Re: [Ltib] Building problems

[Stuart Hughes]

Hi Paolo,

You can probably avoid the dependency by de-selecting:
        [*]   Build gdb documentation
Using ./ltib -m config

Regards, Stuart


Rogério de Souza Moraes wrote:
> Hi Paolo,
>
> it is missing the epstopdf bin file in your system:
>
> make[4]: epstopdf: Command not found
>
> If you use ubuntu, try to install this package: texlive-extra-utils
>
> Regards,
>
> Rogerio
>
> 2009/11/19 Paolo Cremonese <address@hidden 
> <mailto:address@hidden>>
>
>     Hi ALL,
>     I get errors on building a target LPC3250 using an x11 profile.
>
>     this is the output:
>
>     make[4]: Entering directory
>     `/home/paolo/LPC3250/ltib/rpm/BUILD/gdb-6.6/etc'
>     make[4]: `standards.pdf' is up to date.
>     make[4]: Leaving directory
>     `/home/paolo/LPC3250/ltib/rpm/BUILD/gdb-6.6/etc'
>     make[4]: Entering directory
>     `/home/paolo/LPC3250/ltib/rpm/BUILD/gdb-6.6/etc'
>     rm -f configdev.pdf configbuild.pdf
>     epstopdf .././etc/configdev.ein -outfile=configdev.pdf
>     make[4]: epstopdf: Command not found
>     make[4]: *** [configure.pdf] Error 127
>     make[4]: Leaving directory
>     `/home/paolo/LPC3250/ltib/rpm/BUILD/gdb-6.6/etc'
>     make[3]: *** [pdf] Error 1
>     make[3]: Leaving directory
>     `/home/paolo/LPC3250/ltib/rpm/BUILD/gdb-6.6/etc'
>     make[2]: *** [pdf-etc] Error 1
>     make[2]: Leaving directory `/home/paolo/LPC3250/ltib/rpm/BUILD/gdb-6.6'
>     make[1]: *** [do-install-pdf] Error 2
>     make[1]: Leaving directory `/home/paolo/LPC3250/ltib/rpm/BUILD/gdb-6.6'
>     make: *** [install] Error 2
>     error: Bad exit status from /home/paolo/LPC3250/ltib/tmp/rpm-tmp.54285
>     (%install)
>
>
>     RPM build errors:
>        Bad exit status from /home/paolo/LPC3250/ltib/tmp/rpm-tmp.54285 (%
>     install)
>     Build time for gdb: 16 seconds
>
>     Failed building gdb
>
>
>     f_buildrpms() returned an error, exiting
>     traceback:
>      main:561
>
>
>     Started: Thu Nov 19 09:48:52 2009
>     Ended:   Thu Nov 19 09:51:45 2009
>     Elapsed: 173 seconds
>
>     These packages failed to build:
>     gdb
>
>     Build Failed
>
>     Exiting on error or interrupt
>
>
>     Any suggestion?
>     Thanks in advance,
>     Paolo
>
>
>
>     _______________________________________________
>     LTIB home page: http://ltib.org
>
>     Ltib mailing list
>     address@hidden <mailto:address@hidden>
>     http://lists.nongnu.org/mailman/listinfo/ltib
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib