Re: [Ltib] CVS broke my ltib? Or did it?

[Stuart Hughes]

Hi Bob,

There's 2 ways that can happen:

1/ Freescale decide to merge it out.
2/ Someone downloads the ISO and merges it to Savannah.

I don't have the bandwidth to do #2 right now.  If you have the ISO
maybe it's something you could look at doing (all that's needed is the
config/platform/_target_ and spec files for the kernel/u-boot).  Quite
possible the referenced content is already on bitshrine.org (this is
more automated).  If not, please send email to Freescale and ask them to
push this out to Savannah.

BTW: which platform is this, that is what's the name of the ISO image?

Regards, Stuart

On Fri, 2009-03-20 at 12:33 -0400, Robert S. Grimes wrote:
> Hi Stuart,
> 
> Yes, that fixed it just fine - thanks.
> 
> By the way, one of the problems I was having with microwindows is the
> framebuffer in the linux-v2.6.22-uc1, which does not support 320x240
> LCD display resolution - it only supports 240x320.  The newer
> linux-2.6.26-uc0 kernel, which is in one of the Freescale ISO ltibs,
> does support 320x240.  Any idea when that'll work its way into CVS?
> 
> Cheers,
> -Bob
> Robert S. Grimes
> 
> RSG Associates
> Embedded Systems and Software Development
> for Military, Aerospace, Industry - and beyond!
> 617.697.8579
> www.rsgassoc.com
> 
> email message attachment (Message 56.eml)
> On Fri, 2009-03-20 at 12:33 -0400, Robert S. Grimes wrote:
> > Thanks, Stuart - I'll try this tonight!
> > 
> > Bob
> > 
> > Sent from my Verizon Wireless BlackBerry
> > 
> > -----Original Message-----
> > From: Stuart Hughes <address@hidden>
> > 
> > Date: Thu, 19 Mar 2009 14:05:42 
> > To: <address@hidden>
> > Cc: <address@hidden>
> > Subject: Re: [Ltib] CVS broke my ltib?  Or did it?
> > 
> > 
> > Hi Robert,
> > 
> > I've checked in an update to CVS that will fix this.  To use this do:
> > 
> > $ cvs up
> > $ ./ltib -c
> > 
> > This will re-read the main.lkc file and compute the right kernel target
> > to build.
> > 
> > Here's the details:
> > 
> > * The kconfig warnings from the kernel can be ignored, they will be
> > fixed in later kernels: http://lkml.org/lkml/2007/5/19/221
> > 
> > * The problem that cause the build failure was happening as
> > kernel-common.tmpl has been updated to build uImage for m68knommu as a
> > default now.  For this platform there was no override placed in main.lkc
> > to correctly build for the BSP.  I've updated
> > config/platform/m532xevb/main.lkc
> > 
> > @@ -143,6 +138,17 @@
> >      default "kernel-2.6.22-uc1" if KERNEL3
> >      default "kernel26-dir-build"  if KERNEL_DIR_BUILD
> > 
> > +# if later someone adds u-boot kernels, then
> > +# add entries for those kernels before the defaults
> > +# for SYSCFG_KTARG and SYSCFG_BOOT_KERNEL
> > +config SYSCFG_KTARG
> > +    string
> > +    default "vmlinux"
> > +
> > +config SYSCFG_BOOT_KERNEL
> > +    string
> > +    default "vmlinux"
> > +
> >  source ../../userspace/kernel_dir_build.lkc
> > 
> > Regards, Stuart
> > 
> > On Thu, 2009-03-19 at 10:26 +0000, Stuart Hughes wrote:
> > > Hi Robert,
> > > 
> > > I've just merged the latest to Savannah.  If that platform's defconfig
> > > gets updated, it will update your copy and possibly that's why you had
> > > problems (initially).
> > > 
> > > I'll see if I can figure out what's wrong with a clean check-out.
> > > 
> > > Regards, Stuart
> > > 
> > > On Wed, 2009-03-18 at 21:42 -0400, Robert S. Grimes wrote:
> > > > Hi,
> > > > 
> > > > I did a CVS update today, and now I cannot get ltib to run.  Even after
> > > > a "./ltib -m distclean", running "./ltib -c" fails.  Here is the tail of
> > > > the console output:
> > > > 
> > > >         ...
> > > >         #
> > > >         # configuration written to .config
> > > >         #
> > > >         +
> > > >         [ -f 
> > > > /home/rsg/ltib/config/platform/m532xevb/linux-2.6.22.config ]
> > > >         + diff
> > > >         -q ./.config 
> > > > /home/rsg/ltib/config/platform/m532xevb/linux-2.6.22.config
> > > >         Files ./.config
> > > >         and /home/rsg/ltib/config/platform/m532xevb/linux-2.6.22.config
> > > >         differ
> > > >         + cp
> > > >         -f ./.config 
> > > > /home/rsg/ltib/config/platform/m532xevb/linux-2.6.22.config.dev
> > > >         + [ -n  ]
> > > >         + [ %{kernel_series} = 2.4 ]
> > > >         + make ARCH=m68knommu HOSTCC=ccache /usr/bin/gcc -B/usr/bin/
> > > >         uImage
> > > >         scripts/kconfig/conf -s arch/m68knommu/Kconfig
> > > >         drivers/macintosh/Kconfig:116:warning: 'select' used by config
> > > >         symbol 'PMAC_APM_EMU' refers to undefined symbol 'APM_EMULATION'
> > > >         make: *** No rule to make target `uImage'.  Stop.
> > > >         error: Bad exit status from /home/rsg/ltib/tmp/rpm-tmp.35223 (%
> > > >         build)
> > > >         
> > > >         
> > > >         RPM build errors:
> > > >             Bad exit status from /home/rsg/ltib/tmp/rpm-tmp.35223 (%
> > > >         build)
> > > >         Build time for kernel-2.6.22-uc1: 9 seconds
> > > >         
> > > >         Failed building kernel-2.6.22-uc1
> > > >         
> > > >         
> > > >         f_buildrpms() returned an error, exiting
> > > >         traceback:
> > > >          main:557
> > > >         
> > > >         
> > > >         Started: Wed Mar 18 21:37:43 2009
> > > >         Ended:   Wed Mar 18 21:38:45 2009
> > > >         Elapsed: 62 seconds
> > > >         
> > > >         These packages failed to build:
> > > >         kernel-2.6.22-uc1 
> > > >         
> > > >         Build Failed
> > > >         
> > > >         $
> > > >         
> > > > Any ideas what is broken, and how I broke it?
> > > > 
> > > > Thanks,
> > > > -Bob
> > > > 
> > > > 
> > > > 
> > > > 
> > > > _______________________________________________
> > > > LTIB home page: http://bitshrine.org
> > > > 
> > > > Ltib mailing list
> > > > address@hidden
> > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > > 
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > LTIB home page: http://bitshrine.org
> > > 
> > > Ltib mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > 
> > 
> > 
> > 
> > _______________________________________________
> > LTIB home page: http://bitshrine.org
> > 
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
> > _______________________________________________
> > LTIB home page: http://bitshrine.org
> > 
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
> _______________________________________________
> LTIB home page: http://bitshrine.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib