Hi Kevin,
I used ./ltib -p xorg-server -m prep to install the x11 source, manually
put in the EA display patch to kmode.c, did a 'cvs up', deleted
/ltib/rpm/BUILD/linux-2.6.34. Had a successful ./ltib recompilation (but
with note 1), then rebooted the new uImage to ea3250 board and had trace
as Note 2.
Note 1:
...
Processing deployment operations
==================================
making filesystem image file
staging directory is /home/user/ltib/rootfs.tmp
find: `./.dillo': Permission denied
removing the boot directory and files ...
Note 2:
address@hidden /]#
address@hidden /]# xfbdev -mouse mouse &
address@hidden /]# -/bin/sh: xfbdev: not found
[1] + Done(127) xfbdev -mouse mouse
address@hidden /]# export DISPLAY=localhost:0.0
address@hidden /]# dillo &
address@hidden /]# paths: Cannot open file '//.dillo/dillorc'
paths: Using /usr/etc/dillo/dillorc
paths: Cannot open file '//.dillo/keysrc'
paths: Using /usr/etc/dillo/keysrc
dillo_dns_init: Here we go! (threaded)
Disabling cookies.
Can't open display "localhost:0.0"
[1] + Done(1) dillo
address@hidden /]#
Thanks,
Vic
----- Original Message -----
From: "Kevin Wells" <address@hidden>
To: "Vic" <address@hidden>; <address@hidden>
Sent: Monday, October 04, 2010 9:56 AM
Subject: RE: Install Dillo Problem
Hi Vic,
You'll need to do a 'cvs up' in your ltib directory to get
the changes. You should also rename or delete the
linux-2.6.34 directory in ./rpm/BUILD so the changes will
be correctly installed.
The easiest way to install the X11 changes is to install the
Xorg-server source and then manually apply the changes to
the file.
Rebuild all and you should be ok. Install a USB mouse into
the USB host port, boot your board to Linux, and then....
Xfbdev -mouse mouse &
export DISPLAY=localhost:0.0
dillo &
It worked great over here, but the rendering has problems on
some pages with some large blank regions. You might be able
to get some tuning info from Dillo's website. The performance
was quite good.
Kevin
-----Original Message-----
From: Vic [mailto:address@hidden
Sent: Sunday, October 03, 2010 8:24 PM
To: address@hidden
Cc: Kevin Wells
Subject: Re: Install Dillo Problem
Hi Kevin,
How do I update the SVN code and install the X11 patch?
Thanks,
Vic