Re: [Ltib] Unbuildable tree and backing it up

[Thomas A. Moulton]

Stuart,

It is from Freescale and I think I have found the rot of the problem.

It is a makeflile problem due to differences in make.

I figured out the defconfig.dev, but not the --preconfig option, I like 
that.

tom

Stuart Hughes wrote:
> Hi Tom,
>
> LTIB avoids touching anything in rpm/BUILD/xxx in case you're working on
> source code.  So if you have a failed package build and you want to want
> to rebuild that package from scratch, run:
>
> $ rm -rf rpm/BUILD/<pkg-dir>
> $ ./ltib
>
> Can you tell me if this LTIB was from a Freescale ISO or from the
> savannah CVS?
>
> To "backup" an ltib configuration simply save the file "defconfig.dev"
> in config/platform/<target>  .  This contains all the configuration
> information about your currently configured target.  You can save/rename
> this if you like.  If you later want to re-create from that preconfig
> run:
>
> $ ./ltib --preconfig <path_to_preconfig>
>
> Regards, Stuart
>
> On Mon, 2007-07-23 at 16:00 -0400, Thomas A. Moulton wrote:
>   
> > OK I shot myself in the foot once, I broke out of ltib when it was
> > building the output; I then ended up with a tree that could not
> > build, it gets errors looking for a file.
> >
> > (the BSP is for the MPC8313ERBD from Freescale)
> >
> > I tried
> >
> > ./ltib -m clean
> > ./ltib
> >
> > and I still get the error (below)
> >
> > I am running ubuntu (Feisty Fawn)
> >
> > Also what is the correct way to backup the configuration (ltib dir)
> > so I can easily recover from these kind of things?
> >
> > I tried an root enabled tarball but that did not seem to have enough
> >
> > tom
> > -----------------------------------------------
> > make[1]: Entering directory
> > `/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/examples'
> > powerpc-linux-gcc -g  -Os  -fPIC -ffixed-r14 -meabi -D__KERNEL__
> > -DTEXT_BASE=0xFE000000 
> > -I/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/include
> > -fno-builtin -ffreestanding -nostdinc -isystem
> > /opt/mtwk/usr/local/powerpc-linux/gcc-3.4.3-glibc-2.3.3/lib/gcc/powerpc-linux/3.4.3/include
> > -pipe  -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300
> > -ffixed-r2 -ffixed-r29 -msoft-float -Wall -Wstrict-prototypes -c -o
> > hello_world.o hello_world.c
> > powerpc-linux-gcc -g  -Os  -fPIC -ffixed-r14 -meabi -D__KERNEL__
> > -DTEXT_BASE=0xFE000000 
> > -I/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/include
> > -fno-builtin -ffreestanding -nostdinc -isystem
> > /opt/mtwk/usr/local/powerpc-linux/gcc-3.4.3-glibc-2.3.3/lib/gcc/powerpc-linux/3.4.3/include
> > -pipe  -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300
> > -ffixed-r2 -ffixed-r29 -msoft-float -Wall -Wstrict-prototypes -c -o
> > sched.o sched.c
> > powerpc-linux-gcc  -D__ASSEMBLY__ -g  -Os  -fPIC -ffixed-r14 -meabi
> > -D__KERNEL__ -DTEXT_BASE=0xFE000000 
> > -I/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/include
> > -fno-builtin -ffreestanding -nostdinc -isystem
> > /opt/mtwk/usr/local/powerpc-linux/gcc-3.4.3-glibc-2.3.3/lib/gcc/powerpc-linux/3.4.3/include
> > -pipe  -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300
> > -ffixed-r2 -ffixed-r29 -msoft-float -c -o ppc_longjmp.o ppc_longjmp.S
> > powerpc-linux-gcc  -D__ASSEMBLY__ -g  -Os  -fPIC -ffixed-r14 -meabi
> > -D__KERNEL__ -DTEXT_BASE=0xFE000000 
> > -I/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/include
> > -fno-builtin -ffreestanding -nostdinc -isystem
> > /opt/mtwk/usr/local/powerpc-linux/gcc-3.4.3-glibc-2.3.3/lib/gcc/powerpc-linux/3.4.3/include
> > -pipe  -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300
> > -ffixed-r2 -ffixed-r29 -msoft-float -c -o ppc_setjmp.o ppc_setjmp.S
> > powerpc-linux-gcc -g  -Os  -fPIC -ffixed-r14 -meabi -D__KERNEL__
> > -DTEXT_BASE=0xFE000000 
> > -I/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/include
> > -fno-builtin -ffreestanding -nostdinc -isystem
> > /opt/mtwk/usr/local/powerpc-linux/gcc-3.4.3-glibc-2.3.3/lib/gcc/powerpc-linux/3.4.3/include
> > -pipe  -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300
> > -ffixed-r2 -ffixed-r29 -msoft-float -Wall -Wstrict-prototypes -c -o
> > stubs.o stubs.c
> > powerpc-linux-ar crv libstubs.a ppc_longjmp.o ppc_setjmp.o stubs.o
> > a - ppc_longjmp.o
> > a - ppc_setjmp.o
> > a - stubs.o
> > powerpc-linux-ld -g  -Ttext 0x40000 \
> >                         -o hello_world -e hello_world hello_world.o
> > libstubs.a \
> >                         
> > -L/opt/mtwk/usr/local/powerpc-linux/gcc-3.4.3-glibc-2.3.3/lib/gcc/powerpc-linux/3.4.3
> > -lgcc
> > powerpc-linux-objcopy -O srec hello_world hello_world.srec 2>/dev/null
> > powerpc-linux-ld -g  -Ttext 0x40000 \
> >                         -o sched -e sched sched.o libstubs.a \
> >                         
> > -L/opt/mtwk/usr/local/powerpc-linux/gcc-3.4.3-glibc-2.3.3/lib/gcc/powerpc-linux/3.4.3
> > -lgcc
> > powerpc-linux-objcopy -O srec sched sched.srec 2>/dev/null
> > powerpc-linux-objcopy -O binary hello_world hello_world.bin 2>/dev/null
> > powerpc-linux-objcopy -O binary sched sched.bin 2>/dev/null
> > cd vsc7385_load && make
> > make[2]: Entering directory
> > `/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/examples/vsc7385_load'
> > powerpc-linux-gcc -M -g  -Os  -fPIC -ffixed-r14 -meabi -D__KERNEL__
> > -DTEXT_BASE=0xFE000000 
> > -I/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/include
> > -fno-builtin -ffreestanding -nostdinc -isystem
> > /opt/mtwk/usr/local/powerpc-linux/gcc-3.4.3-glibc-2.3.3/lib/gcc/powerpc-linux/3.4.3/include
> > -pipe  -DCONFIG_PPC -D__powerpc__ -DCONFIG_MPC83XX -DCONFIG_E300
> > -ffixed-r2 -ffixed-r29 -msoft-float -Wall -Wstrict-prototypes
> > vsc7385_load.c > .depend
> > make[2]: Leaving directory
> > `/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/examples/vsc7385_load'
> > make[2]: Entering directory
> > `/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/examples/vsc7385_load'
> > make[2]: *** No rule to make target `vsc7385_load.srec', needed by `all'. 
> > Stop.
> > make[2]: Leaving directory
> > `/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/examples/vsc7385_load'
> > make[1]: *** [vsc7385_load\vsc7385_load.srec] Error 2
> > make[1]: Leaving directory
> > `/home/tom/ltib-mpc8313erdb-20070428/rpm/BUILD/u-boot-1.1.6/examples'
> > make: *** [examples] Error 2
> > error: Bad exit status from
> > /home/tom/ltib-mpc8313erdb-20070428/tmp/rpm-tmp.4170 (%build)
> >
> >
> > RPM build errors:
> >     Bad exit status from
> > /home/tom/ltib-mpc8313erdb-20070428/tmp/rpm-tmp.4170 (%build)
> > Build time for u-boot-1.1.6-mpc8313erdb: 10 seconds
> >
> > Failed building u-boot-1.1.6-mpc8313erdb
> >
> >
> > f_buildrpms() returned an error, exiting
> >
> > Started: Mon Jul 23 15:52:38 2007
> > Ended:   Mon Jul 23 15:52:48 2007
> > Elapsed: 10 seconds
> >
> > These packages failed to build:
> > u-boot-1.1.6-mpc8313erdb
> > Build Failed
> >
> > Exiting on error or interrupt
> > address@hidden:~/ltib-mpc8313erdb-20070428$
> >
> >
> >
> > _______________________________________________
> > LTIB home page: http://bitshrine.org
> >
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
> >     
>
>
>