Re: [Ltib] installation problem

[Stuart Hughes]

Hi Jan,

Thanks for replying.  That's an odd one, my guess was some sort of
network problem that missed the end of file or something (you could
binary compare the .bad against the one accepted to see).  The good news
really is that I hope it gives a little confidence that at least what is
downloaded for building is checked.

Regards, Stuart

Jan Wilmans wrote:
> Stuart, Peter, thanks to you both for your swift replys.
> 
> (stuart, sorry about the duplicate private email, I though it would be
> prudent to post this reply to the mailinglist, but i forgot to incude in
> that message the first time)
> 
> Very strange, I looked at the .bad file:
> 
> address@hidden:/workspace/work/
> agilent/ltib$ cat
> /workspace/work/agilent/ltib/pkgs/rpm-4.0.4-no-usr-local.patch.bad
> 20080410, Stuart Hughes <stuarth at freescale dot com>
> 
> This is a work around to the invalid state of some host distros
> (ones having /usr/local/lib/libbz2.a and not the equivalient .so)
> 
> --- rpm-4.0.4/configure 2008-04-10 05:49:06.000000000 -0500
> +++ rpm-4.0.4.modified/configure        2008-04-10 05:41:43.000000000 -0500
> @@ -7580,7 +7580,7 @@
> 
>  dirs=$prefix
>  if test "$cross_compiling" != "yes"; then
> -  dirs="$dirs /usr/local"
> +  dirs="$dirs"
>  fi
>  for dir in $dirs
>  do
> 
> It looks alright to me, re-trying the same action some hours later
> (which is: just starting ./ltib without any special options, as
> non-root) seems to work ok.
> 
> No idea what to problem was... thanks again for replying !
> 
> Greetings,
> 
> Jan
> 
> 
> On 20 July 2010 22:44, Stuart Hughes <address@hidden
> <mailto:address@hidden>> wrote:
> 
>     Hi Jan,
> 
>     Peter is right, the correct md5sum is b1a6071406c30d337c532d979c6439d1,
>     I just checked the site and the file is okay.
> 
>     Re-try, as if you had an aborted download, it could give the problem
>     (the bad file has already been renamed, so just retry).
> 
>     If that doesn't work, look at the .bad file and see what's in it, maybe
>     you're getting some error.
> 
>     Regards, Stuart
> 
>     Jan Wilmans wrote:
>     > Hi,
>     >
>     > I'm trying to install LTIB on Ubuntu 10.4 and i'm getting this
>     message:
>     >
>     > Try rpm-4.0.4-sysconfig-configure.patch from the GPP
>     > 2010-07-20 20:27:37
>     > URL:http://bitshrine.org/gpp//rpm-4.0.4-sysconfig-configure.patch
>     > [274/274] -> "rpm-4.0.4-sysconfig-configure.patch" [1]
>     > ERROR: md5sum mismatch, re-naming
>     > /workspace/work/agilent/ltib/pkgs/rpm-4.0.4-no-usr-local.patch to
>     > /workspace/work/agilent/ltib/pkgs/rpm-4.0.4-no-usr-local.patch.bad,
>     > please re-try
>     > Can't get: rpm-4.0.4-no-usr-local.patch at ./ltib line 786.
>     >
>     > Is this a ubuntu 10.4 specific problem, or am I missing something
>     here??
>     >
>     > Greetings,
>     >
>     > Jan
>     >
>     >
>     >
>     > address@hidden:/workspace/work/agilent/ltib$ ./ltib
>     >
>     > Installing host support packages.
>     >
>     > This only needs to be done once per host, but may take up to
>     > an hour to complete ...
>     >
>     > If an error occurs, a log file with the full output may be found in:
>     > /workspace/work/agilent/ltib/host_config.log
>     >
>     > Exiting on error or interrupt
>     > Please see >> /workspace/work/agilent/ltib/host_config.log for details
>     >
>     > address@hidden:/workspace/work/agilent/ltib$ cat
>     > /workspace/work/agilent/ltib/host_config.log
>     >
>     > Processing platform: host support
>     > ===================================
>     >
>     > Processing: rpm-fs
>     > ====================
>     > Build path taken because: no prebuilt rpm,
>     > Testing network connectivity
>     > OK GPP:
>     >
>     > Try rpm-4.0.4-sysconfig-configure.patch from the GPP
>     > 2010-07-20 20:27:37
>     > URL:http://bitshrine.org/gpp//rpm-4.0.4-sysconfig-configure.patch
>     > [274/274] -> "rpm-4.0.4-sysconfig-configure.patch" [1]
>     > ERROR: md5sum mismatch, re-naming
>     > /workspace/work/agilent/ltib/pkgs/rpm-4.0.4-no-usr-local.patch to
>     > /workspace/work/agilent/ltib/pkgs/rpm-4.0.4-no-usr-local.patch.bad,
>     > please re-try
>     > Can't get: rpm-4.0.4-no-usr-local.patch at ./ltib line 786.
>     > could not glob rpm in: /tmp/rpm-jan/RPMS/i686/rpm-fs-* at ./ltib
>     line 2393.
>     > traceback:
>     >  main::check_rpm_setup:2393
>     >   main::host_checks:1422
>     >    main:539
>     >
>     >
>     > Started: Tue Jul 20 20:27:31 2010
>     > Ended:   Tue Jul 20 20:27:37 2010
>     > Elapsed: 6 seconds
>     >
>     > These packages failed to build:
>     > rpm-fs
>     >
>     > Build Failed
>     >
>     > address@hidden:/workspace/work/agilent/ltib$
>     >
>     >
>     >
>     >
>     >
>     ------------------------------------------------------------------------
>     >
>     > _______________________________________________
>     > LTIB home page: http://ltib.org
>     >
>     > Ltib mailing list
>     > address@hidden <mailto:address@hidden>
>     > http://lists.nongnu.org/mailman/listinfo/ltib
> 
> 
> 
> 
> -- 
> Met vriendelijke groeten,