Re: [Ltib] ltib fails building external linux kernel

[Stuart Hughes]

Hi Fernando,

What command did you run?
When did you update LTIB, I checked in a lot of changes in the last few
days, maybe that broke something?

Can you send me a full log off-list, I want to see if it try to run
'make oldconfig' after copying your kernel preconfig.

Regards, Stuart

On Wed, 2008-12-10 at 16:21 +0100, Fernando Alcojor wrote:
> Hello, i have an issue when i run ltib configured for building a Local
> directory kernel tree. When i do it, ltib complains with the following
> messeages (previously ones omitted):
> 
> 
> ****************************************************************************************************************************************************************************
> # configuration written to .config
> #
> +
> [ -f 
> /home/ferdy/Datos/Proyectos/Lets/AT91SAM9260/ltibfromscratch/ltib/config/platform/at91sam9260/Lets-at91sam9260ek_config
>  ]
> + cp
> -f ./.config 
> /home/ferdy/Datos/Proyectos/Lets/AT91SAM9260/ltibfromscratch/ltib/config/platform/at91sam9260/Lets-at91sam9260ek_config.dev
> + [ -n . ]
> + rm -f .config
> + [ %{kernel_series} = 2.4 ]
> + make ARCH=arm CROSS_COMPILE= HOSTCC=/usr/bin/gcc -B/usr/bin// zImage
> scripts/kconfig/conf -s arch/arm/Kconfig
> ***
> *** You have not yet configured your kernel!
> *** (missing kernel .config file)
> ***
> *** Please run some configurator (e.g. "make oldconfig" or
> *** "make menuconfig" or "make xconfig").
> ***
> make[3]: *** [silentoldconfig] Error 1
> make[2]: *** [silentoldconfig] Error 2
>   CHK     include/linux/version.h
> make[1]: *** No rule to make target `include/config/auto.conf', needed
> by `include/asm-arm/.arch'.  Stop.
> make: *** [sub-make] Error 2
> error: Bad exit status
> from 
> /home/ferdy/Datos/Proyectos/Lets/AT91SAM9260/ltibfromscratch/ltib/tmp/rpm-tmp.99580
>  (%build)
> 
> 
> RPM build errors:
>     Bad exit status
> from 
> /home/ferdy/Datos/Proyectos/Lets/AT91SAM9260/ltibfromscratch/ltib/tmp/rpm-tmp.99580
>  (%build)
> Build time for kernel26-dir-build: 15 seconds
> 
> Failed building kernel26-dir-build
> 
> 
> f_buildrpms() returned an error, exiting
> traceback:
>  main:498
> 
> 
> Started: Wed Dec 10 16:13:58 2008
> Ended:   Wed Dec 10 16:14:15 2008
> Elapsed: 17 seconds
> 
> These packages failed to build:
> kernel26-dir-build
> Build Failed
> 
> Exiting on error or interrupt
> 
> ****************************************************************************************************************************************************
> 
> I have succesfully built that kernel tree with a previous version of
> ltib from a freescale CD, and with the latest from CVS i got this
> errors.
> The thing is that it complaints about the kernel not been configured,
> but i have tried to do it manually, and it fails the same way. 
> Can anybody give me a clue on what is going on, or what can i do??.
> Thanks a lot.
> Fernando.
> _______________________________________________
> LTIB home page: http://bitshrine.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib