[Ltib] Re: Problem using 2.6.34 in EA 3250

[Vic]

Hi Kevin,

Question is, why only in 2.6.34? I'm fine compiling with 2.6.27.8. They are 
both in GPP, right? It has always been my issue from the start. it always 
get stuck in this file.  Apparently the url in the installer script 
URL:http://bitshrine.org/gpp/tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm.md5 
is no longer a valid location.
Is there any other place I can manually retrieve the file?

Thanks,
Vic




----- Original Message ----- 
From: "Kevin Wells" <address@hidden>
To: "Vic" <address@hidden>; <address@hidden>
Sent: Thursday, October 07, 2010 6:10 PM
Subject: RE: Problem using 2.6.34 in EA 3250


Hi Vic,

> ERROR: md5sum mismatch, re-naming /opt/ltib/pkgs/linux-2.6.34.tar.bz2 to
> /opt/ltib/pkgs/linux-2.6.34.tar.bz2.bad, please re-try

It looks like some of your files in the ./opt/ltib/pkgs
directory are corrupt or incomplete. When you see these
messages, you can try to delete the files in that directory
with the similar names and try again, but it might be an
indication your network is having problems fetching them.

Kevin


> -----Original Message-----
> From: Vic [mailto:address@hidden
> Sent: Thursday, October 07, 2010 8:33 PM
> To: address@hidden
> Cc: Kevin Wells
> Subject: Re: Problem using 2.6.34 in EA 3250
>
> Hi Kevin,
>
> I think there is basic problem with installing 2.6.34 from the error trace
> I'm getting. It keeps on referring to a mismatch as follows.
> ...
> Processing: kernel-2.6.34-lpc32xx
> ===================================
> Build path taken because: no prebuilt rpm,
> Testing network connectivity for gpp
> OK GPP: is available
> Try linux-2.6.34.tar.bz2 from the GPP
> ERROR: md5sum mismatch, re-naming /opt/ltib/pkgs/linux-2.6.34.tar.bz2 to
> /opt/ltib/pkgs/linux-2.6.34.tar.bz2.bad, please re-try
> Can't get: linux-2.6.34.tar.bz2 at ./ltib line 802.
>
>
> f_buildrpms() returned an error, exiting
> traceback:
>  main:567
>
>
> Started: Thu Oct  7 19:55:17 2010
> Ended:   Thu Oct  7 19:57:49 2010
> Elapsed: 152 seconds
>
> VERSION          : 10.1.1
> CVS_VERSION      : $Revision: 1.71 $ (Savannah)
> PLATFORM         : ea3250
> GNUTARCH         : arm
> TOOLCHAIN        : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm
> TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp
>
> These packages failed to build:
> kernel-2.6.34-lpc32xx
>
> Build Failed
>
> Exiting on error or interrupt
>
> Regards,
> Vic