The host side is all fine. The problem is with the target compilation of mtd-utils.
But lzo is not in the list anywhere. It is also not in the list in my original installation. Maybe something has changed since it was first done.
How should I find the right spec file? (I don't know how all the spec files got there in the first place.)
----- Original Message -----
From: "Stuart Hughes" <address@hidden>
To: address@hidden
Cc: address@hidden
Sent: Sunday, April 11, 2010 6:40:45 AM GMT -05:00 US/Canada Eastern
Subject: Re: [Ltib] Trick LTIB into using custom Kernel
That header comes from lzo, it should only be needed when building for
the target, for the host it should use an older version of mtd-utils
that does not require this.
Is this a failure building the host support packages or has it got past
that stage? (e.g. come out of the redirecting to host_config.log)
If the failure is building the host support packages, then check that
the package that is being built is mtd-utils-20060302 (look in the
host_config.log for "Processing: mtd-utils-20060302"
If this is not set, make sure you have the file
config/platform/host/pkg_map which contains:
PKG_MTD_UTILS = mtd-utils-20060302
If this is a target package build failure, then make sure that lzo is
selected. It should be automatically if you have run ./ltib -m config
(or --configure). Also make sure zlib is selected. To make sure run:
./ltib -m config and make sure lzo and zlib are selected:
[ ] lrzsz
--- lzo
[ ] m4
....
[ ] zaptel
--- zlib
Note the --- indicates it's been selected by another package. If this
is not set, manually select with the space bar.
Regards, Stuart
address@hidden wrote:
> Beautiful!
>
> A lot is going well but now mtd-utils is failing because it can't find a
> header file. Anybody know what to do?
>
> gcc -I./include -DWITHOUT_XATTR -O2 -g -Wall -c -o compr_lzo.o
> compr_lzo.c -g -Wp,-MD,./.compr_lzo.c.dep
> compr_lzo.c:29:23: *error: lzo/lzo1x.h: No such file or directory*
> compr_lzo.c: In function 'jffs2_lzo_cmpr':
>
> Failed building mtd-utils
>
> (running on Ubuntu 9.10, latest LTIB from Savannah)
>
>
> ----- Original Message -----
> From: "Kevin Wells" <address@hidden>
> To: address@hidden, address@hidden
> Sent: Friday, April 9, 2010 2:32:16 PM GMT -05:00 US/Canada Eastern
> Subject: RE: [Ltib] Trick LTIB into using custom Kernel
>
>
>
> You can copy your custom files into the Local package pool and it
>
> won't attempt to download the files. The LPP is usually at:
>
> /opt/ltib/pkgs. It looks like you'll need to start by downloading
>
> the 2.6.26.3 Linux tarball from kernels.org and place it in you LPP.
>
> Also verify all your patches are in the LPP.
>
>
>
> thanks,
>
> Kevin
>
>
>
>
>
> *From:* address@hidden
> [mailto:address@hidden *On Behalf Of
> address@hidden
> *Sent:* Friday, April 09, 2010 11:25 AM
> *To:* address@hidden
> *Subject:* [Ltib] Trick LTIB into using custom Kernel
>
>
>
> I think I have found all the 'custom' LTIB files for my target.
>
>
>
> The latest LTIB from Savannah configures with no errors. Host-side
> config is good.
>
>
>
> When LTIB runs, u-boot gets downloaded, patched, compiled OK. When it
> gets to the kernel, it tries to download a tar file from the GPP.
>
>
>
> The problem is that the guy who set this all up got the kernel from
> Pengutronix. Which file in LTIB is directing the tool to download the
> kernel tar file? How can I trick LTIB into using a custom kernel?
>
>
>
> Thanks!
> .
>
> ERROR
>
> Processing: kernel-2.6.26-m9000
>
> =================================
>
> Build path taken because: no prebuilt rpm,
>
> Testing network connectivity for gpp
>
> OK GPP: is available
>
> Try linux-2.6.26.3.tar.bz2.md5 from the GPP
>
> http://bitshrine.org/gpp/linux-2.6.26.3.tar.bz2.md5:
>
> 13:55:49 ERROR 404: Not Found.
>
> Try linux-2.6.26.3.tar.bz2 from the GPP
>
> http://bitshrine.org/gpp/linux-2.6.26.3.tar.bz2:
>
> 13:55:50 ERROR 404: Not Found.
>
> Can't get: linux-2.6.26.3.tar.bz2 at ./ltib line 802.
>
>
>
>
>
> These seem to be the 'custom' files for my target
>
> patches
>
> |-- ltib
>
> | |-- config
>
> | | |-- platform
>
> | | | `-- mpc5200
>
> | | | |-- busybox.config
>
> | | | |-- defconfig
>
> | | | |-- linux-2.6.26-m9000.config
>
> | | | `-- main.lkc
>
> | | `-- userspace
>
> | | `-- packages.lkc
>
> | |-- dist
>
> | | `-- lfs-5.1
>
> | | |-- common
>
> | | | `-- pkg_map
>
> | | |-- kernel
>
> | | | |-- kernel-2.6.26-m9000.spec.in
>
> | | | `-- kernel-common.tmpl
>
> | | |-- poco
>
> | | | `-- poco.spec
>
> | | `-- u-boot
>
> | | `-- u-boot-1.3.3-m9000.spec
>
> | `-- rootfs
>
> | `-- sbin
>
> | `-- hotplug
>
> `-- opt
>
> `-- ltib
>
> `-- pkgs
>
> |-- drivers-i2c-chips-eeprom-add_write_support.patch
>
> |-- kernel-2.6.26-m9000.patch
>
> |-- mpc5200-add-ATA-DMA.patch
>
> |-- mpc5200-add-pscuart-mctrl.patch
>
> |-- mpc5200-dont_touch_xlb_pipelining.patch
>
> |-- poco-1.3.3-dynamicanyholder.patch
>
> |-- poco-1.3.3_datetimeformatter.patch
>
> `-- u-boot-1.3.3-m9000.patch
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib