Re: [Ltib] MCF5475 Toolchain

[Andreas Roth]

Hi again,

thank you for your advice so far.

Currently I am trying to extract the desired Toolchain from the latest
Freescale BSP. The problem I am having right now is that that older LTIB
within the BSP depends on a Package called "rpm-build". Do you have any
suggestions how to get that?


Regards, Andreas

Stuart Hughes schrieb:
> Hi Andreas,
> 
> I forget the details but the last merge out (2 years ago) broke the
> toolchain relation for this platform.
> 
> Probably the simplest thing would be to check out a CVS copy from before
> this last merge out and try and see if that configures a working toolchain.
> 
> The other option is to ask Freescale to point you at something working
> for that platform (on their site) or to merge out to public.
> 
> Regards, Stuart
> 
> On 18/04/11 15:59, Andreas Roth wrote:
>> Hello there,
>>
>> I guess I am going to ask the wrong question, but at this point I am
>> pretty much out of options.
>>
>> I intend to compile a Build for a MCF5475 with the latest Linux Kernel.
>> Unfortunately this targets config file does not even contain a single
>> Toolchain per default. I tried to modify the config file in order to use
>> the toolchains linked at the "Cobra 5475" Target, but these did not work
>> either. I get the attached error message as I run LTIB (used Kernel so
>> far is the MCF547X Default 2.6.24).
>>
>> So in order to solve my problem please tell me either where to get a
>> working toolchain for this target, or how to modify the existing
>> toolchain, or at least give my a hint into the right direction, so I can
>> do further research on my own.
>>
>> Best regards,
>>
>> Andreas Roth
>>
>>
>>
>> /+ cp -f ./.config
>> /home/tartaros/ltib/config/platform/mcf547x_8x/linux-2.6.x.config.dev/
>> /+ '[' -n '' ']'/
>> /+ '[' '%{kernel_series}' = 2.4 ']'/
>> /+ make ARCH=m68k 'HOSTCC=ccache /usr/bin/gcc -B/usr/bin//' uImage/
>> /make: m68k-linux-gnu-gcc: Command not found/
>> /scripts/kconfig/conf -s arch/m68k/Kconfig/
>> /make: m68k-linux-gnu-gcc: Command not found/
>> /make: *** No rule to make target `uImage'.  Stop./
>> /error: Bad exit status from /home/tartaros/ltib/tmp/rpm-tmp.49210 (%build)/
>>
>>
>> /RPM build errors:/
>> /    Bad exit status from /home/tartaros/ltib/tmp/rpm-tmp.49210 (%build)/
>> /Build time for kernel-2.6.24-m547x_8x: 26 seconds/
>>
>> /Failed building kernel-2.6.24-m547x_8x/
>>
>>
>> /f_buildrpms() returned an error, exiting/
>> /traceback:/
>> / main:567/
>>
>>
>> /Started: Mon Apr 18 16:44:42 2011/
>> /Ended:   Mon Apr 18 16:45:35 2011/
>> /Elapsed: 53 seconds/
>>
>> /VERSION          : 10.1.1/
>> /CVS_VERSION      : $Revision: 1.75 $ (Savannah)/
>> /PLATFORM         : mcf547x_8x/
>> /GNUTARCH         : m68k/
>> /TOOLCHAIN        :
>> mtwk-lnx-cfv4e-gcc-3.4.0-glibc-2.3.2-v4e-0.28-8.i686.rpm/
>> /TOOLCHAIN_CFLAGS : -mcfv4e/
>>
>> /These packages failed to build:/
>> /kernel-2.6.24-m547x_8x /
>>
>> /Build Failed/
>>
>> /Exiting on error or interrupt/
>> /address@hidden:~/ltib> /
>>
>>
>>
>> _______________________________________________
>> LTIB home page: http://ltib.org
>>
>> Ltib mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/ltib