RE: [Ltib] Building xorg-server; missing dependencies?

[Stuart Hughes]

Hi Alex,

If you go for option 2:

* checkout Savannah CVS
* do a cp -a old_bsp/config/platform/mpc5121ads savannah/config/platform/
* cd  savannah
* ./ltib
* select mpc5121ads
* let it build the default and check it works for you
* ./ltib -m config
* select the X11 stuff
* ./ltib
* let it build

The Savannah copy has nothing pre-built, so in effect you are starting from 
clean.

If you want your old BSP back to it's original pristine state you can do (in 
old_bsp):
./ltib --preconfig config/platform/mpc5121ads/defconfig

Regards, Stuart

On Mon, 2009-02-23 at 09:48 -0500, Alexandre Paradis wrote:
> The BSP is dated 2008-12-08, which seems to be the latest version they have.
> 
> I'll go for option #2.
> 
> Should I clean everything since I already added packages using the wrong 
> commands?
> 
> --
> Alex
> 
> 
> 
> -----Original Message-----
> From: Stuart Hughes [mailto:address@hidden 
> Sent: February 23, 2009 9:31 AM
> To: Alexandre Paradis
> Cc: address@hidden
> Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> 
> Hi Alex,
> 
> I guess you're using an older Freescale BSP?
> 
> If so your best bet is to try this:
> 
> 1/ Ask Freescale if they have a later BSP (the X11 stuff went in around
> Nov/Dec last year IIRC).
> 
> 2/ If not, use the Savannah LTIB CVS and copy the
> config/platform/mpc5121 you have into that copy.  I can't guarantee this
> will work, but at least you'll see the X11 selections.
> 
> Regards, Stuart
> 
> On Mon, 2009-02-23 at 08:54 -0500, Alexandre Paradis wrote:
> > Hi Stuart,
> > 
> > I can't find X11 in the package list.  Would I need to update ltib for them 
> > to show up?
> > 
> > Thanks,
> > 
> > --
> > Alex
> > 
> > 
> > 
> > -----Original Message-----
> > From: Stuart Hughes [mailto:address@hidden 
> > Sent: February 23, 2009 3:52 AM
> > To: Alexandre Paradis
> > Cc: address@hidden
> > Subject: Re: [Ltib] Building xorg-server; missing dependencies?
> > 
> > Hi Alex,
> > 
> > That's the wrong way to add packages.  Run:
> > 
> > $ ./ltib -m config
> > 
> > Select:
> > 
> >     X11  --->
> >     Install X11 (X.Org 7.3)  ---> 
> > 
> > And all the packages needed will be turned on.  You probably want to
> > also select some kind of window manager (enlightenment maybe).  Once
> > done, save an exit then run:
> > 
> > $ ./ltib
> > 
> > NOTE: ./ltib -p <pkg> is normally only used if you're developing a
> > single package.  See the FAQ.
> > 
> > Regards, Stuart
> > 
> > On Fri, 2009-02-20 at 15:45 -0500, Alexandre Paradis wrote:
> > > Hi,
> > > 
> > > I need to build the xorg-server package, but I seem to be missing some
> > > needed packages. 
> > > 
> > > I'm currently using LTIB from a Freescale BSP for the MPC5121:
> > > 
> > >   address@hidden
> > > ~/ltib/ltib-mpc5121ads-20081208/config/userspace $ cat
> > > ../../RELEASE_INFO
> > >   Release date = Fri Feb 20 20:20:58 2009 UTC
> > >   Release user = alex
> > >   Release host = dev-station
> > >   Release dir  = /home/alex/ltib/ltib-mpc5121ads-20081208
> > >   CVS wtag     = none
> > >   CVS tag      = none
> > >   Release tag  = none
> > >   App version  = 8.1.2
> > >   CVS version  = 1.421.4.1
> > >   git version  = none
> > > 
> > > I successfully added the some dependent packages using the following
> > > commands:
> > > 
> > >   ./ltib -p pixman.spec
> > >   ./ltib -p randrproto.spec
> > >   ./ltib -p renderproto.spec
> > >   ./ltib -p fixesproto.spec
> > >   ./ltib -p damageproto.spec
> > >   ./ltib -p xcmiscproto.spec
> > >   ./ltib -p extproto.spec
> > >   ./ltib -p xproto.spec
> > >   ./ltib -p xtrans.spec
> > >   ./ltib -p scrnsaverproto.spec
> > >   ./ltib -p bigreqsproto.spec
> > >   ./ltib -p resourceproto.spec
> > >   ./ltib -p fontsproto.spec
> > >   ./ltib -p inputproto.spec
> > >   ./ltib -p kbproto.spec
> > >   ./ltib -p videoproto.spec
> > >   ./ltib -p compositeproto.spec
> > >   ./ltib -p recordproto.spec
> > >   ./ltib -p resourceproto.spec
> > > 
> > > However.. I'm still missing a couple of packages which I can't seem to
> > > find on the GPP, mainly 'xkbfile', 'xfont', 'xau' and 'fontenc'.
> > > 
> > > Where can I find these? Do I need to get them from a source tarball, and
> > > create my own package along with a .spec file?
> > > 
> > > Any help is greatly appreciated.
> > > 
> > > Thanks!
> > > 
> > > --
> > > Alexandre Paradis
> > > 
> > > Alexandre Paradis, Technology Architect / Architecte technologique
> > > 
> > > bluberi gaming technologies inc.
> > > Drummondville, Quebec  Canada
> > > 819.475.5155 (telephone) 819.475.5156 (fax) bluberi.com
> > >  
> > > --------------------------------------------------------------------------
> > > This e-mail and any attachments transmitted with it are personal, 
> > > privileged and confidential and solely for the use of the individual to 
> > > whom they are addressed and intended. If you have received this e-mail in 
> > > error, please notify the sender by return e-mail. If you are not the 
> > > intended recipient or if you believe that you are not, you are hereby 
> > > notified that the dissemination, distribution, plagiarism or copying of 
> > > this e-mail and attachments transmitted with it is strictly prohibited. 
> > > NOTICE: We have taken reasonable precautions to prevent viruses from 
> > > being present in this e-mail. We do not accept responsibility for any 
> > > loss or damage arising from the use of this e-mail or attachments.
> > >  
> > > Ce courriel et les pièces jointes s’y rattachant sont de nature 
> > > personnelle, privilégiée et confidentielle et pour l’usage exclusif du 
> > > destinataire à qui ils sont adressés et destinés. Si vous avez reçu ce 
> > > courriel par erreur, veuillez s’il vous plaît le renvoyer à l’expéditeur. 
> > > Si vous n’êtes pas le bon destinataire ou si vous croyez ne pas l’être, 
> > > nous vous informons immédiatement que la publication, distribution, 
> > > diffusion, copie ou plagiat de ce courriel et de ses pièces jointes sont 
> > > strictement interdits. AVERTISSEMENT : Nous avons pris des mesures 
> > > raisonnables afin de prévenir toute propagation de virus par le biais de 
> > > ce courriel. Nous n’accepterons donc aucune responsabilité pour des 
> > > dommages ou pertes provenant de l’utilisation de ce courriel ou de ses 
> > > pièces jointes.
> > > --------------------------------------------------------------------------
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > LTIB home page: http://bitshrine.org
> > > 
> > > Ltib mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > 
> > 
>