ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Ltib] RE: Problem using 2.6.34 in EA 3250


From: Kevin Wells
Subject: [Ltib] RE: Problem using 2.6.34 in EA 3250
Date: Fri, 8 Oct 2010 17:55:51 +0200

Hi Vic,

The changes are only in 2.6.34 you need. Regarding the file below,
I just test downloaded it yesterday on a fresh system with a fresh
LTIB install. The GPP files all come from the same source.

Kevin


> -----Original Message-----
> From: Vic [mailto:address@hidden
> Sent: Thursday, October 07, 2010 9:50 PM
> To: Kevin Wells
> Cc: ltib mail
> Subject: Re: Problem using 2.6.34 in EA 3250
> 
> Hi Kevin,
> 
> Question is, why only in 2.6.34? I'm fine compiling with 2.6.27.8. They
> are
> both in GPP, right? It has always been my issue from the start. it always
> get stuck in this file.  Apparently the url in the installer script
> URL:http://bitshrine.org/gpp/tc-fsl-x86lnx-armeabi-nptl-4.1.2-
> 3.i386.rpm.md5
> is no longer a valid location.
> Is there any other place I can manually retrieve the file?
> 
> Thanks,
> Vic
> 
> 
> 
> 
> ----- Original Message -----
> From: "Kevin Wells" <address@hidden>
> To: "Vic" <address@hidden>; <address@hidden>
> Sent: Thursday, October 07, 2010 6:10 PM
> Subject: RE: Problem using 2.6.34 in EA 3250
> 
> 
> Hi Vic,
> 
> > ERROR: md5sum mismatch, re-naming /opt/ltib/pkgs/linux-2.6.34.tar.bz2 to
> > /opt/ltib/pkgs/linux-2.6.34.tar.bz2.bad, please re-try
> 
> It looks like some of your files in the ./opt/ltib/pkgs
> directory are corrupt or incomplete. When you see these
> messages, you can try to delete the files in that directory
> with the similar names and try again, but it might be an
> indication your network is having problems fetching them.
> 
> Kevin
> 
> 
> > -----Original Message-----
> > From: Vic [mailto:address@hidden
> > Sent: Thursday, October 07, 2010 8:33 PM
> > To: address@hidden
> > Cc: Kevin Wells
> > Subject: Re: Problem using 2.6.34 in EA 3250
> >
> > Hi Kevin,
> >
> > I think there is basic problem with installing 2.6.34 from the error
> trace
> > I'm getting. It keeps on referring to a mismatch as follows.
> > ...
> > Processing: kernel-2.6.34-lpc32xx
> > ===================================
> > Build path taken because: no prebuilt rpm,
> > Testing network connectivity for gpp
> > OK GPP: is available
> > Try linux-2.6.34.tar.bz2 from the GPP
> > ERROR: md5sum mismatch, re-naming /opt/ltib/pkgs/linux-2.6.34.tar.bz2 to
> > /opt/ltib/pkgs/linux-2.6.34.tar.bz2.bad, please re-try
> > Can't get: linux-2.6.34.tar.bz2 at ./ltib line 802.
> >
> >
> > f_buildrpms() returned an error, exiting
> > traceback:
> >  main:567
> >
> >
> > Started: Thu Oct  7 19:55:17 2010
> > Ended:   Thu Oct  7 19:57:49 2010
> > Elapsed: 152 seconds
> >
> > VERSION          : 10.1.1
> > CVS_VERSION      : $Revision: 1.71 $ (Savannah)
> > PLATFORM         : ea3250
> > GNUTARCH         : arm
> > TOOLCHAIN        : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm
> > TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp
> >
> > These packages failed to build:
> > kernel-2.6.34-lpc32xx
> >
> > Build Failed
> >
> > Exiting on error or interrupt
> >
> > Regards,
> > Vic
> >
> >
> >
> 
> 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]