain.sh.
## ----------------------------------------- ##
## -------------------------------------- ##
(libtoolize): Set and substitute TIMESTAMP.
## -------------------------------------- ##
## ------------------------------------------------------- ##
* Makefile.am ($(top_srcdir)/config/ltmain.sh): Actually run
## ------------------------------------------------------- ##
## -------------------------------------------------------- ##
$(MKSTAMP) before changing directories, or it won't be found.
## -------------------------------------------------------- ##
## ----------------------------------- ##
Forgot to save before my last commit :-(
## ----------------------------------- ##
## -------------------------------------------------------------- ##
* Makefile.am ($(top_srcdir)/m4/ltversion.m4): Since we already did
## -------------------------------------------------------------- ##
## ------------------------------------------------------------- ##
`cd $(top_srcdir)' for this rule, we can't mv ltversion.tmp to the
## ------------------------------------------------------------- ##
## -------------------------------------------------------------- ##
relative $(top_srcdir) again! Also, run $(MKSTAMP) before changing
## -------------------------------------------------------------- ##
## ----------------------------- ##
directories, or it won't be found.
## ----------------------------- ##
## ----------------------------------- ##
($(top_srcdir)/config/ltmain.sh): Ditto.
## ----------------------------------- ##
## ----------------------------------------------- ##
(EXTRA_DIST): We should distribute ltversion.m4 too.
## ----------------------------------------------- ##
## --------------------------------------- ##
2004-08-04 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## --------------------------------------------------------------- ##
* m4/libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): Since CONFIG_SHELL may
## --------------------------------------------------------------- ##
## ------------------------------------------------------------- ##
not actually be set, we should use SHELL here, also make darn sure
## ------------------------------------------------------------- ##
## --------------------------------------------------------- ##
that SHELL is set to something. Bug from Willem Jan Palenstijn
## --------------------------------------------------------- ##
## ------------------------- ##
<address@hidden>.
## ------------------------- ##
## ---------------------------------------- ##
2004-08-03 Jacob Meuser <address@hidden>
## ---------------------------------------- ##
## -------------------------------------------------------------- ##
* ltmain.in: Allow some static libraries to be used in generating a
## -------------------------------------------------------------- ##
## ------------------------------------------------------------ ##
shared library on NetBSD and OpenBSD. match-pattern_regex decides
## ------------------------------------------------------------ ##
## ---------- ##
which are good.
## ---------- ##
## ------------------------------------------ ##
2004-08-02 Geoffrey Keating <address@hidden>
## ------------------------------------------ ##
## ----------------------------------------- ##
* m4/libtool.m4 [darwin]: Don't use -all_load.
## ----------------------------------------- ##
## ----------------------------------------------- ##
2004-08-01 Maciej W. Rozycki <address@hidden>
## ----------------------------------------------- ##
## --------------------------------------------------------------- ##
* m4/libtool.m4 (LT_AC_PROG_SED): Set SED when running from cache as
## --------------------------------------------------------------- ##
## ##
well.
## ##
## ------------------------------------- ##
2004-07-31 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
Although libtool is optimised to not need to subconfigure libltdl,
## ------------------------------------------------------------- ##
## --------------------------------------------------- ##
the installed libltdl sources for libtoolize need to put
## --------------------------------------------------- ##
## ------------------------------------------------------ ##
libltdl/configure.ac in the parent package so that *it* can
## ------------------------------------------------------ ##
## ---------------------------------------------------------- ##
subconfigure libltdl. That way we don't put any constraints on
## ---------------------------------------------------------- ##
## -------------------------------------------------- ##
the build system used by the parent package because the
## -------------------------------------------------- ##
## ------------------------------------------------------- ##
libtoolized libltdl subtree is a self-contained sub-project:
## ------------------------------------------------------- ##
## ------------------------------------------------ ##
* libltdl/Makefile.am (EXTRA_DIST): Add configure.ac.
## ------------------------------------------------ ##
## ----------------------------------------------- ##
(nobase_ltdldata_DATA): Change back to libltdl's own
## ----------------------------------------------- ##
## -------- ##
configure.ac.
## -------- ##
## ------------------------------------- ##
2004-07-30 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ---------------------------------------------------------- ##
My thanks to Alexandre Duret-Lutz <address@hidden> for the insight
## ---------------------------------------------------------- ##
## ----------------------------------------------------------- ##
required to write this changeset -- especially that ltmain.sh is
## ----------------------------------------------------------- ##
## ------------------------------------------------------ ##
the same on any machine for a given release, which I hadn't
## ------------------------------------------------------ ##
## -------------------------------------------------------- ##
noticed for some bizarre reason: It turns out that generating
## -------------------------------------------------------- ##
## ------------------------------------------------------- ##
distributed files from configure causes no end of hassle, as
## ------------------------------------------------------- ##
## --------------------------------------------------------- ##
evidenced by the many patches I've generated over the last few
## --------------------------------------------------------- ##
## --------------------------------------------------------- ##
days to try and get the dist and distcheck make rules to work.
## --------------------------------------------------------- ##
## ----------------------------------------------------------- ##
Instead of all that hair, we now simply generate our distributed
## ----------------------------------------------------------- ##
## ------------------------------------------------------- ##
files (now including ltmain.sh) with make rules -- and since
## ------------------------------------------------------- ##
## ------------------------------------------------------------ ##
automake creates make variables for all AC_SUBSTs, that is really
## ------------------------------------------------------------ ##
## ------------------------------------------------------ ##
easy. The code looks a lot more like automake and autoconf
## ------------------------------------------------------ ##
## ------------------------------------------------------------- ##
Makefile.ams now, and doesn't have all the rough edges the earlier
## ------------------------------------------------------------- ##
## -------------------------------------------------------- ##
hacky solution suffered from. We still generate libtool from
## -------------------------------------------------------- ##
## --------------------------------------------------------- ##
config.status, but that is not a distributed file, and doesn't
## --------------------------------------------------------- ##
## ------------------------------------------------------------ ##
break the golden rule. Besides, there is way more going on there
## ------------------------------------------------------------ ##
## ------------------------- ##
than a bunch of substitutions:
## ------------------------- ##
## ----------------------------------------------------------- ##
* Makefile.am (edit): New common sed substitutions for files now
## ----------------------------------------------------------- ##
## -------------------------------------- ##
generated by make instead of config.status.
## -------------------------------------- ##
## ----------------------------- ##
(CLEANFILES): Clean new tmp files.
## ----------------------------- ##
## ----------------------- ##
(EXTRA_DIST): Add ltmain.sh.
## ----------------------- ##
## ----------------- ##
(vcl-tmp): Reinstated.
## ----------------- ##
## --------------------------------------------------------- ##
(m4/ltversion.m4, config/ltmain.sh): New rules. Generate from
## --------------------------------------------------------- ##
## ------------------------- ##
here instead of config.status.
## ------------------------- ##
## --------------- ##
(libtoolize): Ditto.
## --------------- ##
## ---------------------------------------------------- ##
(libtool): Call config.status to regenerate if necessary.
## ---------------------------------------------------- ##
## ---------------- ##
(dist-hook): Removed.
## ---------------- ##
## ------------------------------------------ ##
* config/ltmain.in: Moved here from top_srcdir.
## ------------------------------------------ ##
## ------------------------------------------------------------ ##
* README-alpha: Update instructions to check AS_SHELL_SANITIZE is
## ------------------------------------------------------------ ##
## ------ ##
up to date.
## ------ ##
## ------------------------------------------------ ##
* bootstrap: Rewritten. Generate m4/ltversion.m4 and
## ------------------------------------------------ ##
## ---------------------------------------------- ##
config/ltmain.sh because configure depends on them.
## ---------------------------------------------- ##
## -------------------------------------------------------- ##
* configure.ac (AC_CONFIG_SRCDIR): Use libtoolize.in now that
## -------------------------------------------------------- ##
## --------------- ##
ltmain.in has moved.
## --------------- ##
## ----------------------------------------------- ##
(AC_CONFIG_FILES): Don't generate distributed files,
## ----------------------------------------------- ##
## ------------------------------------------------------------ ##
config/ltmain.sh and libtoolize from config.status. We have make
## ------------------------------------------------------------ ##
## ---------------- ##
rules to do that now.
## ---------------- ##
## --------------------------------------- ##
2004-07-30 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## -------------------------------------------------------- ##
* m4/libtool.m4, ltmain.in: readd the comments that I erased.
## -------------------------------------------------------- ##
## ---------------------------------------------------------- ##
* ltmain.in [darwin]: We already had a module var, there can be
## ---------------------------------------------------------- ##
## ---- ##
only one.
## ---- ##
## ------------------------------------------------------------- ##
* m4/libtool.m4, ltmain.in: autoconf now says the best thing to do
## ------------------------------------------------------------- ##
## ------------------------------------------------------------ ##
with CDPATH is to (unset CDPATH) >/dev/null 2>&1 && unset CDPATH,
## ------------------------------------------------------------ ##
## ---- ##
so do it.
## ---- ##
## ------------------------------------- ##
2004-07-29 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------ ##
* Makefile.am ($(top_srcdir)/config/ltmain.sh): Ugh. More hair to
## ------------------------------------------------------------ ##
## ------------------------------------------------------- ##
help `make distcheck'; not only do we have to make a copy of
## ------------------------------------------------------- ##
## ----------------------------------------------------------- ##
ltmain.sh available in the source tree, but we have to be really
## ----------------------------------------------------------- ##
## ------------------------------------------------------------- ##
careful about permission bit twiddling when we copy it across into
## ------------------------------------------------------------- ##
## ------------------------------------------------- ##
the possible read-only $(top_srcdir)/config directory!
## ------------------------------------------------- ##
## ----------------------------------------------------------- ##
* tests/tagtrace.test: Skip this test when running a VPATH build
## ----------------------------------------------------------- ##
## --------------------------------------------------------- ##
against a read-only source tree (as in distcheck for example),
## --------------------------------------------------------- ##
## ------------------------------------------------------- ##
since autoconf wants to write temporary files in $top_srcdir
## ------------------------------------------------------- ##
## ----- ##
otherwise.
## ----- ##
## ------------------------------------------------------------ ##
* Makefile.am ($(top_srcdir)/config/ltmain.sh): Automake assumes,
## ------------------------------------------------------------ ##
## ------------------------------------------------------------- ##
quite rightly for every project except libtool, that there will be
## ------------------------------------------------------------- ##
## --------------------------- ##
an ltmain.sh in the source tree.
## --------------------------- ##
## ------------------------------------------- ##
(EXTRA_DIST): As do the dist rules it generates.
## ------------------------------------------- ##
## ---------------------------------------------------------- ##
(dist-hook): Even though we definitely don't want to distribute
## ---------------------------------------------------------- ##
## --------------- ##
our local ltmain.sh.
## --------------- ##
## ---------------------------------------------------------- ##
* config/config.guess, config/config.sub: Don't check these in,
## ---------------------------------------------------------- ##
## ---------------------------------------------------------- ##
they cause spurious conflicts on cvs commit and update, and are
## ---------------------------------------------------------- ##
## -------------------------- ##
added by bootstrap in any case.
## -------------------------- ##
## -------------------------------------------------------- ##
* configure.ac (AC_INIT): Revert an accidental commit from my
## -------------------------------------------------------- ##
## ----------------------- ##
testing of package_revision.
## ----------------------- ##
## ----------------------------------------- ##
2004-07-29 Alexandre Duret-Lutz <address@hidden>
## ----------------------------------------- ##
## ---------------------------------- ##
* doc/libtool.texi (Tags): Document CC.
## ---------------------------------- ##
## ------------------------------------------------------------ ##
* m4/libtool.m4 (_LT_SETUP): Register CC as supported tag so that
## ------------------------------------------------------------ ##
## ------------ ##
Automake uses it.
## ------------ ##
## ------------------------------------- ##
2004-07-28 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ---------------------------------------------------------- ##
Fix a long-standing bug where macro_version was always empty in
## ---------------------------------------------------------- ##
## ---------------------------------------------------- ##
the generated m4/ltversion.m4. Except for CVS revisions:
## ---------------------------------------------------- ##
## ------------------------------------------------------ ##
* ltmain.in (package_revision): Don't try to deduce it from
## ------------------------------------------------------ ##
## ------------------------------------------------------ ##
TIMESTAMP, since that is empty for release versions; simply
## ------------------------------------------------------ ##
## ----------- ##
substitute it...
## ----------- ##
## -------------------------------------------------- ##
* configure.ac (package_revision): ...from here, having
## -------------------------------------------------- ##
## ------------------------------------------------------------ ##
precalculated it before resetting TIMESTAMP for release versions.
## ------------------------------------------------------------ ##
## --------------------------------------------------------- ##
* bootstrap: Force regeneration of m4/ltversion.m4, but retain
## --------------------------------------------------------- ##
## ------------------------------------------- ##
timestamps if there is no change to the content.
## ------------------------------------------- ##
## ------------------------------------- ##
2004-07-28 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------ ##
To take full advantage of this, libtool must be bootstrapped with
## ------------------------------------------------------------ ##
## ------------------------------------------------------------- ##
CVS autoconf, otherwise pdksh chokes on some nested escaped quotes
## ------------------------------------------------------------- ##
## ------------------------------------------------------- ##
from libtool.m4. Using CVS autoconf protects configure from
## ------------------------------------------------------- ##
## ------------------------------------------------------ ##
non-bourne compatible shells in the same way this changeset
## ------------------------------------------------------ ##
## --------------------------- ##
protects libtool and libtoolize:
## --------------------------- ##
## --------------------------------------------------------- ##
* libtoolize.in: Include latest CVS autoconf AS_SHELL_SANITIZE
## --------------------------------------------------------- ##
## ---------------------------------------------------- ##
expansion to make various shells fully bourne compatible.
## ---------------------------------------------------- ##
## -------------- ##
* ltmain.in: Ditto.
## -------------- ##
## ------------------------------------------------------------- ##
* m4/libtool.m4 (AC_PATH_TOOL_PREFIX): Remove spurious quotes, the
## ------------------------------------------------------------- ##
## -------------------------------- ##
RHS of = assignment is not IFS split.
## -------------------------------- ##
## ------------------------ ##
(_LT_LANG_CXX_CONFIG): Ditto.
## ------------------------ ##
## ------------------------------ ##
(AC_LIBTOOL_POSTDEP_PREDEP): Ditto.
## ------------------------------ ##
## ------------------------------------- ##
2004-07-27 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------- ##
This change fixes another VPATH build bug, where the vcl.tmp
## ------------------------------------------------------- ##
## ------------------------------------------------------ ##
target forced a rebuild of stamp-vcl in the build tree (and
## ------------------------------------------------------ ##
## --------------------------------------------------------- ##
hence regeneration of m4/ltversion.m4, thus an automake driven
## --------------------------------------------------------- ##
## -------------------------------------------------------- ##
rebootstrap that doesn't know about $fakes) requiring a fresh
## -------------------------------------------------------- ##
## ---------------------------------- ##
./bootstrap after every cvs/tla update:
## ---------------------------------- ##
## ---------------------------- ##
* Makefile.am (vcl.tmp): Removed.
## ---------------------------- ##
## ------------------------------------------ ##
(stamp-vcl): Adopt former vcl.tmp target rules.
## ------------------------------------------ ##
## ------------------------------------- ##
2004-07-25 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
* ltmain.in: Make sure that dependency libraries of -dlpreopened
## ----------------------------------------------------------- ##
## ----------------------------- ##
libraries are propogated properly.
## ----------------------------- ##
## ------------------------------------- ##
2004-07-23 Joe Orton <address@hidden>
## ------------------------------------- ##
## ---------------------------------- ##
* libtool.m4: Treat bsdi5* like bsdi4*.
## ---------------------------------- ##
## --------------------------------------- ##
2004-07-22 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## ----------------------------------------------------- ##
* ltmain.in [darwin](func_extract_archives): $SED not sed.
## ----------------------------------------------------- ##
## ------------------------------------------------------------ ##
* ltmain.in [darwin](func_extract_archives): Clean up last commit
## ------------------------------------------------------------ ##
## ---------------------------------------------------------- ##
a little, some suggestions are from Albert Chin, those that are
## ---------------------------------------------------------- ##
## ----------- ##
broken are mine.
## ----------- ##
## ------------------------------------------------------- ##
* libltdl/Makefile.am, libltdl/loaders/Makefile.am: Look for
## ------------------------------------------------------- ##
## ------------------------------ ##
included files in the right places.
## ------------------------------ ##
## --------------------------------------- ##
2004-07-18 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## ------------------------------------------------------------ ##
* ltmain.in [darwin](func_extract_archives): Because fat archives
## ------------------------------------------------------------ ##
## ---------------------------------------------------------- ##
on darwin can not be extracted using ar, we need to use lipo to
## ---------------------------------------------------------- ##
## ------------------------------------------------------------ ##
extract the thin archives and then use lipo again to generate the
## ------------------------------------------------------------ ##
## ------------------------------------------------------------ ##
individual fat objects. This should allow people to run configure
## ------------------------------------------------------------ ##
## ----------------------------------------------------------- ##
with CC set to "cc -arch ppc -arch ppc64" or "cc -arch ppc -arch
## ----------------------------------------------------------- ##
## -------------------------------------------------------- ##
i386" or whatever to match the toolchain they have available.
## -------------------------------------------------------- ##
## -------------------------------------------- ##
2004-07-18 Greg Eisenhauer <address@hidden>
## -------------------------------------------- ##
## --------------------------------------------------------- ##
* libltdl/loaders/Makefile.am: Use AM_MAKEFLAGS not MAKEFLAGS.
## --------------------------------------------------------- ##
## --------------------------------------- ##
2004-07-18 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## --------------------------------------------------------------- ##
* libltdl/Makefile.am: Ensure that lt__dirent.h is part of the dist,
## --------------------------------------------------------------- ##
## ---------------------------------------------- ##
also make failed looking for configure.ac, look for
## ---------------------------------------------- ##
## ------------------------------ ##
$(top_srcdir)/configure.ac instead.
## ------------------------------ ##
## ------------------------------------- ##
2004-07-15 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## --------------------------------------------------- ##
* libltdl/lt__private.h (lt_dlhandle_struct): Renamed to
## --------------------------------------------------- ##
## ------------------------------------------ ##
lt__handle to better reflect the naming scheme.
## ------------------------------------------ ##
## --------------------------------------------------------- ##
* libltdl/ltdl.h (lt_dlhandle): Be truly opaque with a void *.
## --------------------------------------------------------- ##
## ------------------------------------------------- ##
* libltdl/lt_dlloader.c (lt_dlloader_remove): Party to
## ------------------------------------------------- ##
## ------------------------------------------------------ ##
lt__private.h, so use internal lt__handle instead of opaque
## ------------------------------------------------------ ##
## ------- ##
lt_dlhandle.
## ------- ##
## --------------------------------------------------------- ##
* libltdl/ltdl.c (LT_DLGET_FLAG, LT_DLSET_FLAG): Add a cast to
## --------------------------------------------------------- ##
## -------------------- ##
internal lt__handle type.
## -------------------- ##
## ------------------------------------------------------------ ##
(try_dlopen, tryall_dlopen, load_deplibs, unload_deplibs): Ditto.
## ------------------------------------------------------------ ##
## ------------------------------------------------------- ##
(lt_dlexit, lt_dlclose, lt_dlsym): Use lt__handle to iterate
## ------------------------------------------------------- ##
## -------------------- ##
throught the handle list.
## -------------------- ##
## ----------------------------------------------------- ##
(try_dlopen): Use lt__zalloc instead of MALLOC and memset.
## ----------------------------------------------------- ##
## ------------------------------------------------------------ ##
* libltdl/ltdl.h (lt_dlcaller_id): Be truly opaque with a void *.
## ------------------------------------------------------------ ##
## ----------------------------------------------------------- ##
(lt_dlhandle_interface): New callback type for filtering handles
## ----------------------------------------------------------- ##
## ----------------------------------- ##
according to the interface they present.
## ----------------------------------- ##
## ----------------------------------------------------- ##
* libltdl/ltdl.c (lt_dlcaller_register): Take an id and an
## ----------------------------------------------------- ##
## ---------------------------------------------- ##
interface check callback, and generate a caller_id.
## ---------------------------------------------- ##
## -------------------------------------------- ##
(iterator): New static variable for the use of...
## -------------------------------------------- ##
## --------------------------------------------------- ##
(lt_dlhandle_first): New function. Set the iterator for
## --------------------------------------------------- ##
## -------------------------------- ##
subsequent calls to lt_dlhandle_next.
## -------------------------------- ##
## ------------------------------------------------------------ ##
(lt_dlhandle_next): Either work as before when iterator is unset,
## ------------------------------------------------------------ ##
## ------------------------------------------------------------- ##
or else skip handles that fail the interface check in iterator set
## ------------------------------------------------------------- ##
## ---------------- ##
by lt_dlhandle_first.
## ---------------- ##
## --------------------------------------------- ##
* libltdl/ltdl.h (lt_dlhandle_first): Declaration.
## --------------------------------------------- ##
## ---------------------------------------------------------- ##
* doc/libtool.texi (User defined module data): Document the new
## ---------------------------------------------------------- ##
## ##
APIs.
## ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## ------------------------------------- ##
2004-07-15 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## -------------------------------------------------------- ##
Split lt_dlloader management into a separate file, and factor
## -------------------------------------------------------- ##
## ----------------------------------------------------------- ##
`loaders' list management into a new SList ADT. In the process,
## ----------------------------------------------------------- ##
## ------------------------------------------------------ ##
the API for writing loaders is a little cleaner, so all the
## ------------------------------------------------------ ##
## --------------------------------------------------- ##
existing loaders were tweaked to take advantage of that:
## --------------------------------------------------- ##
## ------------------------------------------------------- ##
* libltdl/slist.h, libltdl/slist.c: New files implementing a
## ------------------------------------------------------- ##
## ------------------------------------------------------- ##
generic singly linked list container ADT. The ADT is purely
## ------------------------------------------------------- ##
## -------------------------------------------------------- ##
internal, and none of its API's are visible from an installed
## -------------------------------------------------------- ##
## --- ##
libltdl.
## --- ##
## ---------------------------------------------------------- ##
* libltdl/lt_dlloader.h (lt_dlloader): Removed next field again
## ---------------------------------------------------------- ##
## ---------------------------------------------------- ##
:-) Renamed to lt_dlvtable for API. Changed all callers.
## ---------------------------------------------------- ##
## ---------------------------------------------------------- ##
(lt_dlloader_get): New function to turn an lt_dlloader into its
## ---------------------------------------------------------- ##
## ------------------ ##
associated lt_dlvtable.
## ------------------ ##
## -------------------------------------------------------- ##
(lt_dlloader_add): Removed unused data parameter. The caller
## -------------------------------------------------------- ##
## ----------------------------------------------------- ##
data belongs to (and is set by) the loader itself, not the
## ----------------------------------------------------- ##
## --------------------------------- ##
loader's client. Changed all callers.
## --------------------------------- ##
## ---------------------------------------------- ##
(lt_dlloader_name, lt_dlloader_data): Removed. Use
## ---------------------------------------------- ##
## ------------------- ##
lt_dlloader_get instead!
## ------------------- ##
## ------------------------------------ ##
* libltdl/lt__private.h: Include slist.h.
## ------------------------------------ ##
## --------------------------------------------------------- ##
(lt__alloc_die_callback): Add missing LT_SCOPE to declaration.
## --------------------------------------------------------- ##
## -------------------------------------------------- ##
(lt_dlhandle_struct): Use lt_dlvtable instead of opaque
## -------------------------------------------------- ##
## ------- ##
lt_dlloader.
## ------- ##
## ---------------------------------------------------------- ##
* libltdl/ltdl.c (lt_dlexit): Rewritten for the new loader API.
## ---------------------------------------------------------- ##
## ----------------------------------------------------------- ##
(loaders, lt_dlloader_add, lt_dlloader_remove, lt_dlloader_next,
## ----------------------------------------------------------- ##
## -------------------------------- ##
lt_dlloader_find): Moved from here...
## -------------------------------- ##
## ---------------------------------------------- ##
* libltdl/lt_dlloader.c ((loaders, lt_dlloader_add,
## ---------------------------------------------- ##
## --------------------------------------------------------- ##
lt_dlloader_remove, lt_dlloader_next, lt_dlloader_find): ...to
## --------------------------------------------------------- ##
## ------------------------------------------------ ##
here. And rewritten in terms of new SList interface.
## ------------------------------------------------ ##
## ------------------------------------------------------------- ##
* libltdl/ltdl.c (lt_dlexit, tryall_dlopen): Rewritten in terms of
## ------------------------------------------------------------- ##
## --------------------- ##
new lt_dlloader interface.
## --------------------- ##
## ---------------------------------------------------------- ##
* libltdl/Makefile.am (libdlloader_la_SOURCES): Add slist.h and
## ---------------------------------------------------------- ##
## ------------------------------------ ##
slist.c. Move lt_dlloader.h from here...
## ------------------------------------ ##
## ---------------------------- ##
(pkginclude_HEADERS): ...to here.
## ---------------------------- ##
## ----------------------------------------------------- ##
(libltdl_la_SOURCES): Add lt_dlloader.c and lt_dlloader.h.
## ----------------------------------------------------- ##
## ------------------------------------- ##
2004-07-15 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## --------------------------------------------- ##
Collapse two almost identical structures into one:
## --------------------------------------------- ##
## ------------------------------------------------- ##
* libltdl/lt_dlloader.h (lt_dlloader): Add next field.
## ------------------------------------------------- ##
## ------------------------------------------------------------ ##
* libltdl/ltdl.c (lt_user_dlloader): Remove entirely. Change all
## ------------------------------------------------------------ ##
## ---------------------------------------------------------- ##
callers to use lt_dlloader instead. Add a compatibility macro.
## ---------------------------------------------------------- ##
## ------------------------------------------------------- ##
(lt_dlloader_add): Remove copy and allocate stage, just hook
## ------------------------------------------------------- ##
## -------------------------- ##
directly into the loaders list.
## -------------------------- ##
## ------------------------------------- ##
2004-07-15 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------- ##
A cleaner way to access the private fields of an lt_dlhandle
## ------------------------------------------------------- ##
## ------------------------------------------- ##
than my move of the module field into lt_dlinfo:
## ------------------------------------------- ##
## ----------------------------------------------------------- ##
* libltdl/ltdl.c (lt_caller_data, lt_dlhandle_struct): Move from
## ----------------------------------------------------------- ##
## -- ##
here...
## -- ##
## -------------------------------------------------------- ##
* libltdl/lt__private.h (lt_caller_data, lt_dlhandle_struct):
## -------------------------------------------------------- ##
## --------------------------------------------- ##
...to here. And put the module field back here...
## --------------------------------------------- ##
## -------------------------------------------- ##
* libltdl/ltdl.h (lt_dlinfo): ...instead of here.
## -------------------------------------------- ##
## --------------------------------------------- ##
* libltdl/loaders/loadlibrary.c (vm_open): Adjust.
## --------------------------------------------- ##
## ------------------------------------- ##
2004-07-15 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
* libltdl/lt__private.h (streq, strneq): New macros to make strcmp
## ------------------------------------------------------------- ##
## ---------------------------------------------- ##
calls as used for simple comparison easier to read.
## ---------------------------------------------- ##
## ----------------------------------------------- ##
* libltdl/loaders/dyld.c, libltdl/loaders/preopen.c,
## ----------------------------------------------- ##
## -------------------- ##
libltdl/ltdl.c: Use them!
## -------------------- ##
## ------------------------------------- ##
2004-07-15 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
This pervasive changeset makes two intertwined deep changes to the
## ------------------------------------------------------------- ##
## ------------------------------------------------------------ ##
operation of libtool (neither would work alone). First, there is
## ------------------------------------------------------------ ##
## -------------------------------------------------------- ##
a new feature that allows libraries to preopen modules. This
## -------------------------------------------------------- ##
## --------------------------------------------------------- ##
entails a backwards incompatible change to the libltdl API for
## --------------------------------------------------------- ##
## ---------------------------------------------------------- ##
separating out the preloaded symbol lists by owner. Second, in
## ---------------------------------------------------------- ##
## ---------------------------------------------------------- ##
the tradition of "eating our own dogfood", libltdl now preloads
## ---------------------------------------------------------- ##
## ------------------------------------------------------------- ##
its own dlloaders. The internal API for dlloaders has also had to
## ------------------------------------------------------------- ##
## ------------------------------------------------------- ##
change in a backwards incompatible way in support of the new
## ------------------------------------------------------- ##
## ------------------------------------------------------------- ##
library preloading feature. If you don't use preloaded libraries,
## ------------------------------------------------------------- ##
## ----------------------------------------------------------- ##
you needn't change your project sources, though you will need to
## ----------------------------------------------------------- ##
## --------------------------------------------------------- ##
recompile against the new libltdl. The API changes are mostly
## --------------------------------------------------------- ##
## ----------------------------------------------------------- ##
confined to dlloaders, so you probably needn't worry about those
## ----------------------------------------------------------- ##
## ------------------------------------------------------------ ##
(unless you have written a custom loader that you want libltdl to
## ------------------------------------------------------------ ##
## ##
use):
## ##
## ---------------------------------------------------------- ##
* configure.ac (AC_CONFIG_FILES): Add libltdl/loaders/Makefile.
## ---------------------------------------------------------- ##
## ---------------------------------------------------------- ##
* libltdl/configure.ac (AC_CONFIG_FILES): Add loaders/Makefile.
## ---------------------------------------------------------- ##
## ----------------------------------------------------------- ##
* libltdl/loaders: New directory for module loaders, to simplify
## ----------------------------------------------------------- ##
## ------------------------------------------------------------ ##
Makefile rules, and to give the loaders themselves names that are
## ------------------------------------------------------------ ##
## ------------------------------ ##
unique in the first few characters.
## ------------------------------ ##
## ------------------------------------------------------------- ##
* libtoolize.in (func_copy_all_files): Copy recursively to pick up
## ------------------------------------------------------------- ##
## -------------------------- ##
the loaders directory contents.
## -------------------------- ##
## --------------------------------------------------------- ##
* libltdl/loaders/Makefile.am: New file. Move module building
## --------------------------------------------------------- ##
## ----------- ##
rules to here...
## ----------- ##
## ------------------------------- ##
* libltdl/Makefile.am: ...from here.
## ------------------------------- ##
## ------------------------------------------------------------ ##
(VERSION_INFO): Bumped version info to signify interface changes.
## ------------------------------------------------------------ ##
## ---------------------------------------------------- ##
(libltdl_la_CPPFLAGS, libltdlc_la_CPPFLAGS): Set LTDLOPEN
## ---------------------------------------------------- ##
## -------------------------- ##
appropriately for each library.
## -------------------------- ##
## ------------------------------------------------ ##
* libltdl/loader-dld_link.c, libltdl/loader-dlopen.c,
## ------------------------------------------------ ##
## ----------------------------------------------- ##
libltdl/loader-dyld.c, libltdl/loader-load_add_on.c,
## ----------------------------------------------- ##
## ------------------------------------------------- ##
libltdl/loader-loadlibrary.c libltdl/loader-preopen.c,
## ------------------------------------------------- ##
## ---------------------------------------- ##
libltdl/loader-shl_load.c: Moved from here...
## ---------------------------------------- ##
## -------------------------------------------------- ##
* libltdl/loaders/dld_link.c, libltdl/loaders/dlopen.c,
## -------------------------------------------------- ##
## ------------------------------------------------- ##
libltdl/loaders/dyld.c, libltdl/loaders/load_add_on.c,
## ------------------------------------------------- ##
## --------------------------------------------------- ##
libltdl/loaders/loadlibrary.c libltdl/loaders/preopen.c,
## --------------------------------------------------- ##
## ---------------------------------- ##
libltdl/loaders/shl_load.c: ...to here.
## ---------------------------------- ##
## ------------------------------------- ##
(get_vtable): New entry function for each.
## ------------------------------------- ##
## -------------------------------------------------------- ##
* libltdl/loaders/preopen.c (lt_dlsymlists_t): Replaced by...
## -------------------------------------------------------- ##
## ------------------------------------------------------------ ##
(symlist_chain): ...a new structure which maps lists of preloaded
## ------------------------------------------------------------ ##
## ----------------------------------- ##
symbols from the object that loads them.
## ----------------------------------- ##
## ------------------------------------------------------ ##
(lt_dlpreload_open): New function to automatically open all
## ------------------------------------------------------ ##
## ------------------------------------------------------ ##
preloaded modules belonging to a named object (ORIGINATOR).
## ------------------------------------------------------ ##
## ------------------------------------------------------------- ##
* libltdl/lt__alloc.c (lt__zalloc): New function to return a block
## ------------------------------------------------------------- ##
## -------------------- ##
of zeroed out new memory.
## -------------------- ##
## -------------------------------------------- ##
* libltdl/lt__alloc.h (lt__zalloc): Prototype it.
## -------------------------------------------- ##
## -------------------------------------------------------- ##
* libltdl/lt__private.h (lt__alloc_die_callback): Add missing
## -------------------------------------------------------- ##
## ----- ##
prototype.
## ----- ##
## -------------------------------------------- ##
(lt__error_strings): Make this opaque to callers.
## -------------------------------------------- ##
## ------------------------------------------------------------ ##
* libltdl/lt_error.c (lt__error_strings): Move the implementation
## ------------------------------------------------------------ ##
## --- ##
to here.
## --- ##
## ---------------------------------------------------------- ##
* libltdl/lt_dlloader.h (lt_user_dlloader): Add extra fields to
## ---------------------------------------------------------- ##
## ---------------------------------------------------------- ##
make originator focused preloading possible. *BREAKS BACKWARDS
## ---------------------------------------------------------- ##
## --------- ##
COMPATIBILITY*
## --------- ##
## ------------------------------------------------------ ##
(lt_dlloader_add): Take advantage of new fields to simplify
## ------------------------------------------------------ ##
## ---------- ##
paramater list.
## ---------- ##
## ---------------------------------------------------------- ##
* libltdl/lt_system.h (LT_STR): New ANSI stringification macro.
## ---------------------------------------------------------- ##
## ---------------------------------------- ##
(LT_CONC): Fix it to work from within macros.
## ---------------------------------------- ##
## --------------------------------------------------------- ##
* libltdl/ltdl.c (loader_init, loader_init_callback): Simplify
## --------------------------------------------------------- ##
## ------------ ##
dlloader loading.
## ------------ ##
## -------------------------------------------------------- ##
(get_vtable, preloaded_symbols): Point these at the preopen.c
## -------------------------------------------------------- ##
## --------------------------------- ##
symbols to bootstrap the loader chain.
## --------------------------------- ##
## ----------------------------------------------------------- ##
(lt_dlinit): Load the preopen dlloader manually, and then use it
## ----------------------------------------------------------- ##
## --------------------------------- ##
to load any other preloaded dlloaders.
## --------------------------------- ##
## --------------------------------------------------- ##
(lt_dlloader_add): Simplify parameter list. Populate new
## --------------------------------------------------- ##
## ------------------------------------------------- ##
fields. Chain new loaders according to priority field.
## ------------------------------------------------- ##
## ------------------------------------------------------- ##
* libltdl/ltdl.h (lt_dlsymlist): Add a new originator field.
## ------------------------------------------------------- ##
## --------------------------------------------------------- ##
(lt_dlpreload_callback_func): Type of a callback for automatic
## --------------------------------------------------------- ##
## --------------------- ##
lt_dlpreload_open loading.
## --------------------- ##
## ------------------------------------------------------ ##
(LTDL_SET_PRELOADED_SYMBOLS): Adjust to hook into preloaded
## ------------------------------------------------------ ##
## ----------------------------------- ##
symbols from the "@PROGRAM@" originator.
## ----------------------------------- ##
## -------------------------------------------------------------- ##
* tests/demo/dlmain.c (main): Use mangled preloaded_symbols symbol.
## -------------------------------------------------------------- ##
## ------------------------------------------------- ##
* tests/pdemo/longer_file_name_dlmain.c (main): Ditto.
## ------------------------------------------------- ##
## ------------------------------------------------------- ##
* ltmain.in: Don't spew spurious warnings when dlopening and
## ------------------------------------------------------- ##
## ---------------- ##
dlpreopening modules.
## ---------------- ##
## ----------------------------------------------------------- ##
(func_generate_dlsyms): Factored out from multiple copies in the
## ----------------------------------------------------------- ##
## ---------------------------------------------------- ##
rest of the code. Generate originator keyed symbol lists.
## ---------------------------------------------------- ##
## ----------------------------------------------------------- ##
(func_extract_archives): Also factored. Extract the contents of
## ----------------------------------------------------------- ##
## --------------------------------------------------------- ##
convenience archives for linking with dependent libraries when
## --------------------------------------------------------- ##
## ---------------------------- ##
--whole-archive is not available.
## ---------------------------- ##
## --------------------------------------------------------- ##
[darwin]: Don't try to link $old_library unless it exists, and
## --------------------------------------------------------- ##
## ------------ ##
$lib is a bundle.
## ------------ ##
## ------------------------------------------------------- ##
* m4/ltdl.m4 (AC_LTDL_DLLIB): Check for all possible dynamic
## ------------------------------------------------------- ##
## ------------------------------------------------------------- ##
loading libraries/apis rather that stopping when an acceptable one
## ------------------------------------------------------------- ##
## --------- ##
is discovered.
## --------- ##
## --------------------------------------------------------- ##
(LT_DLLOADERS): New variable for holding dlloaders that can be
## --------------------------------------------------------- ##
## ----- ##
preloaded.
## ----- ##
## ------------------------------------------ ##
* doc/libtool.texi: Document interface changes.
## ------------------------------------------ ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## --------------------------------------- ##
2004-07-12 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## --------------------------------------------------------------- ##
* m4/libtool.m4 [darwin]: Set whole_archive_flag_spec to '' for xlc,
## --------------------------------------------------------------- ##
## --------------------------------------------------------------- ##
or it does not pass it's tests. xlc passes -noall_load (the default)
## --------------------------------------------------------------- ##
## -------------------------------------------------------------- ##
and when -all_load is also specified Apple's /usr/bin/libtool barfs
## -------------------------------------------------------------- ##
## ---- ##
and dies.
## ---- ##
## ------------------------------------- ##
2004-07-07 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
* libltdl/ltdl.h (lt_dlinfo): Move private module field to here...
## ------------------------------------------------------------- ##
## ------------------------------------------------------------ ##
* libltdl/ltdl.c (lt_dlhandle_struct): ...from here. Changed all
## ------------------------------------------------------------ ##
## --- ##
callers.
## --- ##
## ------------------------------------------------------------- ##
* libltdl/loader-loadlibrary.c (sys_wll_open): Use new inteface to
## ------------------------------------------------------------- ##
## ------------------------------------------------------- ##
scan loaded handle->info.module fields for previously loaded
## ------------------------------------------------------- ##
## --- ##
modules.
## --- ##
## ------------------------------------------------------------- ##
* doc/libtool.texi (User defined module data): Document changes to
## ------------------------------------------------------------- ##
## --------- ##
the interface.
## --------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## -------------------------------------------- ##
Reported by Chuck Wilson <address@hidden>
## -------------------------------------------- ##
## ------------------------------ ##
2004-07-07 Brad <address@hidden>
## ------------------------------ ##
## ----------------------------------------- ##
* m4/libtool.m4: Fixes for the OpenBSD support
## ----------------------------------------- ##
## --------------------------------------- ##
2004-06-24 Noah Misch <address@hidden>
## --------------------------------------- ##
## -------------------------------------------------------- ##
* ltmain.in: Unset the zsh GLOB_SUBST option, which makes zsh
## -------------------------------------------------------- ##
## ------------------------------------------------------- ##
handle backslash quoting poorly, before doing anything else.
## ------------------------------------------------------- ##
## ------------------ ##
* tests/defs: Likewise.
## ------------------ ##
## ------------------------------------- ##
2004-06-21 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## --------------------------------------------------------- ##
* libtoolize.in (libtoolize_flags): With the --ltdl option, we
## --------------------------------------------------------- ##
## --------------------------------------------- ##
libtoolize the libltdl subdirectory automatically.
## --------------------------------------------- ##
## -------------------------------------------- ##
* m4/ltdl.m4 (AC_WITH_LTDL): Fix overquoted args.
## -------------------------------------------- ##
## --------------------------------------- ##
2004-06-21 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## --------------------------------------------------------------- ##
* ltmain.in (dependency_libs) [darwin]: Remove -framework stuff from
## --------------------------------------------------------------- ##
## ------------------------------------------------------------------ ##
dependency_libs. Instead, invent a new .la var "inherited_linker_flags"
## ------------------------------------------------------------------ ##
## ------------------------------------------------------------------ ##
to keep any linker flags which should be used when linking the library,
## ------------------------------------------------------------------ ##
## ------------------------------------------------------ ##
but are outside the usual -L -l, -R etc that can be used in
## ------------------------------------------------------ ##
## ------------------------------------------------------------- ##
dependency_libs. Any unusual flags in dependency_libs cause recent
## ------------------------------------------------------------- ##
## ----------------------------------------------------------- ##
versions of libtool to die with "cannot find the library `'", so
## ----------------------------------------------------------- ##
## --------------------------------------------- ##
it is required to move frameworks out of there. :(
## --------------------------------------------- ##
## ------------------------------------- ##
2004-06-21 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------- ##
From Ralf Wildenhues <address@hidden>:
## ----------------------------------------- ##
## ------------------------------------------------- ##
* libtoolize.in: Quote $# to make sh.test happy again.
## ------------------------------------------------- ##
## ---------------------------------------------------------- ##
* m4/ltdl.m4 (AC_WITH_LTDL): Remove redundant AC_REQUIRE calls.
## ---------------------------------------------------------- ##
## ------------------------------------------------------------ ##
Either set variables to allow a client to link with the installed
## ------------------------------------------------------------ ##
## ------------------------------------------------------------- ##
libltdl, or else compile a local libltdl as a convenience library.
## ------------------------------------------------------------- ##
## ---------------------------------------------- ##
* libtoolize.in (opt_ltdl): Removed in favour of...
## ---------------------------------------------- ##
## ------------------------------------------------------------ ##
(ltdldir): ...this, which is defaulted to "libltdl" or can be set
## ------------------------------------------------------------ ##
## ---------------------------------- ##
by the user with an argument to --ltdl.
## ---------------------------------- ##
## ---------- ##
(Main): Use it!
## ---------- ##
## ------------------------------------------------------------ ##
* doc/libtool.texi (Distributing libltdl): Improved documentation
## ------------------------------------------------------------ ##
## ------ ##
on libltdl.
## ------ ##
## ----------------------------------------------------- ##
(Invoking libtoolize): Document new optional --ltdl target
## ----------------------------------------------------- ##
## -------------- ##
directory argument.
## -------------- ##
## ------------------------------------- ##
2004-06-17 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------ ##
* m4/libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) [darwin*]: Fix a typo
## ------------------------------------------------------------ ##
## ----------------------------------- ##
in allow_undefined_flag: s,${Wl},${wl},g
## ----------------------------------- ##
## ------------------------------------------------------- ##
* libtoolize.in (func_scan_files): Accept AC_WITH_LTDL as an
## ------------------------------------------------------- ##
## --------------------------------- ##
indication that libltdl is being used.
## --------------------------------- ##
## ------------------------------------------------------- ##
(Main): Without AC_CONFIG_MACRO_DIR, don't just dump all the
## ------------------------------------------------------- ##
## --------------------------------------------------------- ##
macro files in `.' since they are never used, and aclocal will
## --------------------------------------------------------- ##
## --------------------------------------------- ##
copy them from $aclocaldir into aclocal.m4 anyway.
## --------------------------------------------- ##
## ----------------------------------------- ##
Reported by Alexandre Duret-Lutz <address@hidden>
## ----------------------------------------- ##
## ------------------------------- ##
2004-06-16 Brad <address@hidden>
## ------------------------------- ##
## ------------------------------------------------- ##
* m4/libtool.m4: More improvements to OpenBSD support.
## ------------------------------------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## ------------------------------------- ##
2004-06-16 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
libltdl uses LIBOBJS, which leak out into a parent project if both
## ------------------------------------------------------------- ##
## ----------------------------------------------------------- ##
share the same configure.ac. Libtool itself doesn't compile any
## ----------------------------------------------------------- ##
## ------------------------------------------------------------ ##
code, so it is okay to do it during bootstrap, but other projects
## ------------------------------------------------------------ ##
## ----------------------------------------------------------- ##
need to treat libltdl as a configurable subproject to keep their
## ----------------------------------------------------------- ##
## ----------------------- ##
respective LIBOBJS separate:
## ----------------------- ##
## --------------------------------------------------- ##
* libltdl/configure.ac: New file, based on configure.ac.
## --------------------------------------------------- ##
## --------------------------------------------------- ##
* libltdl/Makefile.am (AC_LOCAL_AMFLAGS): Use our own m4
## --------------------------------------------------- ##
## ----- ##
directory.
## ----- ##
## ------------------------------------------------------------ ##
(ltdldata_DATA): List *all* the files that libtoolize --ltdl will
## ------------------------------------------------------------ ##
## --- ##
install.
## --- ##
## ------------------------------------- ##
2004-06-16 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## --------------------------------------------------------- ##
Automake 1.9 won't have the AC_PROG_EGREP bug (aclocal used to
## --------------------------------------------------------- ##
## ---------------------------------------------------- ##
pull an old installed libtool.m4 as well as the bootstrap
## ---------------------------------------------------- ##
## ------------------------------------------------- ##
m4/libtool.m4 if an AC_DEFUN was removed), and we have
## ------------------------------------------------- ##
## --------------------------------------------------------- ##
lt~obsolete.m4 to work around it in the mean time. libtoolize
## --------------------------------------------------------- ##
## ------------------------------------------------------------ ##
can install macro files from $prefix/share/aclocal perfectly well
## ------------------------------------------------------------ ##
## ------------------------------------------------- ##
without us needing to move to a whole other directory:
## ------------------------------------------------- ##
## -------------------------------------------------------- ##
* Makefile.am (pkgmacro_DATA): Renamed to aclocal_DATA, so m4
## -------------------------------------------------------- ##
## ---------------------------------------------- ##
files are installed to $prefix/share/aclocal again.
## ---------------------------------------------- ##
## ---------------------------------------------------- ##
(install-data-local): Don't remove just installed macros!
## ---------------------------------------------------- ##
## ------------------------------------------------ ##
* libtoolize.in (pkgmacrodir): Renamed to aclocaldir.
## ------------------------------------------------ ##
## -------------------------------------------------- ##
(func_copy_some_files): New function factored out of...
## -------------------------------------------------- ##
## --------------------------------------------------------------- ##
(func_copy_all_files): ...here. Adjust to use func_copy_some_files.
## --------------------------------------------------------------- ##
## ----------------------------------------------------------- ##
(re_pkgaux_files): Renamed to glob_pkgaux_files, since it is not
## ----------------------------------------------------------- ##
## ---------------- ##
a regular expression.
## ---------------- ##
## -------------------------------- ##
(re_pkgmagro_files): Replaced with...
## -------------------------------- ##
## ----------------------------------------------------------- ##
(pkgmacro_files): ...a colon delimited list of libtool installed
## ----------------------------------------------------------- ##
## -------------------- ##
m4 files from aclocaldir.
## -------------------- ##
## ------------------------------------------ ##
(Main): Copy macro files from aclocaldir again.
## ------------------------------------------ ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## ----------------------------------------------------- ##
2004-05-21 Bob Friesenhahn <address@hidden>
## ----------------------------------------------------- ##
## ----------------------------------------------------------------- ##
* ltmain.sh (check_executable): The WIN32 API and MinGW do not support
## ----------------------------------------------------------------- ##
## ----------------------------------------------------------- ##
S_IXOTH and S_IXGRP so use of these modes should be conditional.
## ----------------------------------------------------------- ##
## ------------------------------------- ##
2004-05-21 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
* tests/tagtrace.test: Forgot to add this file to the repository
## ----------------------------------------------------------- ##
## ---------------------------------- ##
for Alexandre's 2004-05-16 patch below.
## ---------------------------------- ##
## --------------------------------------- ##
2004-05-18 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## ------------------------------------------------------------------ ##
* m4/libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Make this an m4_defun,
## ------------------------------------------------------------------ ##
## ----------------------------------------------------------- ##
test the tags compiler to see if it is GCC, not the CC compiler.
## ----------------------------------------------------------- ##
## ----------------------------------------- ##
2004-05-16 Alexandre Duret-Lutz <address@hidden>
## ----------------------------------------- ##
## ---------------------------------------------------- ##
* doc/libtool.texi (Invoking libtool): Mention --tag=TAG.
## ---------------------------------------------------- ##
## ------------------------------ ##
(Tags, Trace interface): New nodes.
## ------------------------------ ##
## ----------------------------------------- ##
* m4/libtool.m4 (LT_SUPPORTED_TAG): New macro.
## ----------------------------------------- ##
## --------------- ##
(_LT_LANG): Call it.
## --------------- ##
## --------------------------- ##
* tests/tagtrace.test: New file.
## --------------------------- ##
## -------------- ##
* tests/Makefile.am
## -------------- ##
## ---------------------- ##
(TESTS): Add tagtrace.test.
## ---------------------- ##
## ------------------------- ##
* tests/defs: Define AUTOCONF.
## ------------------------- ##
## ------------------------------------- ##
2004-05-14 Mike Gorchak <address@hidden>
## ------------------------------------- ##
## ----------------------------------------- ##
* ltmain.in: Add new qnx version type support.
## ----------------------------------------- ##
## -------------------------------------------------------- ##
* m4/libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Use it. Set
## -------------------------------------------------------- ##
## ---------------- ##
ldqnx.so linker type.
## ---------------- ##
## ---------------------------------------------------- ##
(AC_DEPLIBS_CHECK_METHOD): QNX6 uses GNU C++, with deplib
## ---------------------------------------------------- ##
## --------------------- ##
checking, so use pass_all.
## --------------------- ##
## ----------------------------------------------- ##
(AC_LIBTOOL_PROG_COMPILER_PIC): Use -shared for QNX.
## ----------------------------------------------- ##
## ------------------------------------------------ ##
(_LT_LANG_CXX_CONFIG): QNX can make shared libraries.
## ------------------------------------------------ ##
## ---------------------------------------------------------- ##
* m4/ltdl.m4 (AC_LTDL_SYS_DLOPEN_DEPLIBS): QNX opens deplibs on
## ---------------------------------------------------------- ##
## -- ##
dlopen.
## -- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## --------------------------------------- ##
2004-05-05 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## -------------------------------------------------------------- ##
* m4/libtool.m4 (AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH): Insert space
## -------------------------------------------------------------- ##
## ---------------------------------------------------------- ##
around = for a test and a comma between runpath_var and $1. Bug
## ---------------------------------------------------------- ##
## ------------------- ##
reported by Max Bowsher.
## ------------------- ##
## ------------------------------------- ##
2004-04-22 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------- ##
* libltdl/argz.h: Moved from here...
## ------------------------------- ##
## ---------------------------------------------------- ##
* libltdl/argz_.h: ...to here, so as not to shadow system
## ---------------------------------------------------- ##
## ------------------------------------------ ##
argz.h when we `#include <argz.h>' for example.
## ------------------------------------------ ##
## ------------------------------------------------------ ##
#include stdlib.h and sys/types.h to ensure we get a size_t
## ------------------------------------------------------ ##
## ------ ##
definition.
## ------ ##
## ------------------------------------------------------------- ##
* libltdl/argz.c (HAVE_CONFIG_H): Set it up how ltdl likes it when
## ------------------------------------------------------------- ##
## ------------------ ##
used by another client.
## ------------------ ##
## ------------------ ##
* m4/argz.m4: New file.
## ------------------ ##
## ---------------------------------------------------------- ##
(gl_FUNC_ARGZ): Try to find an error_t definition, and a system
## ---------------------------------------------------------- ##
## -- ##
argz.h.
## -- ##
## ---------------- ##
* m4/ltdl.m4: Use it.
## ---------------- ##
## ------------------------ ##
(AC_LTDL_FUNC_ARGZ): Removed.
## ------------------------ ##
## --------------------------------------------------------- ##
* libltdl/lt__glibc.h: #include <argz.h> to pick up either the
## --------------------------------------------------------- ##
## -------------------------------------------- ##
system argz.h or our libltdl/argz.h if necessary.
## -------------------------------------------- ##
## ------------------------------------------------------- ##
* libltdl/Makefile.am (libltdl_la_SOURCES): Move argz.h from
## ------------------------------------------------------- ##
## -- ##
here...
## -- ##
## --------------------------------------- ##
(ltdldata_DATA): ...here. Along with argz.c.
## --------------------------------------- ##
## --------------------------------------------------------- ##
(argz.h): Generate from argz_.h if the system file is missing.
## --------------------------------------------------------- ##
## ----------------------------------------------- ##
Reported by Ralf Wildenhues <address@hidden>
## ----------------------------------------------- ##
## ------------------------------------- ##
2004-04-22 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------- ##
According to Howard Chu <address@hidden>:
## ----------------------------------------- ##
## --------------------------------------------------- ##
Applications should assume that the native dlopen is NOT
## --------------------------------------------------- ##
## ------------------------------------------------------------ ##
thread-safe, and take care of locking themselves. All application
## ------------------------------------------------------------ ##
## ----------------------------------------------------- ##
calls into libltdl should thus be protected by the caller.
## ----------------------------------------------------- ##
## --------------------------------------------- ##
* libltdl/lt_mutex.c, libltdl/lt_mutex.h: Removed.
## --------------------------------------------- ##
## ---------------------------------------------------------- ##
* libltdl/Makefile.am (pkginclude_HEADERS): Removed lt_mutex.h.
## ---------------------------------------------------------- ##
## --------------------------------------------------- ##
(libltdl_la_SOURCES): Removed lt_mutex.c and lt_mutex.h.
## --------------------------------------------------- ##
## -------------------------------------- ##
* libltdl/ltdl.h: Don't include lt_mutex.h.
## -------------------------------------- ##
## ----------------------------------------------------------- ##
* libltdl/lt__private.h (LT__MUTEX_GETERROR, LT__MUTEX_SETERROR)
## ----------------------------------------------------------- ##
## --------------------------------- ##
(LT__MUTEX_SETERRORSTR): Renamed to...
## --------------------------------- ##
## ----------------------------------------------------------- ##
(LT__GETERROR, LT__SETERROR, LT__SETERRORSTR): ...this. Changed
## ----------------------------------------------------------- ##
## ------- ##
all callers.
## ------- ##
## ---------------------------------------------- ##
(LT__MUTEX_LOCK, LT__MUTEX_UNLOCK, lt_dlmutex_lock)
## ---------------------------------------------- ##
## --------------------------------------------------------- ##
(lt_dlmutex_unlock, lt_dlmutex_seterror, lt_dlmutex_geterror):
## --------------------------------------------------------- ##
## ------------------------- ##
Removed. Changed all callers.
## ------------------------- ##
## ----------------------------------------- ##
* doc/libtool.texi (Thread Saftey in libltdl):
## ----------------------------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## ------------------------------------- ##
2004-04-19 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
* m4/libtool.m4 (_LT_LANG_CXX_CONFIG): Detect Intel C++ compiler
## ----------------------------------------------------------- ##
## ---------------------- ##
version more idiomatically.
## ---------------------- ##
## ----------------------------------------------------- ##
2004-04-19 Albert Chin-A-Young <address@hidden>
## ----------------------------------------------------- ##
## -------------------------------------------- ##
* m4/libtool.m4: Use cc rather than ld to created
## -------------------------------------------- ##
## --------------------------------------------- ##
a shared library on HP-UX 11.x. On HP-UX 10.x, the
## --------------------------------------------- ##
## ----------------------------------------------- ##
C compiler doesn't grok -b so we continue to use ld.
## ----------------------------------------------- ##
## --------------------------------------------- ##
* m4/libtool.m4: Use cc rather than ld to create a
## --------------------------------------------- ##
## ---------------------------------------- ##
shared library on Solaris. When using the Sun
## ---------------------------------------- ##
## -------------------------------------------- ##
Workshop compiler 5.0 (and I presume any previous
## -------------------------------------------- ##
## ----------------------------------------- ##
version), revert to ld due to compiler errors.
## ----------------------------------------- ##
## -------------------------------------------- ##
* m4/libtool.m4: Use cc rather than ld to created
## -------------------------------------------- ##
## -------------------------- ##
a shared library on Tru64 UNIX.
## -------------------------- ##
## -------------------------------------------- ##
* m4/libtool.m4: Use cc rather than ld to created
## -------------------------------------------- ##
## -------------------- ##
a shared library on IRIX.
## -------------------- ##
## ----------------------------------------------- ##
* libltdl/loader-shl_load.c: Fix typos during reorg.
## ----------------------------------------------- ##
## ----------------------------------------- ##
2004-04-19 Alexandre Duret-Lutz <address@hidden>
## ----------------------------------------- ##
## ------------------------------------------------------------- ##
* doc/libtool.texi (LT_INIT): Properly display options in a table.
## ------------------------------------------------------------- ##
## ------------------------------------- ##
2004-04-19 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------ ##
* m4/libtool.m4 (_LT_LANG_CXX_CONFIG): Intel C++ compiler 8.0 and
## ------------------------------------------------------------ ##
## --------------------------------------------------------- ##
newer adds predep_objects and postdep_objects itself, so don't
## --------------------------------------------------------- ##
## ---------------------------------------------------- ##
duplicate them in $archive_cmds and $archive_expsym_cmds.
## ---------------------------------------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## -------------------------------------------- ##
Reported by Roberto Bagnare <address@hidden>
## -------------------------------------------- ##
## --------------------------------------- ##
2004-04-17 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## --------------------------------------------------------------- ##
* libltdl/loader-dyld.c: Fix compilation issues. Set Original author
## --------------------------------------------------------------- ##
## - ##
to me.
## - ##
## ---------------------------------- ##
2004-04-17 Todd Vierling <address@hidden>,
## ---------------------------------- ##
## ---------------------------- ##
Peter O'Gorman <address@hidden>
## ---------------------------- ##
## -------------------------------------------------------------- ##
* m4/libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): Use sysctl to get the
## -------------------------------------------------------------- ##
## -------------------------------------------------------------- ##
max cmd length on BSD* and darwin. Make sure that there is a safety
## -------------------------------------------------------------- ##
## ------ ##
factor too.
## ------ ##
## ----------------------------------------------- ##
2004-04-15 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ------------------------------------------------------------------ ##
* m4/libtool.m4 (_LT_LANG_DEFAULT_CONFIG): Remove code to handle 'none'
## ------------------------------------------------------------------ ##
## ------------------------------------------------------------ ##
and 'all' options, this now always assumes automatic mode as that
## ------------------------------------------------------------ ##
## --------- ##
works so well.
## --------- ##
## -------------------------------- ##
(_LT_LANG_DEFAULT): Remove definition
## -------------------------------- ##
## ------------------------------------------------------------------- ##
* m4/ltoptions.m4: Remove 'no-lang', 'auto-lang' and 'all-lang' options.
## ------------------------------------------------------------------- ##
## -------------------------------------------------------------- ##
* configure.ac: Invoke LT_LANG for each desired supported language.
## -------------------------------------------------------------- ##
## ------------------------------------------------------------ ##
* doc/libtool.texi: Remove documentation for the LT_INIT options,
## ------------------------------------------------------------ ##
## ------------------------- ##
rewrite LT_LANG documentation.
## ------------------------- ##
## ----------------------------------------- ##
2004-04-14 Alexandre Duret-Lutz <address@hidden>
## ----------------------------------------- ##
## ---------------------------- ##
* bootstrap: Delete acinclude.m4.
## ---------------------------- ##
## ------------------------------------- ##
2004-04-14 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
* libtoolize.in (configure_ac): Don't complain about the lack of
## ----------------------------------------------------------- ##
## ------ ##
aclocal.m4.
## ------ ##
## --------------------------------------------- ##
Reported by Alexandre Duret-Lutz <address@hidden>
## --------------------------------------------- ##
## ------------------------------------- ##
2004-04-13 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ---------------------------------------------------------- ##
* m4/ltdl.m4 (AC_LIB_LTDL): Remove AC_REPLACE_FUNCS for memmove
## ---------------------------------------------------------- ##
## ------ ##
and strcpy.
## ------ ##
## ------------------------------------------------------ ##
* libltdl/lt__pre89.h, libltdl/memcpy.c, libltdl/memmove.c,
## ------------------------------------------------------ ##
## -------------------------------------------------------- ##
libltdl/strchr.c, libltdl/strcmp.c, libltdl/strrchr.c: Remove
## -------------------------------------------------------- ##
## ------------------------------- ##
half-assed pre-c89 support entirely.
## ------------------------------- ##
## ----------------------------------------------- ##
* libltdl/lt__private.h: Don't refer to lt__pre89.h.
## ----------------------------------------------- ##
## ------------------------------------------------------ ##
* libltdl/Makefile.am (ltdldata_DATA): Remove references to
## ------------------------------------------------------ ##
## --------- ##
deleted files.
## --------- ##
## -------------- ##
* NEWS: Mention it.
## -------------- ##
## ----------------------------------------------------------------- ##
* libltdl/lt__pre89.h, libltdl/ltdl.c, libltdl/ltdl.h, libltdl/argz.c,
## ----------------------------------------------------------------- ##
## ------------------------------------------------------ ##
libltdl/argz.h, libltdl/lt__glibc.h, libltdl/lt_dlloader.h,
## ------------------------------------------------------ ##
## ------------------------------------------------------------- ##
libltdl/lt__dirent.c, libltdl/lt__dirent.h, libltdl/lt__private.h,
## ------------------------------------------------------------- ##
## --------------------------------------------------------- ##
libltdl/lt__alloc.c, libltdl/lt__alloc.h, libltdl/lt_system.h,
## --------------------------------------------------------- ##
## ---------------------------------------------- ##
libltdl/loader-dld_link.c, libltdl/loader-dlopen.c,
## ---------------------------------------------- ##
## ------------------------------------------------ ##
libltdl/loader-dyld.c, libltdl/loader-loadlibrary.c,
## ------------------------------------------------ ##
## ------------------------------------------------------------- ##
libltdl/loader-shl_load.c, libltdl/lt_error.h, libltdl/lt_mutex.h:
## ------------------------------------------------------------- ##
## --------------------------------------------------------- ##
Autoconf either defines to 1 or undefs the discovery macros it
## --------------------------------------------------------- ##
## ---------------------------------------------------------- ##
puts in config.h, and many (non-GNU) compilers throw a spurious
## ---------------------------------------------------------- ##
## ----------------------------------------------------------- ##
warning when testing an #undef macro with #if. For consistency,
## ----------------------------------------------------------- ##
## ---------------------------------------------------------- ##
while we are touching all these lines, use defined(MACRO) style
## ---------------------------------------------------------- ##
## ------ ##
throughout.
## ------ ##
## ------------------------------------------------------ ##
Reported by Bob Friesenhahn <address@hidden>
## ------------------------------------------------------ ##
## ------------------------------------- ##
2004-04-13 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
Factor out the individual loaders, in preparation for preloading
## ----------------------------------------------------------- ##
## --------------------------------------------------------- ##
them as libtool modules. Currently loader-preopen.c is linked
## --------------------------------------------------------- ##
## ------------------------------------------------------ ##
unconditionally and other appropriate loaders discovered by
## ------------------------------------------------------ ##
## --------------------------------- ##
AC_LTDL_DLLIB are built and linked in:
## --------------------------------- ##
## --------------------------------------------------------- ##
* libltdl/Makefile.am (libltdl_la_SOURCES): Add loader-preopen
## --------------------------------------------------------- ##
## -- ##
module.
## -- ##
## --------------------------------------------------------- ##
* m4/ltdl.m4 (AC_LTDL_DLLIB): Use AC_LIBOBJ to add appropriate
## --------------------------------------------------------- ##
## -------------- ##
loaders to libltdl.
## -------------- ##
## ------------------------------------------- ##
* libltdl/lt_system.h (LT_SCOPE): Moved to here.
## ------------------------------------------- ##
## -------------------------------------------------- ##
* libltdl/ltdl.h (lt_dlloader, lt_user_data, lt_module)
## -------------------------------------------------- ##
## ----------------------------------------------------------- ##
(lt_module_open, lt_module_close, lt_find_sym, lt_dlloader_exit)
## ----------------------------------------------------------- ##
## -------------------------------------------------------- ##
(struct lt_user_dlloader, lt_dlloader_next, lt_dlloader_find)
## -------------------------------------------------------- ##
## ------------------------------------------------ ##
(lt_dlloader_name, lt_dlloader_data, lt_dlloader_add)
## ------------------------------------------------ ##
## -------------------------------------- ##
(lt_dlloader_remove): Moved declarations...
## -------------------------------------- ##
## ----------------------------- ##
* libltdl/lt_loader.h: ...to here.
## ----------------------------- ##
## ------------------------------------------------------------- ##
* libltdl/ltdl.c: Include lt_loader.h. Move loader implementation
## ------------------------------------------------------------- ##
## ------------ ##
code from here...
## ------------ ##
## ------------------------------------------------ ##
* libltdl/loader-dld_link.c, libltdl/loader-dlopen.c,
## ------------------------------------------------ ##
## ----------------------------------------------- ##
libltdl/loader-dyld.c, libltdl/loader-load_add_on.c,
## ----------------------------------------------- ##
## -------------------------------------------------- ##
libltdl/loader-loadlibrary.c, libltdl/loader-preopen.c,
## -------------------------------------------------- ##
## --------------------------------- ##
libltdl/loader-shl_load.c: ...to here.
## --------------------------------- ##
## --------------------------------------------- ##
* tests/cdemo/Makefile.am, tests/demo/Makefile.am,
## --------------------------------------------- ##
## ------------------------------------------------ ##
tests/depdemo/Makefile.am, tests/f77demo/Makefile.am,
## ------------------------------------------------ ##
## --------------------------------------------- ##
tests/mdemo/Makefile.am, tests/mdemo2/Makefile.am,
## --------------------------------------------- ##
## ------------------------------------------------------------ ##
tests/pdemo/Makefile.am, tests/tagdemo/Makefile.am (AM_CPPFLAGS):
## ------------------------------------------------------------ ##
## --------------------------------------------------------- ##
Add -I$(top_srcdir)/../.. so that libltdl include files can be
## --------------------------------------------------------- ##
## ----------------------------------------------------------- ##
written as #include <libltdl/lt_dlloader.h> and found correctly.
## ----------------------------------------------------------- ##
## ------------------------------------- ##
2004-04-13 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ---------------------------------------------------------- ##
Factor out the mutex handling and error handling into their own
## ---------------------------------------------------------- ##
## ---------------------------------------------------------- ##
modules. Mutex handling is not currently useful in combination
## ---------------------------------------------------------- ##
## ------------------------------------------------------------ ##
with posix threads, and should be easier to replace if it is in a
## ------------------------------------------------------------ ##
## ----------------------------------------------------------- ##
separate module. Additionally, we can factor out the loaders in
## ----------------------------------------------------------- ##
## ---------------------------------------------------------- ##
such a way as to depend on only the portability layer and these
## ---------------------------------------------------------- ##
## --------------------------- ##
new mutex and error modules now:
## --------------------------- ##
## ------------------------------------------------------------- ##
* libltdl/Makefile.am (pkginclude_HEADERS): Install lt_error.h and
## ------------------------------------------------------------- ##
## ----------------------------- ##
lt_mutex.h to $includedir/libltdl.
## ----------------------------- ##
## ----------------------------------------------------- ##
(libltdl_la_SOURCES): Build lt_error and lt_mutex objects.
## ----------------------------------------------------- ##
## ------------------------------------------ ##
* libltdl/ltdl.h (LT_SCOPE): Moved from here...
## ------------------------------------------ ##
## ---------------------------------------- ##
* libltdl/lt_system.h (LT_SCOPE): ...to here.
## ---------------------------------------- ##
## ----------------------------------------------------------- ##
* libltdl/ltdl.c (lt_dlerror_strings, LT_DLSTRERROR): Moved from
## ----------------------------------------------------------- ##
## -- ##
here...
## -- ##
## ----------------------------------------------------------- ##
* libltdl/lt__private.h (lt__error_strings, LT__STRERROR): ...to
## ----------------------------------------------------------- ##
## ----------------------------------------------------------- ##
here as additional internal interfaces to lt_error. Changed all
## ----------------------------------------------------------- ##
## --- ##
callers.
## --- ##
## ------------------------------------------------ ##
* libltdl/ltdl.c (LT_DLMUTEX_LOCK, LT_DLMUTEX_UNLOCK)
## ------------------------------------------------ ##
## ----------------------------------------------------------- ##
(LT_DLMUTEX_SETERROR, LT_DLMUTEX_GETERROR, lt_dlmutex_lock_func)
## ----------------------------------------------------------- ##
## --------------------------------------------- ##
(lt_dlmutex_unlock_func, lt_dlmutex_geterror_func)
## --------------------------------------------- ##
## -------------------------------- ##
(lt_dllast_error): Moved from here...
## -------------------------------- ##
## ---------------------------------------------------- ##
(LT__MUTEX_LOCK, LT__MUTEX_UNLOCK, LT__MUTEX_SETERRORSTR)
## ---------------------------------------------------- ##
## ----------------------------------------------------------- ##
(LT__MUTEX_GETERROR, lt__mutex_lock_func, lt__mutex_unlock_func)
## ----------------------------------------------------------- ##
## --------------------------------------------------- ##
(lt__mutex_geterror_func, lt__last_error): ...to here as
## --------------------------------------------------- ##
## ------------------------------------------------------------ ##
additional internal interfaces to lt_mutex. Changed all callers.
## ------------------------------------------------------------ ##
## ------------------------------------------------------- ##
(LT_MUTEX_SETERROR): Take an errorcode rather than a string.
## ------------------------------------------------------- ##
## --------------- ##
Changed all callers.
## --------------- ##
## ------------------------------------------------------------- ##
* libltdl/ltdl.c, libltdl/ltdl.h (lt_dlmutex_register): Moved from
## ------------------------------------------------------------- ##
## -- ##
here...
## -- ##
## ---------------------------------------------------------- ##
* libltdl/lt_mutex.c, libltdl/lt_mutex.h (lt_dlmutex_register):
## ---------------------------------------------------------- ##
## ----------------- ##
...to here. New files.
## ----------------- ##
## ---------------------------------------------------------- ##
* libltdl/ltdl.c, libltdl/ltdl.h (lt_dladderror, lt_dlseterror)
## ---------------------------------------------------------- ##
## -------------- ##
(lt_dlerror_table):
## -------------- ##
## ------------- ##
Moved from here...
## ------------- ##
## --------------------------------------------------- ##
* libltdl/lt_error.c, libltdl/lt_error.h (lt_dladderror)
## --------------------------------------------------- ##
## ---------------------------------------------------- ##
(lt_dlseterror, lt_dlerror_table): ...to here. New files.
## ---------------------------------------------------- ##
## ----------------------------------------------- ##
2004-04-13 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ---------------------------------------------------- ##
* Makefile.am (XDELTA_OPTIONS): Remove --pristine as that
## ---------------------------------------------------- ##
## ------------------ ##
generates huge xdeltas.
## ------------------ ##
## ------------------------------------- ##
2004-04-08 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------- ##
* libltdl/ltdl.c (argz_append, argz_create_sep, argz_insert)
## ------------------------------------------------------- ##
## ----------------------------------------- ##
(argz_next, argz_stringify): Move from here...
## ----------------------------------------- ##
## ---------------------------------- ##
* libltdl/argz.c: New file. ...to here.
## ---------------------------------- ##
## ---------------------------------------------------------- ##
* libltdl/lt__glibc.h: New file. Rename global symbols into the
## ---------------------------------------------------------- ##
## ---------- ##
lt__ namespace.
## ---------- ##
## ---------------------------------------- ##
* libltdl/lt__private.h: Include lt__glibc.h.
## ---------------------------------------- ##
## ----------------------------------------------------- ##
* libltdl/Makefile.am (libltdl_la_SOURCES): Add new files.
## ----------------------------------------------------- ##
## --------------------- ##
(AM_CPPFLAGS): Add -DLTDL.
## --------------------- ##
## ------------------------------------------------------- ##
* libltdl/argz.h (argz_append, argz_create_sep, argz_insert)
## ------------------------------------------------------- ##
## -------------------------------------------------------- ##
(argz_next, argz_stringify): New file. Declare argz functions
## -------------------------------------------------------- ##
## ------------------------------------------------------------ ##
here, including lt__glibc.h when LTDL is defined to rename global
## ------------------------------------------------------------ ##
## --------------- ##
symbols for libltdl.
## --------------- ##
## ------------------------------------------------------------ ##
* m4/ltdl.m4 (AC_LTDL_FUNC_ARGZ): Add argz to AC_LIBOBJ if any of
## ------------------------------------------------------------ ##
## ------------------------------------------------------ ##
our argz_* functions are missing from the system libraries.
## ------------------------------------------------------ ##
## ---------------------------------------------------------- ##
* libltdl/ltdl.c: Move standard headers and preprocessor guards
## ---------------------------------------------------------- ##
## ------- ##
from here...
## ------- ##
## ----------------------------------------------------------- ##
* libltdl/lt__private.h: ...to here. New file to declare ltdl's
## ----------------------------------------------------------- ##
## --------------- ##
internal interfaces.
## --------------- ##
## ----------------------------------- ##
* libltdl/ltdl.c: Include lt__private.h.
## ----------------------------------- ##
## ----------------------------------------------------------- ##
* m4/ltdl.m4 (AC_LIB_LTDL): Add lt_dirent to AC_LIBOBJ if all of
## ----------------------------------------------------------- ##
## ------------------------------------- ##
opendir, readdir and closedir are missing.
## ------------------------------------- ##
## ----------------------------------------------------------- ##
(AC_CHECK_HEADERS): Remove assert.h, ctype.h, errno.h, malloc.h,
## ----------------------------------------------------------- ##
## ------------------------------------------------------------ ##
stdio.h and stdlib.h; these headers are all available in standard
## ------------------------------------------------------------ ##
## ---------------------- ##
c89 environments and newer.
## ---------------------- ##
## ------------------------------------------------------ ##
* libltdl/lt__private.h: Include them here unconditionally.
## ------------------------------------------------------ ##
## --------------------------------------------------------- ##
* libltdl/lt__dirent.c (opendir, readdir, closedir): New file.
## --------------------------------------------------------- ##
## ---------------------------------------------- ##
Windows dirent emulation functions moved to here...
## ---------------------------------------------- ##
## ------------------------------------------------------- ##
* libltdl/ltdl.c (opendir, readdir, closedir): ...from here.
## ------------------------------------------------------- ##
## ------------------------------------------------------------ ##
* libltdl/lt__dirent.h: New file. Rename the global symbols from
## ------------------------------------------------------------ ##
## -------------------------------------------------------- ##
lt__dirent.c into the lt__ namespace so they don't clash with
## -------------------------------------------------------- ##
## ----------- ##
other libraries.
## ----------- ##
## ------------------------------------- ##
2004-04-08 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
Factor out the bottom portability layer from ltdl. Code in this
## ----------------------------------------------------------- ##
## ------------------------------------------------------- ##
layer has global symbols renamed by lt__pre89.h, and may not
## ------------------------------------------------------- ##
## ------------------------------------------------------------- ##
refer to any symbols except those provided by the system libraries
## ------------------------------------------------------------- ##
## ---------------------------------- ##
or other code in the portability layer:
## ---------------------------------- ##
## -------------------------------------------------------- ##
* libltdl/lt__pre89.h: New file. Rename all the symbols from
## -------------------------------------------------------- ##
## ---------------------------------------------------------- ##
LTLIBOBJS into the lt__ namespace so that they don't clash with
## ---------------------------------------------------------- ##
## ----------- ##
other libraries.
## ----------- ##
## ------------------------------------------------------------- ##
* libltdl/ltdl.c (rpl_memcpy, rpl_memmove, rpl_strchr, rpl_strcmp)
## ------------------------------------------------------------- ##
## ---------------------------- ##
(rpl_strrchr): Moved from here...
## ---------------------------- ##
## ---------------------------------------------------- ##
* libltdl/memcpy.c (memcpy): ...to here, and fixed void *
## ---------------------------------------------------- ##
## ------------- ##
dereference bug...
## ------------- ##
## ------------------------------------------------------ ##
* libltdl/memmove.c (memmove): ...to here, and fixed void *
## ------------------------------------------------------ ##
## ------------- ##
dereference bug...
## ------------- ##
## ------------------------------------- ##
* libltdl/strchr.c (strchr): ...to here...
## ------------------------------------- ##
## ---------------------------------- ##
* libltdl/strcmp.c (strcmp): ...here...
## ---------------------------------- ##
## -------------------------------------- ##
* libltdl/strrchr.c (strrchr): ...and here.
## -------------------------------------- ##
## ------------------------------------------------------- ##
* libltdl/Makefile.am (libltdl_la_SOURCES): Add lt__pre89.h.
## ------------------------------------------------------- ##
## ----------------------------------------------------- ##
(libltdl_la_LIBADD, libltdlc_la_LIBADD): Add $(LTLIBOBJS).
## ----------------------------------------------------- ##
## ------------------------------------------ ##
(ltdldata_DATA): Add replacement sources files.
## ------------------------------------------ ##
## ------------------------------------------------------- ##
* m4/ltdl.m4 (AC_LIB_LTDL): Do careful config.h and LTLIBOBJ
## ------------------------------------------------------- ##
## ------------------------------- ##
setting for missing pre89 functions.
## ------------------------------- ##
## ------------------------------------- ##
2004-04-08 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------- ##
* libltdl/ltdl.h (LT_PARAMS): Removed. Changed all users to
## ------------------------------------------------------- ##
## ----------- ##
ANSI prototypes.
## ----------- ##
## --------------------------------------- ##
(lt_ptr): Keep backwards compatibility stub.
## --------------------------------------- ##
## ----------------------------------------------------------- ##
* libtldl/ltdl.c, libltdl/ltdl.h: Use ANSI function declarations
## ----------------------------------------------------------- ##
## -------------------------- ##
throughout. s/lt_ptr/void */g.
## -------------------------- ##
## ------------------------------------------- ##
2004-04-08 Fredrik Estreen <address@hidden>
## ------------------------------------------- ##
## ----------------------------------------------- ##
* m4/ltdl.m4: Rename shrext to shrext_cmds here too.
## ----------------------------------------------- ##
## ------------------------------------- ##
2004-04-06 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ---------------------------------------------------------- ##
There was no clean separation of abstraction layers in libltdl.
## ---------------------------------------------------------- ##
## ---------------------------------------------------- ##
The first step in fixing this is to factor out the memory
## ---------------------------------------------------- ##
## --------------------------------------------------------- ##
management abstraction, making a start on removing promiscuity
## --------------------------------------------------------- ##
## --------------------------------- ##
from the underlying portability layer:
## --------------------------------- ##
## ------------------------------------------------------ ##
* doc/libtool.texi (Libltdl interface): Remove lt_dlmalloc,
## ------------------------------------------------------ ##
## -------------------------------------------------------- ##
lt_dlrealloc and lt_dlfree references. The memory management
## -------------------------------------------------------- ##
## -------------------------------- ##
layer used by libltdl is now private.
## -------------------------------- ##
## ------------------------------------------------------------- ##
* libltdl/lt_system.h: New installed header for system portability
## ------------------------------------------------------------- ##
## ------- ##
abstraction.
## ------- ##
## -------------------- ##
* libltdl/ltdl.h: Use it.
## -------------------- ##
## ------------------------------------------------------- ##
* libltdl/lt__alloc.c, libltdl/lt__alloc.h: New module above
## ------------------------------------------------------- ##
## --------------------------------------------------------- ##
system portability layer to abstract ltdl's memory management.
## --------------------------------------------------------- ##
## ----------------------------- ##
* libltdl/ltdl.c: Use lt__alloc.h.
## ----------------------------- ##
## ---------------- ##
(closedir): Use free.
## ---------------- ##
## ---------------------- ##
(opendir): Use malloc/free.
## ---------------------- ##
## ---------------------------------------------------- ##
(lt__xalloc_die_callback): Report memory failures through
## ---------------------------------------------------- ##
## ------ ##
lt_dlerror.
## ------ ##
## ----------------------------------------------- ##
(lt_dlinit): Use it to initialise memory management.
## ----------------------------------------------- ##
## ---------------------------------------------------------- ##
(LT_DLMALLOC, LT_DLREALLOC, LT_DLFREE, LT_EMALLOC, LT_EREALLOC)
## ---------------------------------------------------------- ##
## ---------------------------------------------------------- ##
(rpl_strdup, rpl_realloc, lt_estrdup, lt_emalloc, lt_erealloc):
## ---------------------------------------------------------- ##
## ------------------ ##
Removed in favour of...
## ------------------ ##
## ---------------------------------------------------------- ##
(lt__strdup, lt__memdup, MALLOC, REALLOC, FREE): ...these calls
## ---------------------------------------------------------- ##
## ------------------------------------------ ##
from libltdl/lt__alloc.h. Changed all callers.
## ------------------------------------------ ##
## ----------------------------------------------------------- ##
(rpl_argz_append, rpl_argz_create_sep, rpl_argz_insert): As part
## ----------------------------------------------------------- ##
## ---------------------------------------------------------- ##
of the portability layer, these functions no longer use libltdl
## ---------------------------------------------------------- ##
## ----------------- ##
memory management API.
## ----------------- ##
## --------------------- ##
(free_vars): Factored out.
## --------------------- ##
## --------------------------------------------------------- ##
(LT_DLMEM_REASSIGN): While redoing memory handling, renamed...
## --------------------------------------------------------- ##
## ------------------------------------------- ##
* libltdl/lt__alloc.h (MEMREASSIGN): ...to this.
## ------------------------------------------- ##
## ------------------------------------------------------- ##
* libltdl/Makefile.am (AUTOMAKE_OPTIONS): Let automake track
## ------------------------------------------------------- ##
## ---------------------- ##
dependencies automatically.
## ---------------------- ##
## --------------------------------------------------- ##
(pkgincludedir): Override from parent package's setting.
## --------------------------------------------------- ##
## ------------------------------------- ##
(pkginclude_HEADERS): Install lt_system.h.
## ------------------------------------- ##
## ------------------------------- ##
(libltdl_la_SOURCES): Add new files.
## ------------------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## ---------------------------------------- ##
Reported by Dalibor Topic <address@hidden>
## ---------------------------------------- ##
## --------------------------------------- ##
2004-04-01 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## --------------------------------------------------------------- ##
* ltmain.in: Remove an extra eval concat_cmds that some idiot added.
## --------------------------------------------------------------- ##
## ------------------------------------------------------------- ##
Fixes double eval on AIX, reported by Albert Chin and Uwe Moeller.
## ------------------------------------------------------------- ##
## ------------------------------------------------------------- ##
* NEWS: Add a news item about xlc support that I forgot yesterday.
## ------------------------------------------------------------- ##
## --------------------------------------- ##
2004-03-31 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## ------------------------------------------------------------ ##
* m4/libtool.m4, ltmain.in (darwin): Support IBM's xlc and xlc++.
## ------------------------------------------------------------ ##
## ------------------------------------- ##
2004-03-31 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
* m4/libtool.m4 (_LT_LANG_C_CONFIG): If $compiler is not set, then
## ------------------------------------------------------------- ##
## ------------------------------ ##
don't call the macros that test it.
## ------------------------------ ##
## ------------------------ ##
(_LT_LANG_CXX_CONFIG): Ditto.
## ------------------------ ##
## ------------------------ ##
(_LT_LANG_F77_CONFIG): Ditto.
## ------------------------ ##
## ------------------------ ##
(_LT_LANG_GCJ_CONFIG): Ditto.
## ------------------------ ##
## ----------------------- ##
(_LT_LANG_RC_CONFIG): Ditto.
## ----------------------- ##
## ------------------------------------- ##
2004-03-30 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
* libtoolize.in (func_scan_files): sed BRE have no alternation, so
## ------------------------------------------------------------- ##
## --------------------- ##
break LT_INIT matcher out.
## --------------------- ##
## --------------------------------------------------- ##
(func_serial): Don't escape literal parens for grep BRE.
## --------------------------------------------------- ##
## ------------------------------------------------------------- ##
* m4/libtool.m4 (LT_INIT): aclocal can't see AC_DEFUN_ONCE, so use
## ------------------------------------------------------------- ##
## ------------------ ##
AC_DEFUN and m4_define.
## ------------------ ##
## ----------------------------------------------------------- ##
* libtoolize.in (func_serial): No longer accept AC_DEFUN_ONCE...
## ----------------------------------------------------------- ##
## ---------------------------------------------- ##
(func_grep): ...so mere grep is sufficient again...
## ---------------------------------------------- ##
## -------------------------------------- ##
(EGREP): ...and this is no longer required.
## -------------------------------------- ##
## ------------------------------------- ##
2004-03-29 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## --------------------------------------- ##
* m4/libtool.m4: Use LT_INIT as #serial tag.
## --------------------------------------- ##
## -------------------------------------------------------- ##
* libtoolize.in: Grok LT_INIT! Pass A[CM]_PROG_LIBTOOL to...
## -------------------------------------------------------- ##
## ------------------------------------------------------------- ##
(func_serial_update): ...here, we now take an additional parameter
## ------------------------------------------------------------- ##
## ---------------------------------------------------- ##
containing another regex to match ancient serialed files.
## ---------------------------------------------------- ##
## ---------------------------------------------------- ##
(func_serial): Accept AC_DEFUN_ONCE of the #serial tag...
## ---------------------------------------------------- ##
## ---------------------------------- ##
(func_grep): ...which requires egrep...
## ---------------------------------- ##
## ------------------------------------ ##
(EGREP): ...substituted by config.status.
## ------------------------------------ ##
## -------------------------------------------------- ##
(func_scan_files): Set seen_libtool if LT_INIT goes by.
## -------------------------------------------------- ##
## ----------------------------------------------- ##
* Makefile.am (pkgmacro_DATA): Install ltoptions.m4.
## ----------------------------------------------- ##
## ------------------------------------------------------------ ##
* libltdl/Makefile.am (AM_CPPFLAGS): Also check $top_builddir for
## ------------------------------------------------------------ ##
## ---- ##
config.h.
## ---- ##
## ---------------------------------- ##
(ltdl.o): config.h is in $top_builddir.
## ---------------------------------- ##
## ----------------------------------------------- ##
2004-03-24 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ----------------------------------------------------- ##
* NEWS: Explain more fully why we no longer load libraries
## ----------------------------------------------------- ##
## ------------------------- ##
with global symbol resolution.
## ------------------------- ##
## ---------------------------------------------------- ##
* doc/libtool.texi (libtool script contents): Add missing
## ---------------------------------------------------- ##
## -------------------------------------- ##
documentation for 'inherit_rpath' variable.
## -------------------------------------- ##
## ---------------------------------------------------- ##
* configure.ac: Catch errors during calls to AC_PROG_CXX,
## ---------------------------------------------------- ##
## ------------------------------------------------------- ##
AC_PROG_CXXCPP and AC_PROG_F77 before LT_INIT. Only set the
## ------------------------------------------------------- ##
## ------------------------------------------------------ ##
HAVE_CXX and HAVE_F77 conditions to true if an error didn't
## ------------------------------------------------------ ##
## ----------------------------------------------------------- ##
occur (AC_PROG_CXX leaves CXX="g++" even if it didn't find one).
## ----------------------------------------------------------- ##
## ---------------------------------------------- ##
Set HAVE_GCJ and HAVE_RC to true correctly as well.
## ---------------------------------------------- ##
## ----------------------------------------------------------- ##
* m4/libtool.m4 (LT_PROG_GCJ): If AC_PROG_GCJ or AM_PROG_GCJ are
## ----------------------------------------------------------- ##
## --------------------------------------------------------- ##
defined, expand to the definition of those instead of our own.
## --------------------------------------------------------- ##
## ----------------------------------------- ##
Define GCJ to '' instead of 'no' if not found.
## ----------------------------------------- ##
## ----------------------------------------------------- ##
(LT_PROG_RC) Define RC to '' instead of 'no' if not found.
## ----------------------------------------------------- ##
## ----------------------------------------------------------- ##
(_LT_LANG_GCJ_CONFIG): Require LT_PROG_GCJ to be expanded first.
## ----------------------------------------------------------- ##
## --------------------------------------------------------- ##
(_LT_LANG_RC_CONFIG): Require LT_PROG_RC to be expanded first.
## --------------------------------------------------------- ##
## ----------------------------------------------------------- ##
* libltdl/ltdl.c (sys_dl_open): Don't load libraries with global
## ----------------------------------------------------------- ##
## ------------- ##
symbol resolution.
## ------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## ----------------------------------------------------- ##
2004-03-24 Albert Chin-A-Young <address@hidden>
## ----------------------------------------------------- ##
## --------------------------------------------------- ##
* m4/libtool.m4: Add new variable, inherit_rpath, if the
## --------------------------------------------------- ##
## ------------------------------------------------ ##
RPATHs of the libraries being linked are inherited in
## ------------------------------------------------ ##
## ------------------------------------------------ ##
the output file. For systems with a linker exhibiting
## ------------------------------------------------ ##
## ----------------------------------------------- ##
this feature, programs/libraries must be relinked at
## ----------------------------------------------- ##
## ------------- ##
installation time.
## ------------- ##
## --------------------------------------------------------- ##
* m4/libtool.m4: When linking convenience libraries on Solaris
## --------------------------------------------------------- ##
## -------------------------------------------------------- ##
with the Sun C++ compiler, pass convenience libraries through
## -------------------------------------------------------- ##
## --------------------------------------------------------- ##
to the linker with -Qoption between allextract/defaultextract.
## --------------------------------------------------------- ##
## --------------------------------------------- ##
The Sun C++ compiler bundles -Qoption arguments so
## --------------------------------------------- ##
## ----------------------------------------------- ##
convenience libraries are linked with defaultextract
## ----------------------------------------------- ##
## ----- ##
otherwise.
## ----- ##
## --------------------------------------------------- ##
* tagdemo/Makefile.am, tagdemo/main.cpp, tagdemo/conv.h,
## --------------------------------------------------- ##
## ------------------------------------------------------- ##
tagdemo/conv.cpp: Augment tagdemo test to link a convenience
## ------------------------------------------------------- ##
## -------------------------- ##
library with a libtool library.
## -------------------------- ##
## ------------------------------------------------------ ##
* ltmain.in: Piecewise linking doesn't work when the output
## ------------------------------------------------------ ##
## --------------------------------------------------- ##
file is an absolute path, use the basename only instead.
## --------------------------------------------------- ##
## --------------------------------------------------- ##
* ltmain.in: When a library is installed, dependent on a
## --------------------------------------------------- ##
## ----------------------------------------------------- ##
convenience library, and it involves relinking, the object
## ----------------------------------------------------- ##
## ------------------------------------------------------- ##
files extracted from the convenience library are not removed
## ------------------------------------------------------- ##
## -------------------------------------------------------- ##
after the relink. This is a problem if you build as non-root,
## -------------------------------------------------------- ##
## ----------------------------------------------------- ##
install as root, then try to remove the build directory as
## ----------------------------------------------------- ##
## ---------------------------------------------- ##
non-root; Clean up properly if relink fails; Change
## ---------------------------------------------- ##
## ----------------------------------------- ##
"$realname"U to ${realname}T to be consistent.
## ----------------------------------------- ##
## ----------------------------------------------- ##
2004-03-24 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ------------------------------------------------ ##
* ltmain.in <prog linkmode>: Always add -L options to
## ------------------------------------------------ ##
## ---------------------------------------------------------- ##
$newlib_search_path instead of just in scan mode to ensure that
## ---------------------------------------------------------- ##
## ------------------------------------------------------------ ##
non-libtool libraries in user-specified directories can be found.
## ------------------------------------------------------------ ##
## ----------------------------------------------- ##
2004-03-22 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ------------------------------------------------------- ##
* m4/libtool.m4 (_LT_CONFIG): Remove unneeded else condition
## ------------------------------------------------------- ##
## --------------------------------------------- ##
code, now the support determination is done in m4.
## --------------------------------------------- ##
## ----------------------------------------------------------------- ##
(_LT_LANG): Correct comment, unexpected leak from keybuk-lt-tag.patch.
## ----------------------------------------------------------------- ##
## ----------------------------------------------- ##
2004-03-21 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## -------------------------------------------------------- ##
* libltdl/Makefile.am (libltdl_la_LDFLAGS): Increment CURRENT
## -------------------------------------------------------- ##
## -------------------------------------------------------------- ##
and AGE of libltdl, warranted by the addition of lt_dlhandle_find()
## -------------------------------------------------------------- ##
## ------- ##
since 1.5.2.
## ------- ##
## ----------------------------------------------- ##
2004-03-21 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## --------------------------------------------------------- ##
Further sweeping changes to the user interface to libtool from
## --------------------------------------------------------- ##
## ------------------------------------------------------ ##
`configure.ac' to allow users to better control the list of
## ------------------------------------------------------ ##
## ------------------------------------------------------------ ##
supported languages. Three LT_INIT options 'no-lang', 'all-lang'
## ------------------------------------------------------------ ##
## ------------------------------------------------------------ ##
and 'auto-lang' (the default) control the initial list and others
## ------------------------------------------------------------ ##
## --------------------- ##
may be added with LT_LANG.
## --------------------- ##
## ---------------------------------------------------------------- ##
* m4/libtool.m4 (_LT_CONFIG): Renamed AC_LIBTOOL_CONFIG to _LT_CONFIG
## ---------------------------------------------------------------- ##
## ------------------------------------------------------------------ ##
which is more consistent with our own namespace and gets us further out
## ------------------------------------------------------------------ ##
## --------- ##
of Autoconf's.
## --------- ##
## ------------------------------------------------------------ ##
(_LT_LIBTOOL_TAGS): Output available_tags variable based entirely
## ------------------------------------------------------------ ##
## -------------------- ##
on the value of _LT_TAGS.
## -------------------- ##
## --------------------------------------------------------- ##
(_LT_COPYING): Call _LT_LIBTOOL_TAGS to output available tags,
## --------------------------------------------------------- ##
## --------------------------------------------------- ##
always append tag configuration if the tag is available.
## --------------------------------------------------- ##
## ------------------------------------------------------------- ##
(LT_LANG): New macro to enable support for a language that accepts
## ------------------------------------------------------------- ##
## ----------------------------------------------------- ##
tag names (eg. "CXX") or human language names (eg. "C++").
## ----------------------------------------------------- ##
## -------------------------------------------------------- ##
(_LT_LANG): Internal support macro for above that appends the
## -------------------------------------------------------- ##
## -------------------------------------------------- ##
tag to _LT_TAGS and calls the appropriate config macro.
## -------------------------------------------------- ##
## ------------------------------------------------------- ##
(LT_INIT): Ensure that LT_LANG is not called before LT_INIT.
## ------------------------------------------------------- ##
## ---------------------------------------------------------- ##
(AC_LIBTOOL_TAGS): Removed, call LT_LANG for each language now.
## ---------------------------------------------------------- ##
## --------------------------------------------------------- ##
(_LT_AC_TAG_CHECK): Removed, _LT_LANG handles duplicate calls.
## --------------------------------------------------------- ##
## ----------------------------------------------------------- ##
(_LT_LANG_DEFAULT_CONFIG): Macro to set initial language support
## ----------------------------------------------------------- ##
## ------------------------------ ##
based on options passed to LT_INIT.
## ------------------------------ ##
## ------------------------------------- ##
(_LT_SETUP): Call _LT_LANG_DEFAULT_CONFIG.
## ------------------------------------- ##
## ------------------------------------------------------------ ##
(_LT_AC_TAG_CONFIG): Removed, handled by _LT_LANG_DEFAULT_CONFIG.
## ------------------------------------------------------------ ##
## -------------------------------------------------------- ##
(_LT_AC_LANG_CXX, _LT_AC_LANG_F77, _LT_AC_LANG_GCJ): Removed,
## -------------------------------------------------------- ##
## ---------------------------------------------- ##
automatic language support inclusion now handled by
## ---------------------------------------------- ##
## ------------------- ##
_LT_LANG_DEFAULT_CONFIG.
## ------------------- ##
## ---------------------------------------------------- ##
(AC_LIBTOOL_CXX): Obsolete macro, update to LT_LANG(C++).
## ---------------------------------------------------- ##
## ----------------------------------------------------------- ##
(AC_LIBTOOL_F77): Obsolete macro, update to LT_LANG(Fortran 77).
## ----------------------------------------------------------- ##
## ----------------------------------------------------- ##
(AC_LIBTOOL_GCJ): Obsolete macro, update to LT_LANG(Java).
## ----------------------------------------------------- ##
## ------------------------------- ##
(AC_LIBTOOL_LANG_C_CONFIG_: Removed.
## ------------------------------- ##
## ----------------------------------------------------- ##
(_LT_AC_LANG_C_CONFIG): Renamed to _LT_LANG_C_CONFIG, call
## ----------------------------------------------------- ##
## ----------------------------------- ##
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
## ----------------------------------- ##
## ------------------------------------------------------------- ##
(_LT_SETUP): Replace call to AC_LIBTOOL_LANG_C_CONFIG with call to
## ------------------------------------------------------------- ##
## ----------------------- ##
new _LT_LANG_C_CONFIG macro.
## ----------------------- ##
## --------------------------------- ##
(AC_LIBTOOL_LANG_CXX_CONFIG): Removed.
## --------------------------------- ##
## --------------------------------------------------------- ##
(_LT_AC_LANG_CXX_CONFIG): Renamed to _LT_LANG_CXX_CONFIG, call
## --------------------------------------------------------- ##
## ----------------------------------- ##
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
## ----------------------------------- ##
## --------------------------------- ##
(AC_LIBTOOL_LANG_F77_CONFIG): Removed.
## --------------------------------- ##
## --------------------------------------------------------- ##
(_LT_AC_LANG_F77_CONFIG): Renamed to _LT_LANG_F77_CONFIG, call
## --------------------------------------------------------- ##
## ----------------------------------- ##
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
## ----------------------------------- ##
## --------------------------------- ##
(AC_LIBTOOL_LANG_GCJ_CONFIG): Removed.
## --------------------------------- ##
## --------------------------------------------------------- ##
(_LT_AC_LANG_GCJ_CONFIG): Renamed to _LT_LANG_GCJ_CONFIG, call
## --------------------------------------------------------- ##
## ----------------------------------- ##
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
## ----------------------------------- ##
## -------------------------------- ##
(AC_LIBTOOL_LANG_RC_CONFIG): Removed.
## -------------------------------- ##
## ------------------------------------------------------- ##
(_LT_AC_LANG_RC_CONFIG): Renamed to _LT_LANG_RC_CONFIG, call
## ------------------------------------------------------- ##
## ----------------------------------- ##
_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
## ----------------------------------- ##
## ------------------------------------ ##
(LT_AC_PROG_GCJ): Renamed to LT_PROG_GCJ.
## ------------------------------------ ##
## ---------------------------------- ##
(LT_AC_PROG_RC): Renamed to LT_PROG_RC.
## ---------------------------------- ##
## -------------------------------------------------------------- ##
* m4/ltoptions.m4: Define new 'no-lang', 'auto-lang' and 'all-lang'
## -------------------------------------------------------------- ##
## ----------------------------------------------------- ##
options which set the default for _LT_LANG_DEFAULT_CONFIG.
## ----------------------------------------------------- ##
## ---------------------------------------------------------------- ##
* m4/lt~obsolete.m4: Removed AC_LIBTOOL_CONFIG, _LT_AC_LANG_C_CONFIG,
## ---------------------------------------------------------------- ##
## ------------------------------------------------------------- ##
_LT_AC_LANG_GCJ_CONFIG, _LT_AC_LANG_RC_CONFIG; all of which are no
## ------------------------------------------------------------- ##
## ---------------------- ##
long referenced in any way.
## ---------------------- ##
## -------------------------------- ##
* configure.ac: Enable all languages.
## -------------------------------- ##
## ----------------------------------------------- ##
* tests/cdemo/configure.ac, tests/demo/configure,ac,
## ----------------------------------------------- ##
## -------------------------------------------------- ##
tests/depdemo/configure.ac, tests/f77demo/configure.ac,
## -------------------------------------------------- ##
## ---------------------------------------------- ##
tests/mdemo/configure.ac, tests/pdemo/configure,ac,
## ---------------------------------------------- ##
## ------------------------------------------------------- ##
tests/tagdemo/configure.ac: Remove calls to AC_LIBTOOL_TAGS,
## ------------------------------------------------------- ##
## ------------------------------------------------- ##
the default 'auto-lang' mode now does the right thing.
## ------------------------------------------------- ##
## -------------------------------------------------------- ##
* doc/libtool.texi (The LT_INIT macro): Add documentation for
## -------------------------------------------------------- ##
## ------------------------------------------------------- ##
new LT_INIT options and the LT_LANG macro, replacing the old
## ------------------------------------------------------- ##
## --------------------------------------------- ##
documentation of AC_LIBTOOL_TAGS which is no more.
## --------------------------------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## ----------------------------------------------- ##
2004-03-17 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ------------------------------------------------------------ ##
* m4/libtool.m4: Removed AC_BEFORE references to AC_LIBTOOL_SETUP
## ------------------------------------------------------------ ##
## ------------ ##
which is no more.
## ------------ ##
## ------------------------------------------------------------ ##
* m4/lt~obsolete.m4: As AC_LIBTOOL_SETUP is no longer referenced,
## ------------------------------------------------------------ ##
## ----------------------------------------------------------- ##
it can be removed from this file. Remove _AC_PROG_LIBTOOL also.
## ----------------------------------------------------------- ##
## ----------------------------------------------- ##
2004-03-14 Ralf Wildenhues <address@hidden>
## ----------------------------------------------- ##
## ------------------------------------------------ ##
* m4/libtool.m4: Remove newlines from lt_ld_extra, so
## ------------------------------------------------ ##
## ----------------------------------------- ##
variable can safely be stored in config.cache.
## ----------------------------------------- ##
## --------------------------------------- ##
2004-03-14 Michael Pruett <address@hidden>
## --------------------------------------- ##
## ----------------------------------------------------- ##
* m4/libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS0 [irix]: Define
## ----------------------------------------------------- ##
## -------------------------------------------------- ##
archive_expsym_cmds so that --export-symbols will work.
## -------------------------------------------------- ##
## --------------------------------------- ##
2004-03-11 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## ------------------------------------------------------- ##
* ltmain.in (link_all_deplibs,darwin): Link libraries in the
## ------------------------------------------------------- ##
## --------------------------------------------------------- ##
correct order. Bug from Zachary Pincus <address@hidden>.
## --------------------------------------------------------- ##
## ----------------------------------------------- ##
2004-03-14 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## -------------------------------------------------------------- ##
* m4/ltmain.in: Only check precious_files_regex if it is not empty.
## -------------------------------------------------------------- ##
## ------------------------------------- ##
2004-03-14 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
* doc/libtool.texi (Autoconf and LTLIBOBJS): The correct version
## ----------------------------------------------------------- ##
## --------------- ##
of Autoconf is 2.54.
## --------------- ##
## --------------------------------------- ##
From Alexandre Duret-Lutz <address@hidden>
## --------------------------------------- ##
## ------------------------------------- ##
2004-03-13 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
* doc/libtool.texi (Using Automake): Cite correct Automake version
## ------------------------------------------------------------- ##
## --------------- ##
for -dlopen quoting.
## --------------- ##
## --------------------------------------------------- ##
(Autoconf and LTLIBOBJS): Cite correct Autoconf versions
## --------------------------------------------------- ##
## ------ ##
throughout.
## ------ ##
## ----------------------------------------------------------- ##
(Distributing libltdl): Use AM_CPPFLAGS; INCLUDES is deprecated.
## ----------------------------------------------------------- ##
## --------------------------------------- ##
From Alexandre Duret-Lutz <address@hidden>
## --------------------------------------- ##
## ---------------------------------------- ##
2004-03-05 David Edelsohn <address@hidden>
## ---------------------------------------- ##
## --------------------------------------------------------- ##
* m4/libtool.m4: Disable building static libraries if building
## --------------------------------------------------------- ##
## ---------------------- ##
shared libraries on AIX 5L.
## ---------------------- ##
## ------------------------------------- ##
2004-03-05 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## -------------------------------------------------------- ##
* libtoolize.in: Remove --ltdl-tar. It doesn't work with the
## -------------------------------------------------------- ##
## ---------------------------------------------------- ##
current implementation, and seems more or less pointless.
## ---------------------------------------------------- ##
## --------------------------------------------- ##
* doc/libtool.texi (Invoking libtoolize): Updated.
## --------------------------------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## ----------------------------------------------------------- ##
* doc/libtool.texi: This manual has not been maintained properly
## ----------------------------------------------------------- ##
## -------------------------------------------------------- ##
for a number of years. Much of what it said was outdated, or
## -------------------------------------------------------- ##
## ------------------------------------------------------- ##
plain wrong with reference to modern autotools. This change
## ------------------------------------------------------- ##
## -------------------------------------------------------- ##
represents a first pass edit to clean up the obviously wrong.
## -------------------------------------------------------- ##
## ------------------------------------- ##
2004-03-02 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## --------------------------------------------------- ##
* bootstrap: Prune out my arch mirror dir before running
## --------------------------------------------------- ##
## ------------------------------- ##
amok through the tree with 'rm -rf'!
## ------------------------------- ##
## -------------------------------------------- ##
2004-03-02 Patrick Welche <address@hidden>
## -------------------------------------------- ##
## ------------------------------------------ ##
* doc/libtool.texi (LT_INIT): Dumb typos fixed.
## ------------------------------------------ ##
## ------------------------------------- ##
2004-02-23 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------- ##
* ltmain.in <install mode>: Add missing --help doc for
## ------------------------------------------------- ##
## --------------- ##
-inst-prefix option.
## --------------- ##
## ------------------------------------------------------ ##
* ltmain.in <link mode>: Add missing --help doc for -shrext
## ------------------------------------------------------ ##
## -- ##
option.
## -- ##
## --------------------------------------------------------- ##
* ltmain.in (IFS): Move '\n' to beginning of IFS so that emacs
## --------------------------------------------------------- ##
## ----------------------------------------------- ##
doesn't offer to strip trailing ' \t' on every save.
## ----------------------------------------------- ##
## ------------------------------------------------------- ##
* ltmain.in: Add missing --help doc for --preserve-dup-deps.
## ------------------------------------------------------- ##
## ------------------------------------- ##
2004-02-22 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
* Makefile.maint (web-manual): Generate the web manual carefully
## ----------------------------------------------------------- ##
## -------------------------------------------------------- ##
so that links will still work when it is uploaded to gnu.org.
## -------------------------------------------------------- ##
## -------------------------------------------------------- ##
* README-alpha: Note that this rule should be used at release
## -------------------------------------------------------- ##
## ##
time.
## ##
## ------------------------------------- ##
2004-02-20 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------- ##
Sweeping changes to the user interface to libtool from
## ------------------------------------------------- ##
## ---------------------------------------------------- ##
`configure.ac' to be more like AC_INIT and accept a space
## ---------------------------------------------------- ##
## ------------------------------------------------------------- ##
delimited list of options. Instead of calling `AC_LIBTOOL_DLOPEN;
## ------------------------------------------------------------- ##
## -------------------------------------------------- ##
AC_PROG_LIBTOOL', we now recommend `LT_INIT([dlopen])':
## -------------------------------------------------- ##
## ---------------------------------------------- ##
* m4/libtool.m4 (AC_PROG_LIBTOOL, _AC_PROG_LIBTOOL)
## ---------------------------------------------- ##
## ----------------------------------------- ##
(AC_LIBTOOL_SETUP): Removed. Added AU_DEFUNs.
## ----------------------------------------- ##
## ------------------------------------------------------------- ##
(LT_INIT): Replace with an Autoconf like interface which accepts a
## ------------------------------------------------------------- ##
## ------------------------------------------------------------ ##
version number as a minimum required libtool release at configure
## ------------------------------------------------------------ ##
## ##
time.
## ##
## ------------------------------------------------------------ ##
* m4/ltoptions.m4: New file inspired by automake/m4/amoptions.m4,
## ------------------------------------------------------------ ##
## ------------------------------------------------------- ##
which additionally flags an error if the configuring libtool
## ------------------------------------------------------- ##
## ------------------------------------------ ##
macros are not new enough according to LT_INIT.
## ------------------------------------------ ##
## ---------------------------------------------------- ##
(LT_OPTION_DEFINE): New macro to declare option handlers.
## ---------------------------------------------------- ##
## ---------------------------------------------- ##
(dlopen, win32-dll, shared, disable-shared, static)
## ---------------------------------------------- ##
## --------------------------------------------------------- ##
(disable-static, fast-install, disable-fast-install, pic-only)
## --------------------------------------------------------- ##
## -------------------------------------------------------- ##
(no-pic): Newly LT_OPTION_DEFINEd option handlers that use...
## -------------------------------------------------------- ##
## ---------------------------------------------------------- ##
(_LT_ENABLE_SHARED, _LT_ENABLE_STATIC, _LT_ENABLE_FAST_INSTALL)
## ---------------------------------------------------------- ##
## ---------------------------------------------- ##
(_LT_WITH_PIC, _LT_WIN32_DLL): New macros to handle
## ---------------------------------------------- ##
## --------------------- ##
LT_LIBTOOL_INIT options...
## --------------------- ##
## ----------------------------------------------- ##
* m4/libtool.m4 (AC_ENABLE_SHARED, AC_ENABLE_STATIC)
## ----------------------------------------------- ##
## ------------------------------------------------------------- ##
(AC_ENABLE_FAST_INSTALL, AC_LIBTOOL_DLOPEN, AC_LIBTOOL_WIN32_DLL):
## ------------------------------------------------------------- ##
## ---------------------------------------------------- ##
...to replace these user interface macros, now defined as
## ---------------------------------------------------- ##
## ----- ##
AU_DEFUNs.
## ----- ##
## ----------------------------------------------------------- ##
(AC_DISABLE_SHARED, AC_DISABLE_STATIC, AC_DISABLE_FAST_INSTALL):
## ----------------------------------------------------------- ##
## ------------------------------------------------------- ##
Removed. No longer required with LT_INIT_LIBTOOL interface.
## ------------------------------------------------------- ##
## ----------- ##
Added AU_DEFUNs.
## ----------- ##
## -------------------------------------------------- ##
(AM_ENABLE_SHARED, AM_DISABLE_SHARED, AM_ENABLE_STATIC)
## -------------------------------------------------- ##
## --------------------------------------------------------- ##
(AM_DISABLE_STATIC): Changed AU_DEFUNs to match new interface.
## --------------------------------------------------------- ##
## ------------------------------------------------------- ##
(_LT_SETUP): Internal to LT_INIT, replaces AC_LIBTOOL_SETUP.
## ------------------------------------------------------- ##
## --------------------------------------------------- ##
* m4/lt~obsolete.m4 (AC_LIBTOOL_SETUP, _AC_PROG_LIBTOOL)
## --------------------------------------------------- ##
## ------------------------------------------------------- ##
(_LT_PROG_LTMAIN): More AC_DEFUNs that have been retracted.
## ------------------------------------------------------- ##
## ----------------------------- ##
* configure.ac: Use new interface.
## ----------------------------- ##
## -------------------------------------- ##
* doc/libtool.texi: Document new interface.
## -------------------------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## ------------------------------------- ##
2004-02-18 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
* commit (SHELL): Set it explicitly, incase some madman is using
## ----------------------------------------------------------- ##
## ------------------------ ##
tcsh as their login shell :-b
## ------------------------ ##
## ----------------------------------------------- ##
2004-02-15 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ----------------------------------------------------- ##
* Makefile.am (m4/ltversion.m4): Generate serial number by
## ----------------------------------------------------- ##
## ---------------------------------------------------------- ##
removing initial '1.' from the revision, replace @MACRO_SERIAL@
## ---------------------------------------------------------- ##
## ------------------ ##
with this new variable.
## ------------------ ##
## ------------------------------------------------------ ##
* m4/ltversion.in: Use @MACRO_SERIAL@ for the serial number
## ------------------------------------------------------ ##
## ------------------------------------------- ##
as some shells don't like a '.' when using test.
## ------------------------------------------- ##
## -------------------------------------------------------- ##
* m4/ltversion.in: Add a serial number to this file otherwise
## -------------------------------------------------------- ##
## ------------------------------------------------------- ##
libtoolize will refuse to copy it into $pkgdatadir, where it
## ------------------------------------------------------- ##
## ---------------------- ##
is needed by m4/libtool.m4.
## ---------------------- ##
## --------------------------------------- ##
2004-02-15 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## ---------------------------------------------------- ##
* m4/libtool.m4, ltmain.in: Rename shrext to shrext_cmds.
## ---------------------------------------------------- ##
## ----------------------------------------------- ##
2004-02-13 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ----------------------------------------------------------- ##
* ltmain.in, libtoolize.in, commit, config/mailnotify: Correctly
## ----------------------------------------------------------- ##
## --------------------------------------------------------- ##
quote usage of $basename and $dirname to avoid (unlikely) path
## --------------------------------------------------------- ##
## ----- ##
expansion.
## ----- ##
## ----------------------------------------------------------- ##
* tests/sh.test: Test the config/ltmain.sh and libtoolize in the
## ----------------------------------------------------------- ##
## ----------------------------------------------------------- ##
build directory not the source directory, where they won't exist
## ----------------------------------------------------------- ##
## ------------------- ##
during 'make distcheck'.
## ------------------- ##
## -------------------------------------------------------- ##
* ltmain.in: Revert one line of previous intendation clean-up
## -------------------------------------------------------- ##
## --------------------------------------- ##
to enable one of the sh.test checks to pass.
## --------------------------------------- ##
## -------------------------------------------------------- ##
* tests/cdemo/configure.ac: Drop AC_PREREQ back to 2.54, this
## -------------------------------------------------------- ##
## ------------------------------------------------------ ##
was debris from Gary's cvsapply going mad and wasn't backed
## ------------------------------------------------------ ##
## ##
out.
## ##
## ----------------------------------------------- ##
* Makefile.am (pkgmacro_DATA): We have to distribute
## ----------------------------------------------- ##
## ------------------------------------------------------- ##
m4/ltversion.m4 because it can be needed before the Makefile
## ------------------------------------------------------- ##
## -------------------- ##
that generates it exists.
## -------------------- ##
## ------------------------------------- ##
2004-02-13 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## --------------------------------------------------- ##
* commit (MKSTAMP): Look for mkstamp in the right place.
## --------------------------------------------------- ##
## ----------------------------------------------- ##
2004-02-12 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ------------------------------------------------------ ##
* Makefile.maint, Makefile: Move rules intended for Libtool
## ------------------------------------------------------ ##
## ---------------------------------------------------------- ##
maintainers only out of the Makefile we distribute and into one
## ---------------------------------------------------------- ##
## ------------------------- ##
that we only need keep in CVS.
## ------------------------- ##
## --------------------------------------------------------- ##
* README-alpha: Add -fMakefile.maint to the instructions where
## --------------------------------------------------------- ##
## -- ##
needed.
## -- ##
## ----------------------------------------------------- ##
2004-02-12 Albert Chin-A-Young <address@hidden>
## ----------------------------------------------------- ##
## ------------------------------------ ##
Scott James Remnant <address@hidden>
## ------------------------------------ ##
## ---------------------------------------------- ##
* ltmain.in: Fix typo: duplcations -> duplications,
## ---------------------------------------------- ##
## ------------------------------------------------- ##
Fix indentation of a handful of badly indented blocks,
## ------------------------------------------------- ##
## ------------------------------------- ##
Fix last remaining use of 'grep' to $GREP,
## ------------------------------------- ##
## ------------------------------------------------------- ##
Remove unnecessary trailing slash where we break a line on a
## ------------------------------------------------------- ##
## ------------- ##
command separator.
## ------------- ##
## -------------------------------------------------------- ##
* m4/libtool.m4: Also remove unnecessary trailing slash where
## -------------------------------------------------------- ##
## ---------------------------------- ##
we break a line on a command separator.
## ---------------------------------- ##
## ----------------------------------------------- ##
2004-02-12 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ------------------------------------------------------ ##
* m4/ltoptions.m4: This got committed by an over-keen Gary,
## ------------------------------------------------------ ##
## ---------------------------------------------------------- ##
but the support for this isn't ready yet and if aclocal decides
## ---------------------------------------------------------- ##
## ---------------------------------------------------------- ##
to m4_include this (which it will) you'll get a non-functioning
## ---------------------------------------------------------- ##
## ------------- ##
libtool. Removed.
## ------------- ##
## ------------------------------------------------- ##
* ltmain.in: Remove duplicated version checking block.
## ------------------------------------------------- ##
## ----------------------------------------------------------- ##
* bootstrap, m4/libtool.m4: Argh, Gary went crazy after cvsapply
## ----------------------------------------------------------- ##
## ------------------------------------------------------------- ##
went crazy and backed out more than he should've. This patch puts
## ------------------------------------------------------------- ##
## ----------------- ##
some of it back again.
## ----------------- ##
## -------------------------------------------------------- ##
* ltmain.in, libtoolize.in, commit, config/mailnotify: Remove
## -------------------------------------------------------- ##
## ---------------------------------------------------------- ##
$SED from definitions of $dirname and $basename and prefix each
## ---------------------------------------------------------- ##
## --------------------------------------------------------- ##
use with it instead. Some shells (zsh) treat the expansion as
## --------------------------------------------------------- ##
## ------------------------------------------------ ##
a single command instead of a command with arguments.
## ------------------------------------------------ ##
## ------------------------------------------------------ ##
* config/mailnotify (func_sendmail): Look for sendmail in a
## ------------------------------------------------------ ##
## --------------------------------------- ##
couple of common non-PATH locations as well.
## --------------------------------------- ##
## ------------------------------------ ##
* ltmain.in: Fix typo: macro's -> macros.
## ------------------------------------ ##
## -------------------------------------------------------- ##
* ltmain.in: Correct definition of basename sed expression to
## -------------------------------------------------------- ##
## --------------------- ##
not include single quotes.
## --------------------- ##
## ------------------------------------- ##
2004-02-12 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
* libtoolize.in: Use $progpath as for ltmain.in to work around the
## ------------------------------------------------------------- ##
## -------------------- ##
IRIX bug described below.
## -------------------- ##
## ----------------------------------------------------------- ##
* commit, config/mailnotify: Ditto. Resynch with cvs-utils HEAD.
## ----------------------------------------------------------- ##
## ------------------------------------------------------ ##
2004-02-12 Albert Chin-A-Young <address@hidden>,
## ------------------------------------------------------ ##
## ------------------------------ ##
Gary V. Vaughan <address@hidden>
## ------------------------------ ##
## ----------------------------------------------------------- ##
* ltmain.in (progpath): Work around backward compatibility issue
## ----------------------------------------------------------- ##
## ------------------------------------------------------------- ##
on IRIX 6.5. On IRIX 6.4+, sh is ksh but when the shell is invoked
## ------------------------------------------------------------- ##
## ------------------------------------------------------------ ##
as "sh" and the current value of the _XPG environment variable is
## ------------------------------------------------------------ ##
## ------------------------------------------------------------ ##
not equal to 1 (one), the special positional parameter $0, within
## ------------------------------------------------------------ ##
## -------------------------------------------------------- ##
a function call, is the name of the function. So, rather than
## -------------------------------------------------------- ##
## ------------------------------------------------------------- ##
using "$0" in functions, we set $progpath in the body and use that
## ------------------------------------------------------------- ##
## ------------------------------------------------- ##
everywhere instead (incase of code refactoring later).
## ------------------------------------------------- ##
## ---------------------------------------------------- ##
(EXIT_SUCCESS, EXIT_FAILURE, EXIT_MISMATCH): For clarity.
## ---------------------------------------------------- ##
## ------------------------------------- ##
2004-02-12 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
* Makefile.am (EXTRA_DIST): Remove config/mailnotify after all; it
## ------------------------------------------------------------- ##
## ---------------------------------- ##
is of no use in a distribution tarball.
## ---------------------------------- ##
## ------------------------------------- ##
2004-02-11 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## --------------------------- ##
* commit: Fix cut-n-paste error.
## --------------------------- ##
## ------------------------------------------------------------ ##
* commit: Completely change CVS/Root->name sed script to actually
## ------------------------------------------------------------ ##
## ------------------------ ##
work when :ext: is not shown.
## ------------------------ ##
## ------------------------------------------------------------ ##
* commit: Improve CVS/Root->name sed script to work when :ext: is
## ------------------------------------------------------------ ##
## ----- ##
not shown.
## ----- ##
## ----------------------------------------------------- ##
2004-02-11 Albert Chin-A-Young <address@hidden>
## ----------------------------------------------------- ##
## --------------------------------------------- ##
* m4/libtool.m4: Fix typo: testring -> teststring.
## --------------------------------------------- ##
## ------------------------------------- ##
2004-02-11 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## -------------------------------------- ##
* commit: Mail a nicer commit notification.
## -------------------------------------- ##
## ------------------------------------- ##
2004-02-10 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------- ##
* NEWS, bootstrap, configure.ac, ltmain.in, m4/libtool.m4:
## ----------------------------------------------------- ##
## --------------------------------------------------------------- ##
* m4/lt~obsolete.m4, tests/cdemo/configure.ac: Arghh. cvsapply just
## --------------------------------------------------------------- ##
## ------------------------------------------------------------- ##
went crazy and committed a bunch of stuff that shouldn't have been
## ------------------------------------------------------------- ##
## ---------------------------------------------- ##
in the last changeset. The patch backs it all out.
## ---------------------------------------------- ##
## ---------------------------------------------------------- ##
* config/mailnotify: New file for mailing commit notifications,
## ---------------------------------------------------------- ##
## ------------------- ##
imported from cvs-utils.
## ------------------- ##
## ---------------------------------------------------- ##
* commit: Updated from cvs-utils and tweaked for libtool.
## ---------------------------------------------------- ##
## --------------------------------------------- ##
* Makefile.am (EXTRA_DIST): Add config/mailnotify.
## --------------------------------------------- ##
## ------------------------------------- ##
2004-02-06 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
* bootstrap: Remove vcl.tmp, otherwise it can interfere with make.
## ------------------------------------------------------------- ##
## ----------------------------------------------------------- ##
* Makefile.am (vcl.tmp): Move comment out of multi-line command,
## ----------------------------------------------------------- ##
## ---------------------------------------------------------- ##
as this rule is called from bootstrap as if it were a Makefile.
## ---------------------------------------------------------- ##
## ------------------------------------------------------------ ##
* m4/ltversion.in: New file to capture what version number macros
## ------------------------------------------------------------ ##
## ---------- ##
are being used.
## ---------- ##
## ------------------------------------------------------ ##
* Makefile.am (m4/ltversion.m4): New rule to create it from
## ------------------------------------------------------ ##
## ----------- ##
m4/ltversion.in.
## ----------- ##
## --------------------------------------- ##
(nodist_pkgmacro_DATA): Add m4/ltversion.m4.
## --------------------------------------- ##
## ----------------------------- ##
(EXTRA_DIST): Add m4/ltversion.in.
## ----------------------------- ##
## ----------------------------------------------------------- ##
* m4/libtool.m4 (AC_LIBTOOL_SETUP): AC_REQUIRE LTVERSION_VERSION
## ----------------------------------------------------------- ##
## ------------- ##
from ltversion.m4.
## ------------- ##
## ------------------------------------------------- ##
* bootstrap: Call the Makefile.am to create an initial
## ------------------------------------------------- ##
## ----------- ##
m4/ltversion.m4.
## ----------- ##
## -------------------------------------------------------- ##
* ltmain.in: Diagnose version mismatches of various flavours.
## -------------------------------------------------------- ##
## ------------------------ ##
* TODO: Remove mismatch item.
## ------------------------ ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## -------------------------------------------------- ##
* Makefile.am ($(top_builddir)/config.status): Removed.
## -------------------------------------------------- ##
## ------------------------------------------------------------ ##
* configure.ac (CONFIG_STATUS_DEPENDENCIES): This substitution is
## ------------------------------------------------------------ ##
## -------------------------------------------------------- ##
how automake-1.8 now informs all Makefiles when config.status
## -------------------------------------------------------- ##
## --------------- ##
needs to be rebuilt.
## --------------- ##
## --------------------------------------------- ##
Reported by Alexandre Duret-Lutz <address@hidden>
## --------------------------------------------- ##
## ----------------------------------------------------------- ##
* configure.ac (AC_CONFIG_FILES): Generate libtoolize from here.
## ----------------------------------------------------------- ##
## ---------------------------------------------------------- ##
* Makefile.am (libtool, libtoolize): These rules are redundant.
## ---------------------------------------------------------- ##
## ---------------------------------------------------- ##
Automake generates better rules for remaking these files.
## ---------------------------------------------------- ##
## ----------------------------------------------------------- ##
* m4/libtool.m4 (AC_LIBTOOL_SETUP): Catch unexpanded macros with
## ----------------------------------------------------------- ##
## ----------------------- ##
beginning with LT_ and _LT_.
## ----------------------- ##
## ----------------------------------------------------------- ##
* configure.ac (LT_MAJOR, LT_MINOR, LT_MICRO, LT_ALPHA): Renamed
## ----------------------------------------------------------- ##
## ----------------------------------------------------------- ##
to lt_major, lt_minor, lt_micro, lt_alpha to save triggering the
## ----------------------------------------------------------- ##
## ------------------- ##
unexpanded macros error.
## ------------------- ##
## -------------------------------------------------------- ##
* m4/libtool.m4 (AC_PROVIDE_IFELSE): Removed. We now require
## -------------------------------------------------------- ##
## ---------------------------------------- ##
Autoconf 2.58, which ships this macro anyway.
## ---------------------------------------- ##
## ----------------------- ##
* Makefile.am: Comment typo.
## ----------------------- ##
## ---------------------------------------------------------- ##
* m4/libtool.m4 (LT_PREREQ): Declare the minimum release number
## ---------------------------------------------------------- ##
## --------------------------------- ##
that is required for the calling code.
## --------------------------------- ##
## --------------------------------------------- ##
* doc/libtool.texi (AC_PROG_LIBTOOL): Document it.
## --------------------------------------------- ##
## ----------- ##
* NEWS: Updated.
## ----------- ##
## --------------------------------------- ##
2004-02-05 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## ------------------------------------------------------ ##
* ltmain.in (infer_tag, win32_libid): Style changes. Rename
## ------------------------------------------------------ ##
## ----------------------------------------------------------- ##
infer_tag to func_infer_tag and win32_libid to func_win32_libid.
## ----------------------------------------------------------- ##
## ------------------------------------------------------------ ##
* m4/libtool.m4 (cygwin): rename win32_libid to func_win32_libid.
## ------------------------------------------------------------ ##
## --------------------------------------- ##
2004-02-04 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## ------------------------------------------------------------ ##
* ltmain.in (infer_tag): Move tag inferrence to a shell function.
## ------------------------------------------------------------ ##
## ---------------------------------------------------------- ##
Also test $base_compile against $CC with escaped arguments. Bug
## ---------------------------------------------------------- ##
## ---------------------------------------- ##
reported by Geoff Keating <address@hidden>.
## ---------------------------------------- ##
## ----------------------------------------------- ##
2004-02-03 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## -------------------------------------------------------- ##
* Makefile.am (install-data-hook): Manually make config.guess
## -------------------------------------------------------- ##
## ------------------------------------------------------- ##
and config.sub executable after they are installed as _DATA.
## ------------------------------------------------------- ##
## ------------------------------------------------- ##
We can't use _SCRIPTS because the various program name
## ------------------------------------------------- ##
## ----------------------------- ##
transforms may be applied to them.
## ----------------------------- ##
## ----------------------------------------------------- ##
(dist_pkgdata_DATA): List config.guess and config.sub here
## ----------------------------------------------------- ##
## ------------------------------ ##
(pkgdata_SCRIPTS): instead of here.
## ------------------------------ ##
## ----------------------------------------------- ##
2003-02-03 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ------------------------------------------------------- ##
* ltmain.in: Create temporary directory under a strict umask
## ------------------------------------------------------- ##
## -------------------------------------------------- ##
rather than running chmod afterwards, preventing a race
## -------------------------------------------------- ##
## ---------------------------------------------------------- ##
condition where the directory could be replaced with a symbolic
## ---------------------------------------------------------- ##
## ------------------------------------- ##
link in the time between the two commands.
## ------------------------------------- ##
## --------------------------------------- ##
2004-01-31 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## ------------------------------------------------------- ##
* m4/libtool.m4 (_LT_CONFIG_STATUS_DECLARE): Change `echo to
## ------------------------------------------------------- ##
## -------------------------------------------------------- ##
`$echo, causes problems when builtin echo is broken. Reported
## -------------------------------------------------------- ##
## --------------------------------------- ##
by Ralf Wildenhues <address@hidden>.
## --------------------------------------- ##
## ----------------------------------------------- ##
2004-01-27 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## --------------------------------------------------------- ##
This fixes release procedure problems discovered whilst making
## --------------------------------------------------------- ##
## ------------- ##
the 1.5.2 release.
## ------------- ##
## ------------------------------------------------------- ##
* Makefile.am (cvs-dist): Because we check whether ChangeLog
## ------------------------------------------------------- ##
## ------------------------------------------------------ ##
has been committed, this rule can't be run with uncommitted
## ------------------------------------------------------ ##
## ------------------------------------------------ ##
source so we can't run 'commit' and don't need to run
## ------------------------------------------------ ##
## -------------------------------------------------- ##
'make dist' a second time. Fix CVS tag as it should be
## -------------------------------------------------- ##
## ----------------------- ##
"release-X" not "Release-X".
## ----------------------- ##
## ----------------------------------------------------- ##
(cvs_commit): New rule for the cvs-release chain that runs
## ----------------------------------------------------- ##
## --- ##
'commit'
## --- ##
## ----------------------------------------------------------- ##
(cvs-release): Depend on cvs-commit, depend on deltas instead of
## ----------------------------------------------------------- ##
## --------------- ##
cvs-diff and xdelta.
## --------------- ##
## ----------------------------------------- ##
(cvs-diff): Removed, replaced with delta-diff.
## ----------------------------------------- ##
## -------------------------------------------------------- ##
(delta-diff): Unpack and diff the old and new tarballs rather
## -------------------------------------------------------- ##
## ----------------------------------------------- ##
than using CVS, so we get a genuinely complete diff.
## ----------------------------------------------- ##
## ----------------------------------------- ##
(xdelta): Removed, replaced with delta-xdelta.
## ----------------------------------------- ##
## --------------------------------------- ##
(got-xdelta): New rule for improved reading.
## --------------------------------------- ##
## ----------------------------------------------------------- ##
(delta-xdiff): Copied and cleaned up version of old xdelta rule.
## ----------------------------------------------------------- ##
## ---------------------------------------------------------- ##
(deltas): Depends on delta-diff and delta-xdelta (make deltas).
## ---------------------------------------------------------- ##
## ------------------------------------------------------------ ##
(cvs-news): Don't depend on timestamps, cvs-dist itself does now.
## ------------------------------------------------------------ ##
## ------------------------------------------------------------- ##
(prev-tarball): This is the only place we need a LASTRELEASE check
## ------------------------------------------------------------- ##
## ------------------------------------------------------- ##
so copy the code here and remove the CHECK_RELEASE variable.
## ------------------------------------------------------- ##
## ---------------------------------------------------------- ##
(new-tarball): Check there's a new tarball (did cvs-dist work?)
## ---------------------------------------------------------- ##
## ------------------------------------------ ##
(FETCHFILES): Remove obsolete libltdl mentions.
## ------------------------------------------ ##
## ---------------------------------------------------------- ##
* README-alpha: Update CVS instructions as everything's changed
## ---------------------------------------------------------- ##
## ------- ##
on Savannah.
## ------- ##
## -------------------------------------------------------- ##
(Release procedure): Update NEWS and ChangeLog after changing
## -------------------------------------------------------- ##
## ---------------------------------------------------------- ##
the version number (both times); Run 'make fetch' after running
## ---------------------------------------------------------- ##
## -------------------------------------------------------- ##
'configure' (difficult to do it beforehand); Require 'commit'
## -------------------------------------------------------- ##
## -------------------------------------------------------- ##
before 'make cvs-dist' as that checks ChangeLog is committed;
## -------------------------------------------------------- ##
## ------------------------------------------------------------- ##
'make deltas' instead of 'cvs-diff' and 'xdelta', pass LASTRELEASE
## ------------------------------------------------------------- ##
## ------------------------------------------------------- ##
to make instead of OLDVERSION (and it's mandatory); Clean up
## ------------------------------------------------------- ##
## --------------------------------------------------------- ##
uploading paragraph; Clearer announcement sending instruction;
## --------------------------------------------------------- ##
## ------------------------------------------------------- ##
Removed address@hidden mail as that's not necessary now;
## ------------------------------------------------------- ##
## ---------------------------------------------------------------- ##
Make web page updating instructions a bit clearer; Add an instruction
## ---------------------------------------------------------------- ##
## ------------------------------- ##
to update the manual for non-alphas.
## ------------------------------- ##
## ----------------------------------------------------------------- ##
(Alpha release note template): Add a Subject; update CVS instructions.
## ----------------------------------------------------------------- ##
## ---------------------------------------------------------------- ##
(Full release note template): Add a Subject; update CVS instructions.
## ---------------------------------------------------------------- ##
## -------------------------------------------------------- ##
* configure.ac: Add dist-bzip2 to AM_INIT_AUTOMAKE as we talk
## -------------------------------------------------------- ##
## ------------------------------------------------------------- ##
about bz2 files in our release announcements; remove old reference
## ------------------------------------------------------------- ##
## --------- ##
to OLDVERSION.
## --------- ##
## ----------------------------------------------- ##
2004-01-25 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ------------------------------------- ##
* NEWS: Include 1.5.2 release information.
## ------------------------------------- ##
## ------------------------------------- ##
2004-01-22 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
This fixes a bug in the libtoolize ltdl source installation rules,
## ------------------------------------------------------------- ##
## -------------------------------------------------------- ##
which were copying Makefile.in from the libtool tree into the
## -------------------------------------------------------- ##
## ----------------------------------------------------------- ##
package running libtoolize. Now we explicitly list the files to
## ----------------------------------------------------------- ##
## ----------------------------------------------------- ##
copy to force the package to generate its own Makefile.in:
## ----------------------------------------------------- ##
## ----------------------------------------------------------- ##
* libltdl/Makefile.am (libltdl_la_SOURCES, libltdlc_la_SOURCES):
## ----------------------------------------------------------- ##
## ------ ##
Add ltdl.h.
## ------ ##
## ---------------------------------------------------- ##
(ltdldatadir): New variable for installation directory of
## ---------------------------------------------------- ##
## ------------------- ##
libtoolize --ltdl files.
## ------------------- ##
## ------------------------------------------------------------- ##
(ltdldata_DATA): Tell automake what files to copy there at install
## ------------------------------------------------------------- ##
## ------------------------------- ##
time (and remove at unistall time!).
## ------------------------------- ##
## ----------------------------------------------------- ##
(local-install-files): Removed. This hack is not required
## ----------------------------------------------------- ##
## ------------------------------------------------------ ##
anymore, the automake generated install rules are much more
## ------------------------------------------------------ ##
## -------------- ##
advanced than this.
## -------------- ##
## ------------------------------------------------------- ##
* Makefile.am (install-data-hook, uninstall-local): Removed.
## ------------------------------------------------------- ##
## ----------------------------------------------------------- ##
Libltdl files for libtoolize are installed by their own Makefile
## ----------------------------------------------------------- ##
## ##
now.
## ##
## ------------------------------------------ ##
2004-01-22 Jeff Squyres <address@hidden>
## ------------------------------------------ ##
## --------------------------------------------------- ##
* m4/libtool.m4 (AC_LIBTOOL_PROG_CC_C_O): Some compilers
## --------------------------------------------------- ##
## --------------------------------------------------------------- ##
(e.g. Intel Linux icc compiler) write temporary files to the current
## --------------------------------------------------------------- ##
## ------------------------------------------------------------- ##
directory. These compilers do support -c and -o simultaneously but
## ------------------------------------------------------------- ##
## ------------------------------------------------------- ##
wrongly fail the test due to the failure to create temporary
## ------------------------------------------------------- ##
## ------------------------------------------------------------- ##
files. It is incorrect to penalize compilers which write temporary
## ------------------------------------------------------------- ##
## ---------------------------------------------------------- ##
files to the current directory so the 'chmod -w .' is therefore
## ---------------------------------------------------------- ##
## --- ##
removed.
## --- ##
## ------------------------------------- ##
2004-01-22 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## -------------------------------------------------------- ##
* m4/libtool.m4 (LT_AC_PROG_EGREP): Wrapper for AC_PROG_GREP.
## -------------------------------------------------------- ##
## --------------------------------------------------- ##
AIX has a brain-dead grep that only handles lines < 2048
## --------------------------------------------------- ##
## ----------------------------------------------------- ##
characters. Default GREP incase we are not using a future
## ----------------------------------------------------- ##
## ------------------------------------------------------------- ##
autoconf that sets it for us :-) Changed all callers to use $GREP
## ------------------------------------------------------------- ##
## ----------------------------------------------- ##
instead of grep, and to AC_REQUIRE LT_AC_PROG_EGREP.
## ----------------------------------------------- ##
## -------------------------------- ##
Declare GREP as a libtool config var.
## -------------------------------- ##
## --------------- ##
* ltmain.in: Use it.
## --------------- ##
## ----------------------------------------------------- ##
* tests/sh.test (scripts): Accept `if $GREP "^foo=bar"' by
## ----------------------------------------------------- ##
## ----------------- ##
tightening the regexp.
## ----------------- ##
## ------------------------------------------------------ ##
Reported by Albert Chin-A-Young <address@hidden>
## ------------------------------------------------------ ##
## ------------------------------------- ##
2004-01-21 Nick Hudson <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------ ##
* m4/libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER) [netbsd*]: Remove
## ------------------------------------------------------------ ##
## -------------------------------------------- ##
gratuitous ${libname}${release}${shared_ext} from
## -------------------------------------------- ##
## -------------- ##
library_names_spec.
## -------------- ##
## --------------------------------------- ##
2004-01-21 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## --------------------------------------------------------- ##
* m4/libtool.m4 (AC_PROG_LD_RELOAD_FLAG): On darwin change the
## --------------------------------------------------------- ##
## ----------------------------------------------------- ##
reload_cmds to use $CC, otherwise ld will thin out any fat
## ----------------------------------------------------- ##
## --- ##
objects.
## --- ##
## ---------------------------------------- ##
2004-01-18 Benjamin Reed <address@hidden>
## ---------------------------------------- ##
## --------------------------------------------------------- ##
* ltmain.in: Fix handling of frameworks in search paths. Also
## --------------------------------------------------------- ##
## -------------------------------------------------------- ##
a one-liner fix to eval shrext in the libtool library search.
## -------------------------------------------------------- ##
## ------------------------------------- ##
2004-01-16 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
* configure.ac (AM_INIT_AUTOMAKE): Require 1.8 for bootstrap, or
## ----------------------------------------------------------- ##
## -------------------------------------------------------- ##
else aclocal.m4 is huge, and m4 directory is not distributed.
## -------------------------------------------------------- ##
## ------------------------------------------------- ##
* configure.ac (AC_CONFIG_HEADERS): Create config.h in
## ------------------------------------------------- ##
## ------- ##
$top_srcdir.
## ------- ##
## ------------------------------------------------------------ ##
* m4/ltdl.m4 (AC_LIB_LTDL): Run AC_CONFIG_HEADERS for the user if
## ------------------------------------------------------------ ##
## ----------------------------------------------- ##
necessary. Calculate filename from first argument to
## ----------------------------------------------- ##
## ----------------------------------------- ##
AC_CONFIG_HEADERS, and substitute as CONFIG_H.
## ----------------------------------------- ##
## ------------------------------------------------------------- ##
* libltdl/Makefile.am (AM_CPPFLAGS): Make sure we are searching in
## ------------------------------------------------------------- ##
## ------------------- ##
$top_srcdir for headers.
## ------------------- ##
## ------------------------------------------------------- ##
(DEFS): Override the default HAVE_CONFIG_H with the config.h
## ------------------------------------------------------- ##
## ---- ##
filename.
## ---- ##
## ----------------------------------------- ##
(ltdl.lo): Reference config.h via $(CONFIG_H).
## ----------------------------------------- ##
## ----------------------------------- ##
* libltdl/ltdl.c (HAVE_CONFIG_H): Ditto.
## ----------------------------------- ##
## ----------------------------------------------- ##
2004-01-15 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## ----------------------------------------------------- ##
* m4/lt~obsolete.m4: Add a file containing aclocal-fooling
## ----------------------------------------------------- ##
## ---------------------------------------------------- ##
macro definitions which stop the contents of an installed
## ---------------------------------------------------- ##
## ---------------------------------------------------- ##
libtool.m4 ending up in our aclocal.m4 when we bootstrap.
## ---------------------------------------------------- ##
## -------------------------------------------------------- ##
* Makefile.am (pkgmacro_DATA): Note that we don't need to add
## -------------------------------------------------------- ##
## ----------------------- ##
lt~obsolete.m4 to this list.
## ----------------------- ##
## ------------------------------------- ##
2004-01-12 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------ ##
* m4/libtool.m4 (_LT_COPYING): Factor out copyright message so it
## ------------------------------------------------------------ ##
## --------------------------------- ##
only needs to be updated in one place.
## --------------------------------- ##
## ------------------------------------------------------- ##
(AC_LIBTOOL_CONFIG): Refactor to be more readable. Only add
## ------------------------------------------------------- ##
## -------------------------------------------------------- ##
tags if a compiler was found; ie if you have no gcj compiler,
## -------------------------------------------------------- ##
## ---------------------------------------------------- ##
don't tack the GCJ tag onto the generated libtool script.
## ---------------------------------------------------- ##
## --------------------------------------- ##
2004-01-13 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## --------------------------------------------------- ##
* m4/libtool.m4: Quote shrext as it is evaled in ltmain.
## --------------------------------------------------- ##
## ----------------------------------------------- ##
2004-01-11 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## -------------------------------------------------- ##
* ltmain.in: new -precious-files-regex link mode option
## -------------------------------------------------- ##
## -------------------------------------------------- ##
to prevent removal of matching files from the temporary
## -------------------------------------------------- ##
## ------------ ##
output directory.
## ------------ ##
## --------------- ##
(Debian Bug #221420)
## --------------- ##
## --------------------------------------- ##
* doc/libtool.texi: document the new option.
## --------------------------------------- ##
## --------------------------- ##
* NEWS: announce the new option.
## --------------------------- ##
## ------------------------------------- ##
2004-01-11 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ---------------------------------------------------------- ##
* libtoolize.in (func_copy_all_files): s/xfunc_copy/Xfunc_copy.
## ---------------------------------------------------------- ##
## --------------------------------------- ##
Now the test can actually succeed sometimes.
## --------------------------------------- ##
## ------------------------------------- ##
2004-01-09 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------- ##
* libtoolize.in: Break out of the command argument parse loop when
## ------------------------------------------------------------- ##
## ------------- ##
-- is encountered.
## ------------- ##
## ------------------------------------- ##
2004-01-08 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------------------ ##
* libtoolize.in (func_copy_all_files): s/test "x/test "X/ to keep
## ------------------------------------------------------------ ##
## --------------- ##
tests/sh.test happy.
## --------------- ##
## ------------------------------------- ##
2004-01-07 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ------------------------------------------------- ##
* Makefile.am (aclocal_macros, aclocal_DATA): Removed.
## ------------------------------------------------- ##
## ------------------------------------------------------ ##
(EXTRA_DIST): Remove m4 macro files; they are automatically
## ------------------------------------------------------ ##
## ------------- ##
added by automake.
## ------------- ##
## ----------------------------------------------- ##
(pkgmacrodir): Where to install libtool macro files.
## ----------------------------------------------- ##
## ------------------------------------------------- ##
(pkgmacro_DATA): List installable libtool macro files.
## ------------------------------------------------- ##
## -------------------------------------------------------- ##
(install-data-local): Remove previous versions of ltdl.m4 and
## -------------------------------------------------------- ##
## ------------------------------ ##
libtool.m4 from their old location.
## ------------------------------ ##
## ----------------------------------------------------- ##
* libtoolize.in: Use new pkgmacrodir installed macros when
## ----------------------------------------------------- ##
## ----------------------------------------------------------- ##
libtoolizing a project. Treat libtool.m4 and ltdl.m4 specially,
## ----------------------------------------------------------- ##
## ----------------------------------------------------- ##
and func_serial_update() any other files from pkgmacrodir.
## ----------------------------------------------------- ##
## ------------------------------------------------------ ##
(pkgmacrodir): Where to find installed libtool macro files.
## ------------------------------------------------------ ##
## ----------------- ##
(aclocaldir): Removed.
## ----------------- ##
## ------------------------------------------------------- ##
(func_copy_all_files): Add an optional callback parameter to
## ------------------------------------------------------- ##
## ---------------------------------------------------------- ##
control how files are copied. If the callback is passed, don't
## ---------------------------------------------------------- ##
## ------------------------------ ##
tell it whether it can copy or not.
## ------------------------------ ##
## ------------------------------------------------------------ ##
(func_serial): Exchange parameters and make macro_regex optional,
## ------------------------------------------------------------ ##
## ----------------------------------------------------------- ##
so that this function can be used to extract serial numbers from
## ----------------------------------------------------------- ##
## ------------------------------------------------------ ##
files with the traditional /^# serial [1-9][0-9]*$/ syntax.
## ------------------------------------------------------ ##
## --------------- ##
Changed all callers.
## --------------- ##
## ------------------------------------------------------------- ##
(func_serial_update): Make macro_regex optional last parameter, so
## ------------------------------------------------------------- ##
## ------------------------------------------- ##
that this function can be used as a callback for
## ------------------------------------------- ##
## --------------------------------------- ##
func_copy_all_files(). Changed all callers.
## --------------------------------------- ##
## -------------------------------- ##
* m4/ltsugar.m4: Add a serial number.
## -------------------------------- ##
## ------------------------------------- ##
2004-01-07 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ---------------------------------------------------------- ##
A complete rewrite of the m4 code involved in the generation of
## ---------------------------------------------------------- ##
## ---------------------------------------------------- ##
libtool via config.status. The old way involved manually
## ---------------------------------------------------- ##
## ----------------------------------------------------------- ##
synchronising disparate bits of shell code in several macros, to
## ----------------------------------------------------------- ##
## ------------------------------------------------------------- ##
quote a copy of a shell variable, put that in config.status, maybe
## ------------------------------------------------------------- ##
## --------------------------------------------------------- ##
add it to some quotation loops to prevent early expansion, and
## --------------------------------------------------------- ##
## ------------------------------------------------------- ##
then add a block to _LT_CONFIG_COMMANDS to bring it into the
## ------------------------------------------------------- ##
## ------------------------------------------------------ ##
libtool script. The new way is to mark shell variables for
## ------------------------------------------------------ ##
## ------------------------------------------------------------ ##
propogation using _LT_DECL for language independent variables, or
## ------------------------------------------------------------ ##
## ------------------------------------------------------ ##
_LT_TAGDECL for those that need to be propogated in several
## ------------------------------------------------------ ##
## -------------------------------------------------------- ##
language flavours. The marking can be done in the macro that
## -------------------------------------------------------- ##
## -------------------------------------------------------- ##
probes the variables, and this new m4 machinery takes care of
## -------------------------------------------------------- ##
## ----------------------------------------------------- ##
synchronising all the other bits of code at autoconf time:
## ----------------------------------------------------- ##
## ---------------------------------------------------------- ##
* m4/ltsugar.m4: New file. Macros that are useful outside the
## ---------------------------------------------------------- ##
## --------------------------------------------------------- ##
context of libtool. Initially, contains some generalised list
## --------------------------------------------------------- ##
## ---------------------------------------------------------- ##
management macros, and the scaffolding for dictionary type data
## ---------------------------------------------------------- ##
## ----------------- ##
storage and retrieval.
## ----------------- ##
## ---------------------------------------------- ##
* Makefile.am (aclocal_macros): Install ltsugar.m4.
## ---------------------------------------------- ##
## ---------------------------------------------------------- ##
* m4/libtool.m4 (_LT_DECL): Mark a shell variable for export to
## ---------------------------------------------------------- ##
## ---------------------------------------------------------- ##
the libtool script, along with a comment, and hints for quoting
## ---------------------------------------------------------- ##
## -------- ##
and renaming.
## -------- ##
## ----------------------------------------------------------- ##
(_LT_TAGDECL): Similarly mark a tagged shell variable for export
## ----------------------------------------------------------- ##
## ------- ##
in each tag.
## ------- ##
## ----------------------------------------- ##
(lt_decl_tag_varnames, lt_decl_quote_varnames)
## ----------------------------------------- ##
## --------------------------------------------- ##
(lt_decl_dquote_varnames, lt_decl_varnames_tagged)
## --------------------------------------------- ##
## ------------------------------------------------------------ ##
(lt_decl_all_varnames): New utility macros for managing lists of
## ------------------------------------------------------------ ##
## ---------------------------------------------- ##
shell variable names from _LT_DECL and _LT_TAGDECL.
## ---------------------------------------------- ##
## ------------------------------------------------------- ##
(_LT_CONFIG_STATUS_DECLARATIONS, _LT_CONFIG_STATUS_DECLARE):
## ------------------------------------------------------- ##
## ------------------------------------------------------------ ##
Expand to correctly quoted variable declarations in config.status
## ------------------------------------------------------------ ##
## --------------------------- ##
from all marked shell variables.
## --------------------------- ##
## --------------------------------------------------------- ##
(_LT_LIBTOOL_DECLARE): Expand to commented and quoted variable
## --------------------------------------------------------- ##
## ------------------------------- ##
declaration for libtool tag section.
## ------------------------------- ##
## ----------------------------------------------------------- ##
(_LT_LIBTOOL_CONFIG_VARS, _LT_LIBTOOL_TAG_VARS): Pass all marked
## ----------------------------------------------------------- ##
## ---------------------------- ##
variables to _LT_LIBTOOL_DECLARE.
## ---------------------------- ##
## -------------------------------------------------------- ##
(_LT_CONFIG_COMMANDS): Use _LT_CONFIG_STATUS_DECLARATIONS and
## -------------------------------------------------------- ##
## ------------------------------------------------------ ##
friends to generate all the variable passing shell code for
## ------------------------------------------------------ ##
## ------------------------------------------------------ ##
config.status, to get marked variables from libtool.m4 into
## ------------------------------------------------------ ##
## --------------------- ##
libtool itself eventually.
## --------------------- ##
## ------------------------------------------------------------- ##
(AC_LIBTOOL_CONFIG): Generate marked variable code for libtool tag
## ------------------------------------------------------------- ##
## ------------------------------------------------------ ##
configuration. Changed all client macros to mark variables
## ------------------------------------------------------ ##
## --------------------------------------------------- ##
suitably rather than the hand pasting that was necessary
## --------------------------------------------------- ##
## ------ ##
previously.
## ------ ##
## -------------------------------------- ##
(AC_PROG_SED): Renamed from LT_AC_PROG_SED.
## -------------------------------------- ##
## ----------------------------------------------------------- ##
(LT_AC_PROG_SED): Wrap AC_PROG_SED, and mark shell variables for
## ----------------------------------------------------------- ##
## ----------------------------- ##
propogation to the libtool script.
## ----------------------------- ##
## ------------------------------------- ##
2004-01-07 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## --------------------------------------------------- ##
* libtoolize.in (seen_gettext): Removed unused variable.
## --------------------------------------------------- ##
## ------------------------------------- ##
2004-01-06 Gary V. Vaughan <address@hidden>
## ------------------------------------- ##
## ----------------------------------------------------------- ##
* libtoolize.in (func_scan_files): Don't assume the existence of
## ----------------------------------------------------------- ##
## ------------------------------------------ ##
aclocal.m4. Make the comment more descriptive.
## ------------------------------------------ ##
## --------------------------------------------- ##
Reported by Alexandre Duret-Lutz <address@hidden>
## --------------------------------------------- ##
## --------------------------- ##
* NEWS: Note libtoolize changes.
## --------------------------- ##
## ----------------------------------------------------------- ##
* ChangeLog.2003: New file, containing all the ChangeLog entries
## ----------------------------------------------------------- ##
## ------------------------------------- ##
from 2003. Trimmed ChangeLog accordingly.
## ------------------------------------- ##
## ------------------------------------------------------------ ##
* ltmain.in: Output 2004 in the copyright from libtool --version.
## ------------------------------------------------------------ ##
## ----------------------------------------------------------- ##
2004-01-03 Stefan Nordhausen <address@hidden>
## ----------------------------------------------------------- ##
## ------------------------------------ ##
Scott James Remnant <address@hidden>
## ------------------------------------ ##
## ----------------------------------------------------- ##
* ltmain.in: Don't use the mkdir -p option when creating a
## ----------------------------------------------------- ##
## ---------------------------------------------------------- ##
temporary output directory so a symlink attack can't be used to
## ---------------------------------------------------------- ##
## ------------------------------------------------------- ##
arbitrarily chmod other directories on the system if libtool
## ------------------------------------------------------- ##
## ------------ ##
gets run as root.
## ------------ ##
## --------------------------------------- ##
2004-01-02 Peter O'Gorman <address@hidden>
## --------------------------------------- ##
## --------------------------------------------------------------- ##
* m4/libtool.m4: Ensure that ${ZSH_VERSION+set} is properly escaped.
## --------------------------------------------------------------- ##
## --------------------------------------------------------- ##
* m4/libtool.m4 (CDPATH): Change the CDPATH setting so that it
## --------------------------------------------------------- ##
## -------------------------------------------------------- ##
allows for zsh differences, as noted in the autoconf manual's
## -------------------------------------------------------- ##
## -------------------------------------------- ##
Portable Shell - Special Shell Variables section.
## -------------------------------------------- ##
## ----------------------------------------------- ##
2004-01-02 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## -------------------------------------------------- ##
* .cvsignore: Ignore stamp-vcl created by the Makefile.
## -------------------------------------------------- ##
## ----------------------------------------------------- ##
2004-01-02 Bob Friesenhahn <address@hidden>
## ----------------------------------------------------- ##
## -------------------------- ##
Joe Orton <address@hidden>
## -------------------------- ##
## ---------------------------------------------------- ##
* m4/libtool.m4 (AC_LIBTOOL_CONFIG): Add extra blackslash
## ---------------------------------------------------- ##
## ----------------------------------------------------- ##
in front of all the inner double-quotes as this is removed
## ----------------------------------------------------- ##
## ------------------------------------------------- ##
on Solaris, IRIX and AIX leading to broken definitions
## ------------------------------------------------- ##
## ------------ ##
in config.status.
## ------------ ##
## ----------------------------------------------- ##
2004-01-02 Scott James Remnant <address@hidden>
## ----------------------------------------------- ##
## -------------------------------- ##
* NEWS: Next release will be in 2004.
## -------------------------------- ##
## --------------------- ##
Continued in ChangeLog.2003
## --------------------- ##
## ------------------------------ ##
1.1585 2004/09/01 01:43:18) 1.9c ##
## ------------------------------ ##
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.exe
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... .exe
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... g77
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether g77 accepts -g... yes
checking build system type... i686-pc-mingw32
checking host system type... i686-pc-mingw32
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... c:/mingw/mingw32/bin/ld.exe
checking if the linker (c:/mingw/mingw32/bin/ld.exe) is GNU ld... yes
checking for BSD-compatible nm... /bin/nm -B
checking whether ln -s works... yes
checking the maximum length of command line arguments... 8192
checking for c:/mingw/mingw32/bin/ld.exe option to reload object files... -r
checking how to recognise dependent libraries... file_magic file format
pei*-i386(.*architecture: i386)?
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /bin/nm -B output from object... ok
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... no
checking for as... as
checking for dlltool... dlltool
checking for objdump... objdump
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking for gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (c:/mingw/mingw32/bin/ld.exe) supports shared
libraries... yes
checking whether -lc should be explicitly linked in... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for ld used by g++... c:/mingw/mingw32/bin/ld.exe
checking if the linker (c:/mingw/mingw32/bin/ld.exe) is GNU ld... yes
checking whether the g++ linker (c:/mingw/mingw32/bin/ld.exe) supports shared
libraries... yes
checking for g++ option to produce PIC... -DDLL_EXPORT -DPIC
checking if g++ PIC flag -DDLL_EXPORT -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (c:/mingw/mingw32/bin/ld.exe) supports shared
libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for g77 option to produce PIC... -DDLL_EXPORT
checking if g77 PIC flag -DDLL_EXPORT works... yes
checking if g77 static flag -static works... yes
checking if g77 supports -c -o file.o... yes
checking if g77 supports -c -o file.o... (cached) yes
checking whether the g77 linker (c:/mingw/mingw32/bin/ld.exe) supports shared
libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for an ANSI C-conforming const... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking which extension is used for runtime loadable modules... .dll
checking which variable specifies run-time module search path... PATH
checking for the default library search path... /lib /usr/lib
checking for dlopen in -ldl... no
checking for dlopen in -lsvld... no
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dld_link in -ldld... no
checking for _ prefix in compiled symbols... yes
checking whether deplibs are loaded by dlopen... unknown
checking for argz.h... no
checking for error_t... no
checking for argz_append... no
checking for argz_create_sep... no
checking for argz_insert... no
checking for argz_next... no
checking for argz_stringify... no
checking whether libtool supports -dlopen/-dlpreopen... yes
checking for memory.h... (cached) yes
checking for unistd.h... (cached) yes
checking for dl.h... no
checking for sys/dl.h... no
checking for dld.h... no
checking for mach-o/dyld.h... no
checking for string.h... (cached) yes
checking for closedir... yes
checking for opendir... yes
checking for readdir... yes
checking for gcj... no
checking for windres... windres
configure: creating ./config.status
./config.status: use: command not found
./config.status: compatible.: command not found
./config.status: an: command not found
./config.status: the: command not found
./config.status: line 742: syntax error near unexpected token `(f'
./config.status: line 742: ` * config/ltmain.in (func_extract_dlsyms): Store
originator as a'
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- status of CVS head on mingw,
Bob Friesenhahn <=