Re: [Ltib] Re: LPC3250 Linux

[Stuart Hughes]

Hi Pramod,

You do not (normally) build glibc under LTIB.  The normal process is to
use the components from the currently selected toolchain.

Please revert back to the standard build configuration and retry (use
the defaults to start off and get that to build).

Regards, Stuart

On 11/01/11 17:21, pramod k wrote:
> Dear Stuart,
> 
> With my LTIB i get following warrning while configure. What can be problem.
> 
> For my jamvm and classpath compilation i do not get libgio where can i
> find this file in ltib so that i can cross compile that and use.
> 
> when  = use glibc instead of from toolchain only following error occurs
> 
> checking installed Linux kernel header files... TOO OLD!
> configure: error: GNU libc requires kernel header files from
> Linux 2.0.10 or later to be installed before configuring.
> The kernel header files are found usually in /usr/include/asm and
> /usr/include/linux; make sure these directories use files from
> Linux 2.0.10 or later.  This check uses <linux/version.h>, so
> make sure that file was built correctly when installing the kernel header
> files.  To use kernel headers not from /usr/include/linux, use the
> configure option --with-headers.
> error: Bad exit status from /home/pramod/lpc3250/ltib/tmp/rpm-tmp.57318
> (%build)
> 
> 
> RPM build errors:
>     Bad exit status from /home/pramod/lpc3250/ltib/tmp/rpm-tmp.57318
> (%build)
> Build time for glibc: 15 seconds
> 
> Failed building glibc
> 
> 
> f_buildrpms() returned an error, exiting
> traceback:
>  main:567
> 
> 
> Regards,
> Pramod Kumthekar
> 
> + '[' -d ./include/asm/arch ']'
> + echo 'Don'\''t know how to copy asm headers for this kernel'
> Don't know how to copy asm headers for this kernel
> 
> 
> On Mon, Dec 13, 2010 at 3:03 PM, pramod k <address@hidden
> <mailto:address@hidden>> wrote:
> 
>     Dear Sir,
> 
>     We are using LPC3250 ARM9 and LTIB for building the Linux 2.6.27.8
> 
>     We have written some code to access GPIO and was working earlier with
>     opensuse 9.0
>     We now have fedora 11 32 bit 2.6.30.10-105.2.23.fc11.i686.PAE
> 
>     When we make the program we get following errors we are using GCC3.4.5
> 
>     #make -C /lib/modules/`uname -r`/build M=`pwd` modules
>     make -C /home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8 M=`pwd`
>     modules
>     make[1]: Entering directory
>     `/home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8'
>     CC [M] /home/shekhar/samsung_lcd/gpio/char.o
>     cc1: error: invalid option `64'
>     cc1: error: invalid option `no-red-zone'
>     cc1: error: invalid option `cmodel=kernel'
>     cc1: error: invalid option `accumulate-outgoing-args'
>     make[2]: *** [/home/shekhar/samsung_lcd/gpio/char.o] Error 1
>     make[1]: *** [_module_/home/shekhar/samsung_lcd/gpio] Error 2
>     make[1]: Leaving directory
>     `/home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8'
>     make: *** [all] Error 2
> 
>     What can be the problem?
> 
>     Regards,
>     Pramod Kumthekar
> 
> 
> 
> 
> -- 
> Pramod Kumthekar.
> Contact No: 9594393134
> Official ID : address@hidden <mailto:address@hidden>
> 
> 
> 
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib