[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[lwip-users] MCU restart after receiving DHCP packet from Router
From: |
sandip patel |
Subject: |
[lwip-users] MCU restart after receiving DHCP packet from Router |
Date: |
Thu, 10 Oct 2019 12:39:00 -0700 (MST) |
Hi All,
I am using STM32F407 over Ethernet with LwIP stack. I have enabled DHCP to
get ip from router.
My issue is , in some specific network, i am facing issue of STM32F407 gets
reset after 4 sec of Ethernet cable plugged. This strange things happen
every time i plugged Ethernet cable.
I have checked log in Wire-Shark and found that STM32F407 gets reset after
DHCP packet received.
It is not a hardware issue, as with same board Ethernet is working perfectly
in other network, so it should be network related issue.
If anyone have any idea, Please help.
Thanks
--
Sent from: http://lwip.100.n7.nabble.com/lwip-users-f3.html
- [lwip-users] MCU restart after receiving DHCP packet from Router,
sandip patel <=