Good evening,
I have been using LTIB for several weeks on a Debian 5.0 distro. This
morning, I started to install LTIB on a Fedora 11 freshly new distro. I
have been facing issues with rpm-fs build (this is built upon first LTIB
launch).
In fact, the script does not seem to be able to build rpm-fs because a
macro (%pfx) is missing. I have added to this request the tail of my
host_config.log
I remember that, when installing LTIB on the Debian 5.0 a few weeks ago,
I had faced the same issue but after several tries, this had been
successfully worked (at this time I had not understood why but I was
happy enough to go on).
Did someone meet the same issue? Until now, I have been stuck for
several hours with that issue. I tried to unsinstall/install rpm-build
once again but this does not have any effect. More globally, I would
like to understand what rpm-fs is used for.
Note: I am using the LTIB install provided by my iMX25 Freescale CD/ROM.
Thanks for you help.
Regards,
Franz
Processing: rpm-fs
====================
Build path taken because: build key set, no prebuilt rpm,
/usr/bin/rpmbuild --dbpath ///tmp/rpm-franz/rpmdb --target i686 --define
'_unpackaged_files_terminate_
build 0' --define '_target_cpu i686' --define '__strip strip' --define
'_topdir /tmp/rpm-franz' --define '_prefix /opt/freescale/ltib/usr'
--define '_tmppath /home/franz/ltib/tmp' --define '_rpmdir
/tmp/rpm-franz/RPMS' --define '_mandir
/opt/freescale/ltib/usr/share/man' --define '_sysconfdir
/opt/freescale/ltib/etc' --define '_localstatedir /var' -bb --clean
--rmsource /tmp/rpm-franz/SPECS/rpm-fs.spec
error: Macro %pfx has empty body
Building target platforms: i686
Building for target i686
Executing(%prep): /bin/sh -e /home/franz/ltib/tmp/rpm-tmp.h3e6vF
+ umask 022
+ cd /tmp/rpm-franz/BUILD
+ exit 0
Executing(%build): /bin/sh -e /home/franz/ltib/tmp/rpm-tmp.UwkWiC
+ umask 022
+ cd /tmp/rpm-franz/BUILD
+ exit 0
Executing(%install): /bin/sh -e /home/franz/ltib/tmp/rpm-tmp.Hkr07y
+ umask 022
+ cd /tmp/rpm-franz/BUILD
+ '[' /tmp/rpm-franz/BUILDROOT/rpm-fs-4.0.4-1.i386 '!=' / ']'
+ rm -rf /tmp/rpm-franz/BUILDROOT/rpm-fs-4.0.4-1.i386
++ dirname /tmp/rpm-franz/BUILDROOT/rpm-fs-4.0.4-1.i386
+ mkdir -p /tmp/rpm-franz/BUILDROOT
+ mkdir /tmp/rpm-franz/BUILDROOT/rpm-fs-4.0.4-1.i386
+ /usr/lib/rpm/check-buildroot
Processing files: rpm-fs-4.0.4-1.i686
error: File not found by glob:
/tmp/rpm-franz/BUILDROOT/rpm-fs-4.0.4-1.i386/opt/freescale/*
RPM build errors:
Macro %pfx has empty body
File not found by glob:
/tmp/rpm-franz/BUILDROOT/rpm-fs-4.0.4-1.i386/opt/freescale/*
Build time for rpm-fs: 0 seconds
Failed building rpm-fs
could not glob rpm in: /tmp/rpm-franz/RPMS/i686/rpm-fs-* at ./ltib line
2393.
traceback:
main::check_rpm_setup:2393
main::host_checks:1422
main:539
Started: Fri Oct 16 19:20:52 2009
Ended: Fri Oct 16 19:24:06 2009
Elapsed: 194 seconds
These packages failed to build:
rpm-fs
Build Failed
------------------------------------------------------------------------
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/ltib