Re: [Ltib] CVS broke my ltib? Or did it?

[Stuart Hughes]

Hi Bob,

Give it a try and if you get stuck send email.  It's easy once you know
how, it's just getting familiar with how it fits together that you may
need help with.

Regards, Stuart

On Fri, 2009-03-20 at 14:53 -0400, Robert S. Grimes wrote:
> Hi Stuart,
> 
> Thanks for the info.  I don't have access to my dev machine right now,
> and I don't remember exactly what it was.  The link on Freescale's
> site referred to the mcf532x, but the ISO really supports both the
> mcf532x and mcf537x - apparently there's been effort to merge those
> two.
> 
> I will look into doing it myself next week, if I can figure out what
> to do.  I'm guessing it is pretty easy for someone experienced like
> yourself, but I don't know how to do that myself.  But, given that I
> expect it would be good for me to learn, I'm happy to at least look at
> it, and try my luck.
> 
> Have a great weekend!
> -Bob
> 
> ---- Original message ----
>         
>         Date: Fri, 20 Mar 2009 17:31:45 +0000
>         From: Stuart Hughes <address@hidden>
>         Subject: Re: [Ltib] CVS broke my ltib?  Or did it?
>         >Hi Bob,
>         >
>         >There's 2 ways that can happen:
>         >
>         >1/ Freescale decide to merge it out.
>         >2/ Someone downloads the ISO and merges it to Savannah.
>         >
>         >I don't have the bandwidth to do #2 right now. If you have
>         the ISO
>         >maybe it's something you could look at doing (all that's
>         needed is the
>         >config/platform/_target_ and spec files for the
>         kernel/u-boot). Quite
>         >possible the referenced content is already on bitshrine.org
>         (this is
>         >more automated). If not, please send email to Freescale and
>         ask them to
>         >push this out to Savannah.
>         >
>         >BTW: which platform is this, that is what's the name of the
>         ISO image?
>         >
>         >Regards, Stuart
>         >
>         >On Fri, 2009-03-20 at 12:33 -0400, Robert S. Grimes wrote:
>         >> Hi Stuart,
>         >> 
>         >> Yes, that fixed it just fine - thanks.
>         >> 
>         >> By the way, one of the problems I was having with
>         microwindows is the
>         >> framebuffer in the linux-v2.6.22-uc1, which does not
>         support 320x240
>         >> LCD display resolution - it only supports 240x320. The
>         newer
>         >> linux-2.6.26-uc0 kernel, which is in one of the Freescale
>         ISO ltibs,
>         >> does support 320x240. Any idea when that'll work its way
>         into CVS?
>         >> 
>         >> Cheers,
>         >> -Bob
>         >> Robert S. Grimes
>         >> 
>         >> RSG Associates
>         >> Embedded Systems and Software Development
>         >> for Military, Aerospace, Industry - and beyond!
>         >> 617.697.8579
>         >> www.rsgassoc.com
>         >> 
>         >> email message attachment (Message 56.eml)
>         >> On Fri, 2009-03-20 at 12:33 -0400, Robert S. Grimes wrote:
>         >> > Thanks, Stuart - I'll try this tonight!
>         >> > 
>         >> > Bob
>         >> > 
>         >> > Sent from my Verizon Wireless BlackBerry
>         >> > 
>         >> > -----Original Message-----
>         >> > From: Stuart Hughes <address@hidden>
>         >> > 
>         >> > Date: Thu, 19 Mar 2009 14:05:42 
>         >> > To: <address@hidden>
>         >> > Cc: <address@hidden>
>         >> > Subject: Re: [Ltib] CVS broke my ltib? Or did it?
>         >> > 
>         >> > 
>         >> > Hi Robert,
>         >> > 
>         >> > I've checked in an update to CVS that will fix this. To
>         use this do:
>         >> > 
>         >> > $ cvs up
>         >> > $ ./ltib -c
>         >> > 
>         >> > This will re-read the main.lkc file and compute the right
>         kernel target
>         >> > to build.
>         >> > 
>         >> > Here's the details:
>         >> > 
>         >> > * The kconfig warnings from the kernel can be ignored,
>         they will be
>         >> > fixed in later kernels:
>         http://lkml.org/lkml/2007/5/19/221
>         >> > 
>         >> > * The problem that cause the build failure was happening
>         as
>         >> > kernel-common.tmpl has been updated to build uImage for
>         m68knommu as a
>         >> > default now. For this platform there was no override
>         placed in main.lkc
>         >> > to correctly build for the BSP. I've updated
>         >> > config/platform/m532xevb/main.lkc
>         >> > 
>         >> > @@ -143,6 +138,17 @@
>         >> > default "kernel-2.6.22-uc1" if KERNEL3
>         >> > default "kernel26-dir-build" if KERNEL_DIR_BUILD
>         >> > 
>         >> > +# if later someone adds u-boot kernels, then
>         >> > +# add entries for those kernels before the defaults
>         >> > +# for SYSCFG_KTARG and SYSCFG_BOOT_KERNEL
>         >> > +config SYSCFG_KTARG
>         >> > + string
>         >> > + default "vmlinux"
>         >> > +
>         >> > +config SYSCFG_BOOT_KERNEL
>         >> > + string
>         >> > + default "vmlinux"
>         >> > +
>         >> > source ../../userspace/kernel_dir_build.lkc
>         >> > 
>         >> > Regards, Stuart
>         >> > 
>         >> > On Thu, 2009-03-19 at 10:26 +0000, Stuart Hughes wrote:
>         >> > > Hi Robert,
>         >> > > 
>         >> > > I've just merged the latest to Savannah. If that
>         platform's defconfig
>         >> > > gets updated, it will update your copy and possibly
>         that's why you had
>         >> > > problems (initially).
>         >> > > 
>         >> > > I'll see if I can figure out what's wrong with a clean
>         check-out.
>         >> > > 
>         >> > > Regards, Stuart
>         >> > > 
>         >> > > On Wed, 2009-03-18 at 21:42 -0400, Robert S. Grimes
>         wrote:
>         >> > > > Hi,
>         >> > > > 
>         >> > > > I did a CVS update today, and now I cannot get ltib
>         to run. Even after
>         >> > > > a "./ltib -m distclean", running "./ltib -c" fails.
>         Here is the tail of
>         >> > > > the console output:
>         >> > > > 
>         >> > > > ...
>         >> > > > #
>         >> > > > # configuration written to .config
>         >> > > > #
>         >> > > > +
>         >> > > >
>         [ -f /home/rsg/ltib/config/platform/m532xevb/linux-2.6.22.config ]
>         >> > > > + diff
>         >> > > >
>         -q ./.config 
> /home/rsg/ltib/config/platform/m532xevb/linux-2.6.22.config
>         >> > > > Files ./.config
>         >> > > >
>         and /home/rsg/ltib/config/platform/m532xevb/linux-2.6.22.config
>         >> > > > differ
>         >> > > > + cp
>         >> > > >
>         -f ./.config 
> /home/rsg/ltib/config/platform/m532xevb/linux-2.6.22.config.dev
>         >> > > > + [ -n ]
>         >> > > > + [ %{kernel_series} = 2.4 ]
>         >> > > > + make ARCH=m68knommu HOSTCC=ccache /usr/bin/gcc
>         -B/usr/bin/
>         >> > > > uImage
>         >> > > > scripts/kconfig/conf -s arch/m68knommu/Kconfig
>         >> > > > drivers/macintosh/Kconfig:116:warning: 'select' used
>         by config
>         >> > > > symbol 'PMAC_APM_EMU' refers to undefined symbol
>         'APM_EMULATION'
>         >> > > > make: *** No rule to make target `uImage'. Stop.
>         >> > > > error: Bad exit status
>         from /home/rsg/ltib/tmp/rpm-tmp.35223 (%
>         >> > > > build)
>         >> > > > 
>         >> > > > 
>         >> > > > RPM build errors:
>         >> > > > Bad exit status from /home/rsg/ltib/tmp/rpm-tmp.35223
>         (%
>         >> > > > build)
>         >> > > > Build time for kernel-2.6.22-uc1: 9 seconds
>         >> > > > 
>         >> > > > Failed building kernel-2.6.22-uc1
>         >> > > > 
>         >> > > > 
>         >> > > > f_buildrpms() returned an error, exiting
>         >> > > > traceback:
>         >> > > > main:557
>         >> > > > 
>         >> > > > 
>         >> > > > Started: Wed Mar 18 21:37:43 2009
>         >> > > > Ended: Wed Mar 18 21:38:45 2009
>         >> > > > Elapsed: 62 seconds
>         >> > > > 
>         >> > > > These packages failed to build:
>         >> > > > kernel-2.6.22-uc1 
>         >> > > > 
>         >> > > > Build Failed
>         >> > > > 
>         >> > > > $
>         >> > > > 
>         >> > > > Any ideas what is broken, and how I broke it?
>         >> > > > 
>         >> > > > Thanks,
>         >> > > > -Bob
>         >> > > > 
>         >> > > > 
>         >> > > > 
>         >> > > > 
>         >> > > > _______________________________________________
>         >> > > > LTIB home page: http://bitshrine.org
>         >> > > > 
>         >> > > > Ltib mailing list
>         >> > > > address@hidden
>         >> > > > http://lists.nongnu.org/mailman/listinfo/ltib
>         >> > > > 
>         >> > > 
>         >> > > 
>         >> > > 
>         >> > > _______________________________________________
>         >> > > LTIB home page: http://bitshrine.org
>         >> > > 
>         >> > > Ltib mailing list
>         >> > > address@hidden
>         >> > > http://lists.nongnu.org/mailman/listinfo/ltib
>         >> > > 
>         >> > 
>         >> > 
>         >> > 
>         >> > _______________________________________________
>         >> > LTIB home page: http://bitshrine.org
>         >> > 
>         >> > Ltib mailing list
>         >> > address@hidden
>         >> > http://lists.nongnu.org/mailman/listinfo/ltib
>         >> > _______________________________________________
>         >> > LTIB home page: http://bitshrine.org
>         >> > 
>         >> > Ltib mailing list
>         >> > address@hidden
>         >> > http://lists.nongnu.org/mailman/listinfo/ltib
>         >> _______________________________________________
>         >> LTIB home page: http://bitshrine.org
>         >> 
>         >> Ltib mailing list
>         >> address@hidden
>         >> http://lists.nongnu.org/mailman/listinfo/ltib
>         >
> 
> Robert S. Grimes
> 
> RSG Associates
> Embedded Systems and Software Development
> for Military, Aerospace, Industry - and beyond!
> 617.697.8579
> www.rsgassoc.com
>