[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Replace Voltage Regulator on Lisa/m.v2

From: zorigb
Subject: [Paparazzi-devel] Replace Voltage Regulator on Lisa/m.v2
Date: Wed, 15 Jul 2015 14:31:25 -0700 (MST)

I was testing my Lisa/M.V2 board and I accidentally burned it. I was using my
ESC to power the board through one of the servo pins.Everything was fine
until I smelt something burning and the board stopped working even though
the life led(green) is still on. I was shorting the GND and ADC1 pins on the
analog1 port in order to bind a spektrum receiver. I don't exactly know what
went wrong. Afterwards I checked the resistors on the board and some
resistors we're not working anymore. I think the voltage regulator was
damaged somehow and am looking for a way to replace it. Does anyone have
experience replacing the voltage regulator? Also if you have a schematic of
the board can you share it, it would be greatly helpful.

Thank you

View this message in context:
Sent from the paparazzi-devel mailing list archive at

reply via email to

[Prev in Thread] Current Thread [Next in Thread]