I think I have found all the 'custom' LTIB files for my target.
The latest LTIB from Savannah configures with no errors. Host-side config is good.
When LTIB runs, u-boot gets downloaded, patched, compiled OK. When it gets to the kernel, it tries to download a tar file from the GPP.
The problem is that the guy who set this all up got the kernel from Pengutronix. Which file in LTIB is directing the tool to download the kernel tar file? How can I trick LTIB into using a custom kernel?
Thanks!
.
ERROR
Processing: kernel-2.6.26-m9000
=================================
Build path taken because: no prebuilt rpm,
Testing network connectivity for gpp
OK GPP: is available
Try linux-2.6.26.3.tar.bz2.md5 from the GPP
http://bitshrine.org/gpp/linux-2.6.26.3.tar.bz2.md5:
13:55:49 ERROR 404: Not Found.
Try linux-2.6.26.3.tar.bz2 from the GPP
http://bitshrine.org/gpp/linux-2.6.26.3.tar.bz2:
13:55:50 ERROR 404: Not Found.
Can't get: linux-2.6.26.3.tar.bz2 at ./ltib line 802.
These seem to be the 'custom' files for my target
patches
|-- ltib
| |-- config
| | |-- platform
| | | `-- mpc5200
| | | |-- busybox.config
| | | |-- defconfig
| | | |-- linux-2.6.26-m9000.config
| | | `-- main.lkc
| | `-- userspace
| | `-- packages.lkc
| |-- dist
| | `-- lfs-5.1
| | |-- common
| | | `-- pkg_map
| | |-- kernel
| | | |-- kernel-2.6.26-m9000.spec.in
| | | `-- kernel-common.tmpl
| | |-- poco
| | | `-- poco.spec
| | `-- u-boot
| | `-- u-boot-1.3.3-m9000.spec
| `-- rootfs
| `-- sbin
| `-- hotplug
`-- opt
`-- ltib
`-- pkgs
|-- drivers-i2c-chips-eeprom-add_write_support.patch
|-- kernel-2.6.26-m9000.patch
|-- mpc5200-add-ATA-DMA.patch
|-- mpc5200-add-pscuart-mctrl.patch
|-- mpc5200-dont_touch_xlb_pipelining.patch
|-- poco-1.3.3-dynamicanyholder.patch
|-- poco-1.3.3_datetimeformatter.patch
`-- u-boot-1.3.3-m9000.patch