[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Link for XBee API in Session is incorrect

From: onefastdaddy
Subject: Re: [Paparazzi-devel] Link for XBee API in Session is incorrect
Date: Mon, 11 Aug 2014 18:21:51 -0700 (PDT)

Now this is interesting,
For the ground station I was using my FTDIUtil board and an XBee Module. 
Now I changed to one of those enclosed USB XBee modems used in the SUMO
bundle for the ground station and the symlink is now:
address@hidden:~/paparazzi-campaign2013$ sudo ls -lh /dev/paparazzi/
total 0
lrwxrwxrwx 1 root root 10 Aug 11 18:14 xbee -> ../ttyUSB0

So now I need to change the command line on the Data Link back again. 

This is interesting. There appears to be some logic going on with the
Session and the symlink that is created in /dev/paparazzi/xbee or serial for
the FTDI to USB serial connection. 

So if you use this XBee Modem: then the link is
"xbee". If you use this modem: XBP24-ASI-001 (revC) setup with API it
created a symlink named "serial". 


View this message in context:
Sent from the paparazzi-devel mailing list archive at

reply via email to

[Prev in Thread] Current Thread [Next in Thread]