Re: [lwip-users] netif setup for IPv6 traffic (static /128 address assignment)

[goldsimon]

I must say I've never tried. I have only tested slaac an link local addresses so far. At which point does it reject using your address?

Simon

Am 25. Juli 2018 21:32:03 MESZ schrieb josephjah <address@hidden>:

Thanks for responding. I've tried using netif_ip6_addr_set() per your
suggestion but while it sets the address correctly for the netif, it doesn't
seem to take me any closer to an operational state. I'm just not sure where
to find a good example to follow. Can you clarify "mixing responsibilities"?
Here's a snippet which might be closer to standard usage (but still exhibits
the same problem).

Am I doing something out of order? or does lwIP not support assigning a
static ipv6 address of this form?

Thanks.

static err_t netif_init(struct netif *netif)
{
	netif->hwaddr_len = 6;
	netif->name[0]    = 'l';
	netif->name[1]    = '0'+lwipInterfacesCount;
	netif->linkoutput = lwip_eth_tx;
	netif->output     = etharp_output;
	netif->output_ip6 = ethip6_output;
	netif->mtu        = MY_MTU;
	netif->flags      = NETIF_FLAG_BROADCAST 
		| NETIF_FLAG_ETHARP 
		| NETIF_FLAG_ETHERNET 
		| NETIF_FLAG_IGMP 
		| NETIF_FLAG_MLD6 
		| NETIF_FLAG_LINK_UP 
		| NETIF_FLAG_UP;
	_mac.copyTo(netif->hwaddr, netif->hwaddr_len);
	netif->hwaddr_len = sizeof(netif->hwaddr);
	return ERR_OK;
}

void setup(...) {
	static ip6_addr_t ipaddr;
	memcpy(&(ipaddr.addr), ip.rawIpData(), sizeof(ipaddr.addr));
	netif_add(&netif, NULL, NULL, NULL, NULL, netif_init, ethernet_input);	
	netif.state = this;
	s8_t idx = 1;
	netif_ip6_addr_set(&netif, 1, &ipaddr);
	netif_set_status_callback(&netif, netif_status_callback);
	netif_set_default(&netif);
	netif_set_up(&netif);
	netif_set_link_up(&netif);
}



--
Sent from: http://lwip.100.n7.nabble.com/lwip-users-f3.html


lwip-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/lwip-users