Re: [Ltib] mpc8349itx cuImage build error

[Stuart Hughes]

Hi Aaron,

I've removed those changes and so it should correctly build uImage if 
cuImage boot is disabled.  BTW: this is not supported on the kernels 
that are in that platform (2.6.13.4 and 2.6.16), I've been using if for 
directory builds of later kernels/testing.  Also note that IMHO the 
2.6.16 kernels don't work reliably.

I will take a look at the release stuff.  BTW if you want a smaller 
image you should be able to use:

./ltib --preconfig config/platform/mpc8349itx/defconfig-min-fs

Although I've not tested that configuration.

Regards, Stuart


address@hidden wrote:
> Using the latest CVS code, I ran into an error trying to build the
> configuration config/platform/mpc8349itx/defconfig.  When building the
> kernel, it could not find the file
> arch/powerpc/boot/cuImage.mpc8349emitxgp, even though in my configuration
> I did not have a check in the selection
>
> [ ] use cuImage boot capability
>
> --------
> + cp ./arch/powerpc/boot/cuImage.mpc8349emitxgp
> /var/backup/20091012-ltib/ltib/tmp/kernel//opt/freescale/rootfs/ppc/boot
> cp: cannot stat `./arch/powerpc/boot/cuImage.mpc8349emitxgp': No such file
> or directory
> error: Bad exit status from
> /var/backup/20091012-ltib/ltib/tmp/rpm-tmp.60716 (%install)
> --------
>
> In order to get around this, I had to comment out the lines
>
> #config SYSCFG_BOOT_KERNEL
> #    string
> #    default "arch/powerpc/boot/cuImage.mpc8349emitxgp"
>
> in the file config/platform/mpc8349itx/main.lkc
>
>
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib