[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v4 14/18] migration/rdma: register memory for multifd RDMA ch
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [PATCH v4 14/18] migration/rdma: register memory for multifd RDMA channels |
Date: |
Wed, 3 Feb 2021 20:12:11 +0000 |
User-agent: |
Mutt/1.14.6 (2020-07-11) |
* Chuan Zheng (zhengchuan@huawei.com) wrote:
> Signed-off-by: Zhimin Feng <fengzhimin1@huawei.com>
> Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
This could do with a description in the commit message of the sequence;
I think you're waiting for the semaphore; doing the registratin, then
waiting again to say that everyone has finished???
> ---
> migration/multifd.c | 3 ++
> migration/rdma.c | 92
> +++++++++++++++++++++++++++++++++++++++++++++++++++--
> 2 files changed, 93 insertions(+), 2 deletions(-)
>
> diff --git a/migration/multifd.c b/migration/multifd.c
> index 919a414..1186246 100644
> --- a/migration/multifd.c
> +++ b/migration/multifd.c
> @@ -537,6 +537,9 @@ void multifd_send_terminate_threads(Error *err)
> qemu_mutex_lock(&p->mutex);
> p->quit = true;
> qemu_sem_post(&p->sem);
> + if (migrate_use_rdma()) {
> + qemu_sem_post(&p->sem_sync);
> + }
> qemu_mutex_unlock(&p->mutex);
> }
> }
> diff --git a/migration/rdma.c b/migration/rdma.c
> index 1095a8f..c906cc7 100644
> --- a/migration/rdma.c
> +++ b/migration/rdma.c
> @@ -3838,6 +3838,19 @@ static int rdma_load_hook(QEMUFile *f, void *opaque,
> uint64_t flags, void *data)
> return rdma_block_notification_handle(opaque, data);
>
> case RAM_CONTROL_HOOK:
> + if (migrate_use_multifd()) {
> + int i;
> + MultiFDRecvParams *multifd_recv_param = NULL;
> + int thread_count = migrate_multifd_channels();
> + /* Inform dest recv_thread to poll */
> + for (i = 0; i < thread_count; i++) {
> + if (get_multifd_recv_param(i, &multifd_recv_param)) {
> + return -1;
> + }
> + qemu_sem_post(&multifd_recv_param->sem_sync);
> + }
> + }
> +
> return qemu_rdma_registration_handle(f, opaque);
>
> default:
> @@ -3910,6 +3923,24 @@ static int qemu_rdma_registration_stop(QEMUFile *f,
> void *opaque,
> head.type = RDMA_CONTROL_RAM_BLOCKS_REQUEST;
> trace_qemu_rdma_registration_stop_ram();
>
> + if (migrate_use_multifd()) {
> + /*
> + * Inform the multifd channels to register memory
> + */
> + int i;
> + int thread_count = migrate_multifd_channels();
> + MultiFDSendParams *multifd_send_param = NULL;
> + for (i = 0; i < thread_count; i++) {
> + ret = get_multifd_send_param(i, &multifd_send_param);
> + if (ret) {
> + error_report("rdma: error getting multifd(%d)", i);
> + return ret;
> + }
> +
> + qemu_sem_post(&multifd_send_param->sem_sync);
> + }
> + }
> +
> /*
> * Make sure that we parallelize the pinning on both sides.
> * For very large guests, doing this serially takes a really
> @@ -3968,6 +3999,21 @@ static int qemu_rdma_registration_stop(QEMUFile *f,
> void *opaque,
> rdma->dest_blocks[i].remote_host_addr;
> local->block[i].remote_rkey = rdma->dest_blocks[i].remote_rkey;
> }
> + /* Wait for all multifd channels to complete registration */
> + if (migrate_use_multifd()) {
> + int i;
> + int thread_count = migrate_multifd_channels();
> + MultiFDSendParams *multifd_send_param = NULL;
> + for (i = 0; i < thread_count; i++) {
> + ret = get_multifd_send_param(i, &multifd_send_param);
> + if (ret) {
> + error_report("rdma: error getting multifd(%d)", i);
> + return ret;
> + }
> +
> + qemu_sem_wait(&multifd_send_param->sem);
> + }
> + }
> }
>
> trace_qemu_rdma_registration_stop(flags);
> @@ -3979,6 +4025,24 @@ static int qemu_rdma_registration_stop(QEMUFile *f,
> void *opaque,
> goto err;
> }
>
> + if (migrate_use_multifd()) {
> + /*
> + * Inform src send_thread to send FINISHED signal.
> + * Wait for multifd RDMA send threads to poll the CQE.
> + */
> + int i;
> + int thread_count = migrate_multifd_channels();
> + MultiFDSendParams *multifd_send_param = NULL;
> + for (i = 0; i < thread_count; i++) {
> + ret = get_multifd_send_param(i, &multifd_send_param);
> + if (ret < 0) {
> + goto err;
> + }
> +
> + qemu_sem_post(&multifd_send_param->sem_sync);
> + }
> + }
> +
> return 0;
> err:
> rdma->error_state = ret;
> @@ -4355,19 +4419,37 @@ static void *multifd_rdma_send_thread(void *opaque)
> {
> MultiFDSendParams *p = opaque;
> Error *local_err = NULL;
> + int ret = 0;
> + RDMAControlHeader head = { .len = 0, .repeat = 1 };
>
> trace_multifd_send_thread_start(p->id);
> if (multifd_send_initial_packet(p, &local_err) < 0) {
> goto out;
> }
>
> + /* wait for semaphore notification to register memory */
> + qemu_sem_wait(&p->sem_sync);
> + if (qemu_rdma_registration(p->rdma) < 0) {
> + goto out;
> + }
> + /*
> + * Inform the main RDMA thread to run when multifd
> + * RDMA thread have completed registration.
> + */
> + qemu_sem_post(&p->sem);
> while (true) {
> + qemu_sem_wait(&p->sem_sync);
> WITH_QEMU_LOCK_GUARD(&p->mutex) {
> if (p->quit) {
> break;
> }
> }
> - qemu_sem_wait(&p->sem);
Is this something where you put the line in just a few patches earlier -
if so, put it in the right place in the original patch.
Dave
> + /* Send FINISHED to the destination */
> + head.type = RDMA_CONTROL_REGISTER_FINISHED;
> + ret = qemu_rdma_exchange_send(p->rdma, &head, NULL, NULL, NULL,
> NULL);
> + if (ret < 0) {
> + return NULL;
> + }
> }
>
> out:
> @@ -4406,14 +4488,20 @@ static void
> multifd_rdma_send_channel_setup(MultiFDSendParams *p)
> static void *multifd_rdma_recv_thread(void *opaque)
> {
> MultiFDRecvParams *p = opaque;
> + int ret = 0;
>
> while (true) {
> + qemu_sem_wait(&p->sem_sync);
> WITH_QEMU_LOCK_GUARD(&p->mutex) {
> if (p->quit) {
> break;
> }
> }
> - qemu_sem_wait(&p->sem_sync);
> + ret = qemu_rdma_registration_handle(p->file, p->c);
> + if (ret < 0) {
> + qemu_file_set_error(p->file, ret);
> + break;
> + }
> }
>
> WITH_QEMU_LOCK_GUARD(&p->mutex) {
> --
> 1.8.3.1
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
- [PATCH v4 07/18] migration/rdma: add rdma field into multifd send/recv param, (continued)
- [PATCH v4 07/18] migration/rdma: add rdma field into multifd send/recv param, Chuan Zheng, 2021/02/03
- [PATCH v4 02/18] migration/rdma: judge whether or not the RDMA is used for migration, Chuan Zheng, 2021/02/03
- [PATCH v4 03/18] migration/rdma: create multifd_setup_ops for Tx/Rx thread, Chuan Zheng, 2021/02/03
- [PATCH v4 15/18] migration/rdma: only register the memory for multifd channels, Chuan Zheng, 2021/02/03
- [PATCH v4 06/18] migration/rdma: export MultiFDSendParams/MultiFDRecvParams, Chuan Zheng, 2021/02/03
- [PATCH v4 14/18] migration/rdma: register memory for multifd RDMA channels, Chuan Zheng, 2021/02/03
- Re: [PATCH v4 14/18] migration/rdma: register memory for multifd RDMA channels,
Dr. David Alan Gilbert <=
- [PATCH v4 08/18] migration/rdma: export getQIOChannel to get QIOchannel in rdma, Chuan Zheng, 2021/02/03
- [PATCH v4 10/18] migration/rdma: Create the multifd recv channels for RDMA, Chuan Zheng, 2021/02/03
- [PATCH v4 16/18] migration/rdma: add rdma_channel into Migrationstate field, Chuan Zheng, 2021/02/03
- [PATCH v4 18/18] migration/rdma: RDMA cleanup for multifd migration, Chuan Zheng, 2021/02/03
- [PATCH v4 09/18] migration/rdma: add multifd_rdma_load_setup() to setup multifd rdma, Chuan Zheng, 2021/02/03
- [PATCH v4 17/18] migration/rdma: send data for both rdma-pin-all and NOT rdma-pin-all mode, Chuan Zheng, 2021/02/03