[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[patch 4/7] Remove next, prev, up node names from @node lines, to make s

From: blp
Subject: [patch 4/7] Remove next, prev, up node names from @node lines, to make structural changes to the manual easier. (These node names are not needed by makeinfo.)
Date: Sat, 02 Jun 2007 15:36:51 -0700
User-agent: quilt/0.45-1

Index: merge/doc/bugs.texi
--- merge.orig/doc/bugs.texi    2005-03-01 00:17:20.000000000 -0800
+++ merge/doc/bugs.texi 2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Bugs, Function Index, Not Implemented, Top
address@hidden Bugs
 @chapter Bugs
 PSPP does have bugs.  We do our best to fix them, but our limited
Index: merge/doc/command-index.texi
--- merge.orig/doc/command-index.texi   2004-10-30 03:14:05.000000000 -0700
+++ merge/doc/command-index.texi        2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Command Index, Concept Index, Function Index, Top
address@hidden Command Index
 @chapter Command Index
 @printindex vr
 @setfilename ignored
Index: merge/doc/concept-index.texi
--- merge.orig/doc/concept-index.texi   2006-04-03 13:17:23.000000000 -0700
+++ merge/doc/concept-index.texi        2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Concept Index, Configuration, Command Index, Top
address@hidden Concept Index
 @chapter Concept Index
 @printindex cp
 @setfilename ignored
Index: merge/doc/configuring.texi
--- merge.orig/doc/configuring.texi     2007-02-19 10:58:11.000000000 -0800
+++ merge/doc/configuring.texi  2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Configuration, Portable File Format, Concept Index, Top
address@hidden Configuration
 @appendix Configuring PSPP
 @cindex configuration
 @cindex PSPP, configuring
@@ -17,7 +17,7 @@
 * Miscellaneous configuring::   Even more configuration variables.
 @end menu
address@hidden File locations, Configuration techniques, Configuration, 
address@hidden File locations
 @section Locating configuration files
 PSPP searches each directory in the configuration file path for most
@@ -29,7 +29,7 @@
 @address@hidden specified on the command line has highest
address@hidden Configuration techniques, Configuration files, File locations, 
address@hidden Configuration techniques
 @section Configuration techniques
 There are many ways that PSPP can be configured.  These are
@@ -59,7 +59,7 @@
 Some of the above may not apply to a particular setting.
address@hidden Configuration files, Environment variables, Configuration 
techniques, Configuration
address@hidden Configuration files
 @section Configuration files
 Most configuration files have a common form:
@@ -113,7 +113,7 @@
 Blank lines, and lines that contain only white space, are ignored.
 @end itemize
address@hidden Environment variables, Output devices, Configuration files, 
address@hidden Environment variables
 @section Environment variables
 You may think the concept of environment variables is a fairly simple
@@ -126,7 +126,7 @@
 * Predefined variables::        A few variables are automatically defined.
 @end menu
address@hidden Environment substitutions, Predefined variables, Environment 
variables, Environment variables
address@hidden Environment substitutions
 @subsection Environment substitutions
 Much of the power of environment variables lies in the way that they may
@@ -154,7 +154,7 @@
 Undefined variables expand to a empty value.
address@hidden Predefined variables,  , Environment substitutions, Environment 
address@hidden Predefined variables
 @subsection Predefined environment variables
 There are two environment variables predefined for use in environment
@@ -175,7 +175,7 @@
 Nothing prevents these values from being overridden, although it's a
 good idea not to do so.
address@hidden Output devices, PostScript driver class, Environment variables, 
address@hidden Output devices
 @section Output devices
 Configuring output devices is the most complicated aspect of configuring
@@ -213,7 +213,7 @@
 * Tokenizing lines::            Dividing @file{devices} lines into tokens.
 @end menu
address@hidden Driver categories, Macro definitions, Output devices, Output 
address@hidden Driver categories
 @subsection Driver categories
 Drivers can be divided into categories.  Drivers are specified by their
@@ -258,7 +258,7 @@
 It is an error if the list is not empty when the end of @file{devices}
 is reached.
address@hidden Macro definitions, Device definitions, Driver categories, Output 
address@hidden Macro definitions
 @subsection Macro definitions
 Macro definitions take the form @samp{define @var{macroname}
@@ -306,7 +306,7 @@
 @end table
 @end itemize
address@hidden Device definitions, Dimensions, Macro definitions, Output devices
address@hidden Device definitions
 @subsection Driver definitions
 Driver definitions are the ultimate purpose of the @file{devices}
@@ -381,7 +381,7 @@
 Options are dependent on the driver.  See the driver descriptions for
address@hidden Dimensions, papersize, Device definitions, Output devices
address@hidden Dimensions
 @subsection Dimensions
 Quite often in configuration it is necessary to specify a length or a
@@ -444,7 +444,7 @@
 @end itemize
 @end itemize
address@hidden papersize, Distinguishing line types, Dimensions, Output devices
address@hidden papersize
 @subsection Paper sizes
 Output drivers usually deal with some sort of hardcopy media.  This
@@ -474,7 +474,7 @@
 search becomes paper name @var{paper-2} and the search through the file
address@hidden Distinguishing line types, Tokenizing lines, papersize, Output 
address@hidden Distinguishing line types
 @subsection How lines are divided into types
 The lines in @file{devices} are distinguished in the following manner:
@@ -504,7 +504,7 @@
 Otherwise, the line is ill-formed.
 @end enumerate
address@hidden Tokenizing lines,  , Distinguishing line types, Output devices
address@hidden Tokenizing lines
 @subsection How lines are divided into tokens
 Each driver definition line is run through a simple tokenizer.  This
@@ -571,7 +571,7 @@
 Tokens, outside of quoted strings, are delimited by white space or equals
address@hidden PostScript driver class, ASCII driver class, Output devices, 
address@hidden PostScript driver class
 @section The PostScript driver class
 The @code{postscript} driver class is used to produce output that is
@@ -655,7 +655,7 @@
 Sets the width of the lines used in tables.  Default: @code{0.5pt}.
 @end table
address@hidden ASCII driver class, HTML driver class, PostScript driver class, 
address@hidden ASCII driver class
 @section The ASCII driver class
 The ASCII driver class produces output that can be displayed on a
@@ -789,7 +789,7 @@
 you might pass the output.
 @end table
address@hidden HTML driver class, Miscellaneous configuring, ASCII driver 
class, Configuration
address@hidden HTML driver class
 @section The HTML driver class
 The @code{html} driver class is used to produce output for viewing in
@@ -812,7 +812,7 @@
 the chart number.  Default: @file{"pspp-#.png"}.
 @end table
address@hidden Miscellaneous configuring,, HTML driver class, Configuration
address@hidden Miscellaneous configuring
 @section Miscellaneous configuration
 The following environment variables can be used to further configure
Index: merge/doc/data-file-format.texi
--- merge.orig/doc/data-file-format.texi        2007-04-22 13:50:59.000000000 
+++ merge/doc/data-file-format.texi     2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Data File Format, q2c Input Format, Portable File Format, Top
address@hidden Data File Format
 @appendix Data File Format
 PSPP necessarily uses the same format for system files as do the
@@ -52,7 +52,7 @@
 * Data Record::                 
 @end menu
address@hidden File Header Record, Variable Record, Data File Format, Data File 
address@hidden File Header Record
 @section File Header Record
 The file header is always the first record in the file.
@@ -143,7 +143,7 @@
 length.  Set to zeros.
 @end table
address@hidden Variable Record, Value Label Record, File Header Record, Data 
File Format
address@hidden Variable Record
 @section Variable Record
 Immediately following the header must come the variable records.  There
@@ -318,7 +318,7 @@
 @end table
address@hidden Value Label Record, Value Label Variable Record, Variable 
Record, Data File Format
address@hidden Value Label Record
 @section Value Label Record
 Value label records must follow the variable records and must precede
@@ -344,7 +344,7 @@
 label.  The remainder of the field is the label itself.  The field is
 padded on the right to a multiple of 64 bits in length.
address@hidden Value Label Variable Record, Document Record, Value Label 
Record, Data File Format
address@hidden Value Label Variable Record
 @section Value Label Variable Record
 Every value label variable record must be immediately preceded by a
@@ -374,7 +374,7 @@
 to occupy multiple indexes.
 @end table
address@hidden Document Record, Machine int32 Info Record, Value Label Variable 
Record, Data File Format
address@hidden Document Record
 @section Document Record
 There must be no more than one document record per system file.
@@ -402,7 +402,7 @@
 Lines shorter than 80 characters are padded on the right with spaces.
 @end table
address@hidden Machine int32 Info Record, Machine flt64 Info Record, Document 
Record, Data File Format
address@hidden Machine int32 Info Record
 @section Machine @code{int32} Info Record
 There must be no more than one machine @code{int32} info record per
@@ -475,7 +475,7 @@
 Windows code page numbers are also valid.
 @end table
address@hidden Machine flt64 Info Record, Auxiliary Variable Parameter Record, 
Machine int32 Info Record, Data File Format
address@hidden Machine flt64 Info Record
 @section Machine @code{flt64} Info Record
 There must be no more than one machine @code{flt64} info record per
@@ -521,7 +521,7 @@
 The value used for LOWEST in missing values.
 @end table
address@hidden Auxiliary Variable Parameter Record, Long Variable Names Record, 
Machine flt64 Info Record, Data File Format
address@hidden Auxiliary Variable Parameter Record
 @section Auxiliary Variable Parameter Record
 There must be no more than one auxiliary variable parameter record per
@@ -608,7 +608,7 @@
address@hidden Long Variable Names Record, Very Long String Length Record, 
Auxiliary Variable Parameter Record,  Data File Format
address@hidden Long Variable Names Record
 @section Long Variable Names Record
 There must be no more than one long variable names record per
@@ -655,7 +655,7 @@
 The total length is @code{count} bytes.
 @end table
address@hidden Very Long String Length Record, Miscellaneous Informational 
Records, Long Variable Names Record, Data File Format
address@hidden Very Long String Length Record
 @comment  node-name,  next,  previous,  up
 @section Very Long String Length Record
@@ -707,7 +707,7 @@
address@hidden Miscellaneous Informational Records, Dictionary Termination 
Record, Very Long String Length Record, Data File Format
address@hidden Miscellaneous Informational Records
 @section Miscellaneous Informational Records
 Miscellaneous informational records must follow the variable records and
@@ -752,7 +752,7 @@
 @end table
address@hidden Dictionary Termination Record, Data Record, Miscellaneous 
Informational Records, Data File Format
address@hidden Dictionary Termination Record
 @section Dictionary Termination Record
 The dictionary termination record must follow all other records, except
@@ -775,7 +775,7 @@
 Ignored padding.  Should be set to 0.
 @end table
address@hidden Data Record,  , Dictionary Termination Record, Data File Format
address@hidden Data Record
 @section Data Record
 Data records must follow all other records in the data file.  There must
Index: merge/doc/data-io.texi
--- merge.orig/doc/data-io.texi 2006-12-19 07:18:45.000000000 -0800
+++ merge/doc/data-io.texi      2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Data Input and Output, System and Portable Files, Expressions, 
address@hidden Data Input and Output
 @chapter Data Input and Output
 @cindex input
 @cindex output
Index: merge/doc/data-selection.texi
--- merge.orig/doc/data-selection.texi  2006-05-14 09:14:24.000000000 -0700
+++ merge/doc/data-selection.texi       2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Data Selection, Conditionals and Looping, Data Manipulation, Top
address@hidden Data Selection
 @chapter Selecting data for analysis
 This chapter documents PSPP commands that temporarily or permanently
@@ -14,7 +14,7 @@
 * WEIGHT::                      Weight cases by a variable.
 @end menu
address@hidden FILTER, N OF CASES, Data Selection, Data Selection
address@hidden FILTER
 @section FILTER
 @vindex FILTER
@@ -146,7 +146,7 @@
 differing endianness or floating-point formats.  By default, the
 random number seed is based on the system time.
address@hidden SELECT IF, SPLIT FILE, SAMPLE, Data Selection
address@hidden SELECT IF
 @section SELECT IF
 @vindex SELECT IF
@@ -172,7 +172,7 @@
 (@pxref{TEMPORARY}), the @cmd{LAG} function may not be used
address@hidden SPLIT FILE, TEMPORARY, SELECT IF, Data Selection
address@hidden SPLIT FILE
 @section SPLIT FILE
 @vindex SPLIT FILE
@@ -205,7 +205,7 @@
 When @cmd{SPLIT FILE} is specified after @cmd{TEMPORARY}, it affects only
 the next procedure (@pxref{TEMPORARY}).
address@hidden TEMPORARY, WEIGHT, SPLIT FILE, Data Selection
address@hidden TEMPORARY
 @section TEMPORARY
 @vindex TEMPORARY
@@ -249,7 +249,7 @@
 10.5, 13, 15.  The data read by the first @cmd{DESCRIPTIVES} are 1, 2,
 5, 7.5, 10, 12.
address@hidden WEIGHT,  , TEMPORARY, Data Selection
address@hidden WEIGHT
 @section WEIGHT
 @vindex WEIGHT
Index: merge/doc/expressions.texi
--- merge.orig/doc/expressions.texi     2006-12-16 13:15:26.000000000 -0800
+++ merge/doc/expressions.texi  2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Expressions, Data Input and Output, Language, Top
address@hidden Expressions
 @chapter Mathematical Expressions
 @cindex expressions, mathematical
 @cindex mathematical expressions
Index: merge/doc/fdl.texi
--- merge.orig/doc/fdl.texi     2005-05-17 21:09:35.000000000 -0700
+++ merge/doc/fdl.texi  2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden GNU Free Documentation License, , q2c Input Format, Top
address@hidden GNU Free Documentation License
 @appendix GNU Free Documentation License
 @cindex FDL, GNU Free Documentation License
Index: merge/doc/files.texi
--- merge.orig/doc/files.texi   2007-05-31 22:51:09.000000000 -0700
+++ merge/doc/files.texi        2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden System and Portable Files, Variable Attributes, Data Input and 
Output, Top
address@hidden System and Portable Files
 @chapter System Files and Portable Files
 The commands in this chapter read, write, and examine system files and
@@ -400,7 +400,7 @@
 @xref{EXPORT}, for more information.
address@hidden XSAVE,  , XEXPORT, System and Portable Files
address@hidden XSAVE
 @section XSAVE
 @vindex XSAVE
Index: merge/doc/flow-control.texi
--- merge.orig/doc/flow-control.texi    2006-12-20 10:39:17.000000000 -0800
+++ merge/doc/flow-control.texi 2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Conditionals and Looping, Statistics, Data Selection, Top
address@hidden Conditionals and Looping
 @chapter Conditional and Looping Constructs
 @cindex conditionals
 @cindex loops
@@ -15,7 +15,7 @@
 * LOOP::                        Repeat a block of code.
 @end menu
address@hidden BREAK, DO IF, Conditionals and Looping, Conditionals and Looping
address@hidden BREAK
 @section BREAK
 @vindex BREAK
@@ -29,7 +29,7 @@
 @cmd{BREAK} is allowed only inside @address@hidden@cmd{END LOOP}.
 @xref{LOOP}, for more details.
address@hidden DO IF, DO REPEAT, BREAK, Conditionals and Looping
address@hidden DO IF
 @section DO IF
 @vindex DO IF
@@ -59,7 +59,7 @@
 (@pxref{TEMPORARY}), the @cmd{LAG} function may not be used
address@hidden DO REPEAT, LOOP, DO IF, Conditionals and Looping
address@hidden DO REPEAT
 @section DO REPEAT
 @vindex DO REPEAT
@@ -109,7 +109,7 @@
 are made are printed to the listing file, prefixed by a plus sign
address@hidden LOOP,  , DO REPEAT, Conditionals and Looping
address@hidden LOOP
 @section LOOP
 @vindex LOOP
Index: merge/doc/function-index.texi
--- merge.orig/doc/function-index.texi  2004-10-30 03:14:05.000000000 -0700
+++ merge/doc/function-index.texi       2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Function Index, Command Index, Bugs, Top
address@hidden Function Index
 @chapter Function Index
 @printindex fn
 @setfilename ignored
Index: merge/doc/installing.texi
--- merge.orig/doc/installing.texi      2006-04-03 13:17:23.000000000 -0700
+++ merge/doc/installing.texi   2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Installation, Configuration, Concept Index, Top
address@hidden Installation
 @appendix Installing PSPP
 @cindex installation
 @cindex PSPP, installing
Index: merge/doc/introduction.texi
--- merge.orig/doc/introduction.texi    2004-10-30 03:14:05.000000000 -0700
+++ merge/doc/introduction.texi 2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Introduction, License, Top, Top
address@hidden Introduction
 @chapter Introduction
 @cindex introduction
Index: merge/doc/invoking.texi
--- merge.orig/doc/invoking.texi        2006-09-18 17:35:00.000000000 -0700
+++ merge/doc/invoking.texi     2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Invocation, Language, License, Top
address@hidden Invocation
 @chapter Invoking PSPP
 @cindex invocation
 @cindex PSPP, invoking
@@ -25,7 +25,7 @@
 * Informational options::       Helpful information about PSPP.
 @end menu
address@hidden Non-option Arguments, Configuration Options, Invocation, 
address@hidden Non-option Arguments
 @section Non-option Arguments
 Syntax files and output device substitutions can be specified on
@@ -63,7 +63,7 @@
 typing its name.  You can include any options on the command line as
 usual.  PSPP entirely ignores any lines beginning with @samp{#!}.
address@hidden Configuration Options, Input and output options, Non-option 
Arguments, Invocation
address@hidden Configuration Options
 @section Configuration Options
 Configuration options are used to change PSPP's configuration for the
@@ -94,7 +94,7 @@
 option disables all devices besides those mentioned on the command line.
 @end table
address@hidden Input and output options, Language control options, 
Configuration Options, Invocation
address@hidden Input and output options
 @section Input and output options
 Input and output options affect how PSPP reads input and writes
@@ -139,7 +139,7 @@
 check} and similar scripts.
 @end table
address@hidden Language control options, Informational options, Input and 
output options, Invocation
address@hidden Language control options
 @section Language control options
 Language control options control how PSPP syntax files are parsed and
@@ -180,7 +180,7 @@
 HOST commands, as well as use of pipes as input and output files.
 @end table
address@hidden Informational options,  , Language control options, Invocation
address@hidden Informational options
 @section Informational options
 Informational options cause information about PSPP to be written to
Index: merge/doc/language.texi
--- merge.orig/doc/language.texi        2006-11-30 21:45:29.000000000 -0800
+++ merge/doc/language.texi     2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Language, Expressions, Invocation, Top
address@hidden Language
 @chapter The PSPP language
 @cindex language, PSPP
 @cindex PSPP, language
@@ -24,7 +24,7 @@
 * BNF::                         How command syntax is described.
 @end menu
address@hidden Tokens, Commands, Language, Language
address@hidden Tokens
 @section Tokens
 @cindex language, lexical analysis
 @cindex language, tokens
@@ -159,7 +159,7 @@
 the default setting is in effect.
 @end table
address@hidden Commands, Types of Commands, Tokens, Language
address@hidden Commands
 @section Forming commands of tokens
 @cindex PSPP, command structure
@@ -198,7 +198,7 @@
 which allows for visual indentation of a command without that command
 being considered part of the previous command.
address@hidden Types of Commands, Order of Commands, Commands, Language
address@hidden Types of Commands
 @section Types of Commands
 Commands in PSPP are divided roughly into six categories:
@@ -241,7 +241,7 @@
 active file (the data) to be read.
 @end table
address@hidden Order of Commands, Missing Observations, Types of Commands, 
address@hidden Order of Commands
 @section Order of Commands
 @cindex commands, ordering
 @cindex order of commands
@@ -339,7 +339,7 @@
 @end itemize
 @end table
address@hidden Missing Observations, Variables, Order of Commands, Language
address@hidden Missing Observations
 @section Handling missing observations
 @cindex missing values
 @cindex values, missing
@@ -369,7 +369,7 @@
 documentation on individual procedures for information on how they
 handle missing values.
address@hidden Variables, Files, Missing Observations, Language
address@hidden Variables
 @section Variables
 @cindex variables
 @cindex dictionary
@@ -387,7 +387,7 @@
 * Scratch Variables::           Variables deleted by procedures.
 @end menu
address@hidden Attributes, System Variables, Variables, Variables
address@hidden Attributes
 @subsection Attributes of Variables
 @cindex variables, attributes of
 @cindex attributes of variables
@@ -478,7 +478,7 @@
 @end table
address@hidden System Variables, Sets of Variables, Attributes, Variables
address@hidden System Variables
 @subsection Variables Automatically Defined by PSPP
 @cindex system variables
 @cindex variables, system
@@ -522,7 +522,7 @@
 Page width, in characters, in format F3.
 @end table
address@hidden Sets of Variables, Input and Output Formats, System Variables, 
address@hidden Sets of Variables
 @subsection Lists of variable names
 @cindex @code{TO} convention
 @cindex convention, @code{TO}
@@ -551,7 +551,7 @@
 another command with this method, the same set can be referenced on
 later commands using the same syntax.
address@hidden Input and Output Formats, Scratch Variables, Sets of Variables, 
address@hidden Input and Output Formats
 @subsection Input and Output Formats
 @cindex formats
@@ -1232,7 +1232,7 @@
 input, uppercase and lowercase are both accepted.  The default output
 format is A format with half the input width.
address@hidden Scratch Variables,  , Input and Output Formats, Variables
address@hidden Scratch Variables
 @subsection Scratch Variables
 @cindex scratch variables
Index: merge/doc/license.texi
--- merge.orig/doc/license.texi 2006-11-30 21:45:29.000000000 -0800
+++ merge/doc/license.texi      2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden License, Invocation, Introduction, Top
address@hidden License
 @chapter Your rights and obligations
 @cindex license
 @cindex licence
Index: merge/doc/not-implemented.texi
--- merge.orig/doc/not-implemented.texi 2006-11-30 21:45:29.000000000 -0800
+++ merge/doc/not-implemented.texi      2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Not Implemented, Bugs, Utilities, Top
address@hidden Not Implemented
 @chapter Not Implemented
 This chapter lists parts of the PSPP language that are not yet
Index: merge/doc/portable-file-format.texi
--- merge.orig/doc/portable-file-format.texi    2005-07-30 13:25:07.000000000 
+++ merge/doc/portable-file-format.texi 2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Portable File Format, Data File Format, Configuration, Top
address@hidden Portable File Format
 @appendix Portable File Format
 These days, most computers use the same internal data formats for
@@ -25,7 +25,7 @@
 * Portable File Data::          
 @end menu
address@hidden Portable File Characters, Portable File Structure, Portable File 
Format, Portable File Format
address@hidden Portable File Characters
 @section Portable File Characters
 Portable files are arranged as a series of lines of exactly 80
@@ -45,7 +45,7 @@
 because they are not an important part of understanding the file
address@hidden Portable File Structure, Portable File Header, Portable File 
Characters, Portable File Format
address@hidden Portable File Structure
 @section Portable File Structure
 Every portable file consists of the following records, in sequence:
@@ -127,7 +127,7 @@
 String fields take the form of a integer field having value @var{n},
 followed by exactly @var{n} characters, which are the string content.
address@hidden Portable File Header, Version and Date Info Record, Portable 
File Structure, Portable File Format
address@hidden Portable File Header
 @section Portable File Header
 Every portable file begins with a 464-byte header, consisting of a
@@ -304,7 +304,7 @@
 in the portable file's character set, which can be used to verify that
 the file is indeed a portable file.
address@hidden Version and Date Info Record, Identification Records, Portable 
File Header, Portable File Format
address@hidden Version and Date Info Record
 @section Version and Date Info Record
 This record does not have a tag code.  It has the following structure:
@@ -323,7 +323,7 @@
 @end itemize
address@hidden Identification Records, Variable Count Record, Version and Date 
Info Record, Portable File Format
address@hidden Identification Records
 @section Identification Records
 The product identification record has tag code @samp{1}.  It consists of
@@ -338,7 +338,7 @@
 optional.  If present, it consists of a single string field giving
 additional information on the product that wrote the portable file.
address@hidden Variable Count Record, Case Weight Variable Record, 
Identification Records, Portable File Format
address@hidden Variable Count Record
 @section Variable Count Record
 The variable count record has tag code @samp{4}.  It consists of two
@@ -346,7 +346,7 @@
 dictionary.  The purpose of the second is unknown; it contains the value
 161 in all portable files examined so far.
address@hidden Case Weight Variable Record, Variable Records, Variable Count 
Record, Portable File Format
address@hidden Case Weight Variable Record
 @section Case Weight Variable Record
 The case weight variable record is optional.  If it is present, it
@@ -354,7 +354,7 @@
 cases are unweighted.  It has tag code @samp{6}.  It consists of a
 single string field that names the weighting variable.
address@hidden Variable Records, Value Label Records, Case Weight Variable 
Record, Portable File Format
address@hidden Variable Records
 @section Variable Records
 Each variable record represents a single variable.  Variable records
@@ -407,7 +407,7 @@
 variable label record, which has tag code @samp{C}.  A variable label
 record has one field, the variable label itself (string).
address@hidden Value Label Records, Portable File Data, Variable Records, 
Portable File Format
address@hidden Value Label Records
 @section Value Label Records
 Value label records have tag code @samp{D}.  They have the following
@@ -431,7 +431,7 @@
 appropriate to the variables, followed by a label (string).
 @end itemize
address@hidden Portable File Data,  , Value Label Records, Portable File Format
address@hidden Portable File Data
 @section Portable File Data
 The data record has tag code @samp{F}.  There is only one tag for all
Index: merge/doc/q2c.texi
--- merge.orig/doc/q2c.texi     2007-05-31 15:59:42.000000000 -0700
+++ merge/doc/q2c.texi  2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden q2c Input Format, GNU Free Documentation License, Data File 
Format, Top
address@hidden q2c Input Format
 @appendix @code{q2c} Input Format
 PSPP statistical procedures have a bizarre and somewhat irregular
@@ -13,7 +13,7 @@
 * Grammar Rules::               Syntax of the grammar rules.
 @end menu
address@hidden Invoking q2c, q2c Input Structure, q2c Input Format, q2c Input 
address@hidden Invoking q2c
 @section Invoking q2c
@@ -25,7 +25,7 @@
 output file name, respectively.  @code{q2c} does not accept any
 command-line options.
address@hidden q2c Input Structure, Grammar Rules, Invoking q2c, q2c Input 
address@hidden q2c Input Structure
 @section @code{q2c} Input Structure
 @code{q2c} input files are divided into two sections: the grammar rules
@@ -78,7 +78,7 @@
 @code{string} are used in the grammar rules.
 @end table
address@hidden Grammar Rules,  , q2c Input Structure, q2c Input Format
address@hidden Grammar Rules
 @section Grammar Rules
 The grammar rules describe the format of the syntax that the parser
Index: merge/doc/regression.texi
--- merge.orig/doc/regression.texi      2006-11-30 21:45:29.000000000 -0800
+++ merge/doc/regression.texi   2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden REGRESSION, ,RANK, Statistics
address@hidden REGRESSION
 @comment  node-name,  next,  previous,  up
 @section REGRESSION
@@ -38,7 +38,7 @@
 * Examples::                    Using the REGRESSION procedure.
 @end menu
address@hidden Syntax, Examples, , REGRESSION
address@hidden Syntax
 @subsection Syntax
@@ -99,7 +99,7 @@
 program and use it as part of another program. This subcommand is a
 PSPP extension.
address@hidden Examples, , Syntax, REGRESSION
address@hidden Examples
 @subsection Examples
 The following PSPP syntax will generate the default output, save the
 predicted values and residuals to the active file, and save the
Index: merge/doc/statistics.texi
--- merge.orig/doc/statistics.texi      2007-02-19 10:58:11.000000000 -0800
+++ merge/doc/statistics.texi   2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Statistics, Utilities, Conditionals and Looping, Top
address@hidden Statistics
 @chapter Statistics
 This chapter documents the statistical procedures that PSPP supports so
@@ -16,7 +16,7 @@
 * REGRESSION::                  Linear regression.
 @end menu
address@hidden DESCRIPTIVES, FREQUENCIES, Statistics, Statistics
address@hidden DESCRIPTIVES
@@ -106,7 +106,7 @@
 and D settings request an ascending or descending sort order,
address@hidden FREQUENCIES
@@ -230,7 +230,7 @@
 displayed slices to a given range of values.  The MISSING keyword adds
 slices for missing values.
address@hidden EXAMINE, CROSSTABS, FREQUENCIES, Statistics
address@hidden EXAMINE
 @comment  node-name,  next,  previous,  up
 @section EXAMINE
 @vindex EXAMINE
@@ -305,7 +305,7 @@
 large quantity of output.
address@hidden CROSSTABS, NPAR TESTS, EXAMINE, Statistics
address@hidden CROSSTABS
 @section CROSSTABS
 @vindex CROSSTABS
@@ -494,7 +494,7 @@
 Fixes for any of these deficiencies would be welcomed.
address@hidden NPAR TESTS, T-TEST, CROSSTABS, Statistics
address@hidden NPAR TESTS
 @section NPAR TESTS
 @vindex NPAR TESTS
@@ -527,7 +527,7 @@
 @end menu
address@hidden    BINOMIAL
 @subsection Binomial test
 @vindex BINOMIAL
 @cindex binomial test
@@ -575,7 +575,7 @@
address@hidden    CHISQUARE
 @subsection Chisquare test
 @vindex CHISQUARE
 @cindex chisquare test
@@ -604,7 +604,7 @@
 are expected.
address@hidden T-TEST, ONEWAY, NPAR TESTS, Statistics
address@hidden T-TEST
 @comment  node-name,  next,  previous,  up
 @section T-TEST
@@ -670,7 +670,7 @@
 * Paired Samples Mode::         Testing two interdependent groups for equal 
 @end menu
address@hidden One Sample Mode, Independent Samples Mode, T-TEST, T-TEST
address@hidden One Sample Mode
 @subsection One Sample Mode
 The @cmd{TESTVAL} subcommand invokes the One Sample mode.
@@ -681,7 +681,7 @@
 In this mode, you must also use the @cmd{/VARIABLES} subcommand to
 tell PSPP which variables you wish to test.
address@hidden Independent Samples Mode, Paired Samples Mode, One Sample Mode, 
address@hidden Independent Samples Mode
 @comment  node-name,  next,  previous,  up
 @subsection Independent Samples Mode
@@ -709,7 +709,7 @@
 of whether @cmd{/MISSING=LISTWISE} was specified.
address@hidden Paired Samples Mode,  , Independent Samples Mode, T-TEST
address@hidden Paired Samples Mode
 @comment  node-name,  next,  previous,  up
 @subsection Paired Samples Mode
@@ -730,7 +730,7 @@
 @code{WITH} are generated.
address@hidden ONEWAY, RANK, T-TEST, Statistics
address@hidden ONEWAY
 @comment  node-name,  next,  previous,  up
 @section ONEWAY
@@ -780,7 +780,7 @@
 to specify different contrast tests.
 @setfilename ignored
address@hidden RANK, REGRESSION, ONEWAY, Statistics
address@hidden RANK
 @comment  node-name,  next,  previous,  up
 @section RANK
Index: merge/doc/transformation.texi
--- merge.orig/doc/transformation.texi  2007-03-31 10:25:25.000000000 -0700
+++ merge/doc/transformation.texi       2007-05-31 22:55:18.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Data Manipulation, Data Selection, Variable Attributes, Top
address@hidden Data Manipulation
 @chapter Data transformations
 @cindex transformations
@@ -17,7 +17,7 @@
 * SORT CASES::                  Sort the active file.
 @end menu
address@hidden AGGREGATE, AUTORECODE, Data Manipulation, Data Manipulation
address@hidden AGGREGATE
 @section AGGREGATE
 @vindex AGGREGATE
@@ -194,7 +194,7 @@
 @cmd{AGGREGATE} both ignores and cancels the current @cmd{SPLIT FILE}
 settings (@pxref{SPLIT FILE}).
address@hidden AUTORECODE, COMPUTE, AGGREGATE, Data Manipulation
address@hidden AUTORECODE
 @section AUTORECODE
@@ -224,7 +224,7 @@
 @cmd{AUTORECODE} is a procedure.  It causes the data to be read.
address@hidden COMPUTE, COUNT, AUTORECODE, Data Manipulation
address@hidden COMPUTE
 @section COMPUTE
 @vindex COMPUTE
@@ -264,7 +264,7 @@
 (@pxref{TEMPORARY}), the @cmd{LAG} function may not be used
address@hidden COUNT, FLIP, COMPUTE, Data Manipulation
address@hidden COUNT
 @section COUNT
 @vindex COUNT
@@ -368,7 +368,7 @@
 @end example
 @end enumerate
address@hidden FLIP, IF, COUNT, Data Manipulation
address@hidden FLIP
 @section FLIP
 @vindex FLIP
@@ -414,7 +414,7 @@
 @cmd{TEMPORARY} (@pxref{TEMPORARY}), so that ``temporary''
 transformations become permanent.
address@hidden IF, RECODE, FLIP, Data Manipulation
address@hidden IF
 @section IF
 @vindex IF
@@ -452,7 +452,7 @@
 (@pxref{TEMPORARY}), the @cmd{LAG} function may not be used
address@hidden RECODE, SORT CASES, IF, Data Manipulation
address@hidden RECODE
 @section RECODE
 @vindex RECODE
@@ -520,7 +520,7 @@
 Introduce additional recodings with a slash (@samp{/}) to
 separate them from the previous recodings.
address@hidden SORT CASES,  , RECODE, Data Manipulation
address@hidden SORT CASES
 @section SORT CASES
 @vindex SORT CASES
Index: merge/doc/utilities.texi
--- merge.orig/doc/utilities.texi       2007-05-05 10:43:24.000000000 -0700
+++ merge/doc/utilities.texi    2007-05-31 22:55:56.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Utilities, Not Implemented, Statistics, Top
address@hidden Utilities
 @chapter Utilities
 Commands that don't fit any other category are placed here.
@@ -51,7 +51,7 @@
address@hidden COMMENT, DOCUMENT, ADD DOCUMENT, Utilities
address@hidden COMMENT
 @section COMMENT
 @vindex COMMENT
 @vindex *
@@ -70,7 +70,7 @@
address@hidden DOCUMENT
 @section DOCUMENT
 @vindex DOCUMENT
@@ -91,7 +91,7 @@
 Lines are truncated at 80 bytes.  Don't forget to terminate
 the command with a dot or a blank line. @xref{ADD DOCUMENT}.
address@hidden DISPLAY DOCUMENTS
@@ -103,7 +103,7 @@
 document is preceded by a line giving the time and date that it was
 added.  @xref{DOCUMENT}.
address@hidden DISPLAY FILE LABEL
@@ -117,7 +117,7 @@
 This command is a PSPP extension.
address@hidden DROP DOCUMENTS
@@ -131,7 +131,7 @@
 @cmd{DROP DOCUMENTS} changes only the active file.  It does not modify any
 system files stored on disk.
address@hidden ECHO, ERASE, DROP DOCUMENTS, Utilities
address@hidden ECHO
 @section ECHO
 @vindex ECHO
@@ -141,7 +141,7 @@
 Use @cmd{ECHO} to write arbitrary text to the output stream. The text should 
be enclosed in quotation marks following the normal rules for string tokens 
address@hidden ERASE, EXECUTE, ECHO, Utilities
address@hidden ERASE
 @comment  node-name,  next,  previous,  up
 @section ERASE
 @vindex ERASE
@@ -155,7 +155,7 @@
 This command cannot be used if the SAFER setting is active.
address@hidden EXECUTE, FILE LABEL, ERASE, Utilities
address@hidden EXECUTE
 @section EXECUTE
 @vindex EXECUTE
@@ -166,7 +166,7 @@
 @cmd{EXECUTE} causes the active file to be read and all pending
 transformations to be executed.
address@hidden FILE LABEL, FINISH, EXECUTE, Utilities
address@hidden FILE LABEL
 @section FILE LABEL
 @vindex FILE LABEL
@@ -181,7 +181,7 @@
 file_label need not be quoted.  If quotes are
 included, they become part of the file label.
address@hidden FINISH, HOST, FILE LABEL, Utilities
address@hidden FINISH
 @section FINISH
 @vindex FINISH
@@ -192,7 +192,7 @@
 @cmd{FINISH} terminates the current PSPP session and returns
 control to the operating system.
address@hidden HOST, INCLUDE, FINISH, Utilities
address@hidden HOST
 @comment  node-name,  next,  previous,  up
 @section HOST
 @vindex HOST
@@ -206,7 +206,7 @@
 This command cannot be used if the SAFER setting is active.
address@hidden INCLUDE, PERMISSIONS, HOST, Utilities
address@hidden INCLUDE
 @section INCLUDE
 @vindex INCLUDE
 @vindex @@
@@ -224,7 +224,7 @@
 Include files may be nested to any depth, up to the limit of available
address@hidden PERMISSIONS, SET, INCLUDE, Utilities
address@hidden PERMISSIONS
 @comment  node-name,  next,  previous,  up
@@ -249,7 +249,7 @@
 This command cannot be used if the SAFER setting is active.
address@hidden SET, SHOW, PERMISSIONS, Utilities
address@hidden SET
 @section SET
 @vindex SET
@@ -621,7 +621,7 @@
 obvious security reasons.
 @end table
address@hidden SHOW, SUBTITLE, SET, Utilities
address@hidden SHOW
 @comment  node-name,  next,  previous,  up
 @section SHOW
 @vindex SHOW
@@ -670,7 +670,7 @@
 Specifying @cmd{SHOW} without any subcommands is equivalent to SHOW ALL.
address@hidden SUBTITLE, TITLE, SHOW, Utilities
address@hidden SUBTITLE
 @section SUBTITLE
 @vindex SUBTITLE
@@ -688,7 +688,7 @@
 not require quotes is now obsolete.  If it is used then the subtitle is
 converted to all uppercase.
address@hidden TITLE,  , SUBTITLE, Utilities
address@hidden TITLE
 @section TITLE
 @vindex TITLE
Index: merge/doc/variables.texi
--- merge.orig/doc/variables.texi       2007-02-08 21:28:40.000000000 -0800
+++ merge/doc/variables.texi    2007-05-31 22:55:19.000000000 -0700
@@ -1,4 +1,4 @@
address@hidden Variable Attributes, Data Manipulation, System and Portable 
Files, Top
address@hidden Variable Attributes
 @chapter Manipulating variables
 The variables in the active file dictionary are important.  There are
@@ -26,7 +26,7 @@
 * WRITE FORMATS::               Set variable write formats.
 @end menu
address@hidden ADD VALUE LABELS, DELETE VARIABLES, Variable Attributes, 
Variable Attributes
address@hidden ADD VALUE LABELS
@@ -39,7 +39,7 @@
 LABELS} (@pxref{VALUE LABELS}), but it does not clear value
 labels from the variables before adding the ones specified.
address@hidden DELETE VARIABLES, DISPLAY, ADD VALUE LABELS, Variable Attributes
address@hidden DELETE VARIABLES
@@ -56,7 +56,7 @@
 causes the data to be read.  If it is used while @cmd{TEMPORARY} is in
 effect, it causes the temporary transformations to become permanent.
address@hidden DISPLAY, DISPLAY VECTORS, DELETE VARIABLES, Variable Attributes
address@hidden DISPLAY
 @section DISPLAY
 @vindex DISPLAY
@@ -99,7 +99,7 @@
 order based on their names; otherwise, they are displayed in the order
 that they occur in the active file dictionary.
address@hidden DISPLAY VECTORS, FORMATS, DISPLAY, Variable Attributes
address@hidden DISPLAY VECTORS
@@ -109,7 +109,7 @@
 @cmd{DISPLAY VECTORS} lists all the currently declared vectors.
address@hidden FORMATS, LEAVE, DISPLAY VECTORS, Variable Attributes
address@hidden FORMATS
 @section FORMATS
 @vindex FORMATS
@@ -131,7 +131,7 @@
 @cmd{FORMATS} takes effect immediately.  It is not affected by
 conditional and looping structures such as @cmd{DO IF} or @cmd{LOOP}.
address@hidden LEAVE, MISSING VALUES, FORMATS, Variable Attributes
address@hidden LEAVE
 @section LEAVE
 @vindex LEAVE
@@ -180,7 +180,7 @@
 certain transformations---for instance, @cmd{COMPUTE} and @cmd{IF}.
 Left status is also reset by all procedure invocations.
address@hidden MISSING VALUES, MODIFY VARS, LEAVE, Variable Attributes
address@hidden MISSING VALUES
@@ -214,7 +214,7 @@
 affected by conditional and looping constructs such as @cmd{DO IF} or
address@hidden MODIFY VARS, NUMERIC, MISSING VALUES, Variable Attributes
address@hidden MODIFY VARS
 @section MODIFY VARS
 @vindex MODIFY VARS
@@ -261,7 +261,7 @@
 @cmd{MODIFY VARS} may not be specified following @cmd{TEMPORARY}
address@hidden NUMERIC, PRINT FORMATS, MODIFY VARS, Variable Attributes
address@hidden NUMERIC
 @section NUMERIC
 @vindex NUMERIC
@@ -280,7 +280,7 @@
 Variables created with @cmd{NUMERIC} are initialized to the
 system-missing value.
address@hidden PRINT FORMATS, RENAME VARIABLES, NUMERIC, Variable Attributes
address@hidden PRINT FORMATS
@@ -294,7 +294,7 @@
 Its syntax is identical to that of @cmd{FORMATS} (@pxref{FORMATS}),
 but @cmd{PRINT FORMATS} sets only print formats, not write formats.
address@hidden RENAME VARIABLES
@@ -315,7 +315,7 @@
 @cmd{RENAME VARIABLES} may not be specified following @cmd{TEMPORARY}
address@hidden VALUE LABELS, STRING, RENAME VARIABLES, Variable Attributes
address@hidden VALUE LABELS
 @section VALUE LABELS
@@ -338,7 +338,7 @@
 (@pxref{ADD VALUE LABELS}) to add value labels without clearing those
 already present.
address@hidden STRING, VARIABLE LABELS, VALUE LABELS, Variable Attributes
address@hidden STRING
 @section STRING
 @vindex STRING
@@ -357,7 +357,7 @@
 Created variables are initialized to spaces.
address@hidden VARIABLE LABELS, VARIABLE ALIGNMENT, STRING, Variable Attributes
address@hidden VARIABLE LABELS
@@ -381,7 +381,7 @@
 preceed the subsequent variable list with a slash (@samp{/}).
 @comment  node-name,  next,  previous,  u
@@ -403,7 +403,7 @@
address@hidden VARIABLE WIDTH
 @comment  node-name,  next,  previous,  up
@@ -422,7 +422,7 @@
 the display of variables in the PSPP output.
address@hidden VARIABLE LEVEL, VECTOR, VARIABLE WIDTH, Variable Attributes
address@hidden VARIABLE LEVEL
 @comment  node-name,  next,  previous,  up
@@ -440,7 +440,7 @@
 Currently, this has no effect except for certain third party software.
address@hidden VECTOR, WRITE FORMATS, VARIABLE LEVEL, Variable Attributes
address@hidden VECTOR
 @section VECTOR
 @vindex VECTOR
@@ -476,7 +476,7 @@
 Variables within a vector may be referenced in expressions using
 @code{vector(index)} syntax.
address@hidden WRITE FORMATS,  , VECTOR, Variable Attributes
address@hidden WRITE FORMATS


reply via email to

[Prev in Thread] Current Thread [Next in Thread]