[PATCH v3 03/15] target/ppc: PMU basic cycle count for pseries TCG

[Daniel Henrique Barboza]

This patch adds the barebones of the PMU logic by enabling cycle
counting, done via the performance monitor counter 6. The overall logic
goes as follows:

- a helper is added to control the PMU state on each MMCR0 write. This
allows for the PMU to start/stop as the frozen counter bit (MMCR0_FC)
is cleared or set;

- MMCR0 reg initial value is set to 0x80000000 (MMCR0_FC set) to avoid
having to spin the PMU right at system init;

- the intended usage is to freeze the counters by setting MMCR0_FC, do
any additional setting of events to be counted via MMCR1 (not
implemented yet) and enable the PMU by zeroing MMCR0_FC. Software must
freeze counters to read the results - on the fly reading of the PMCs
will return the starting value of each one.

Since there will be more PMU exclusive code to be added next, put the
PMU logic in its own helper to keep all in the same place. The name of
the new helper file, power8_pmu.c, is an indicative that the PMU logic
has been tested with the IBM POWER chip family, POWER8 being the oldest
version tested. This doesn't mean that this PMU logic will break with
any other PPC64 chip that implements Book3s, but since we can't assert
that this PMU will work with all available Book3s emulated processors
we're choosing to be explicit.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
 target/ppc/cpu.h        |  6 ++++
 target/ppc/cpu_init.c   |  6 ++--
 target/ppc/helper.h     |  1 +
 target/ppc/meson.build  |  1 +
 target/ppc/power8_pmu.c | 74 +++++++++++++++++++++++++++++++++++++++++
 target/ppc/spr_tcg.h    |  1 +
 target/ppc/translate.c  | 23 ++++++++++++-
 7 files changed, 108 insertions(+), 4 deletions(-)
 create mode 100644 target/ppc/power8_pmu.c

diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index 8dfbb62022..a9b31736af 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -1178,6 +1178,12 @@ struct CPUPPCState {
     uint32_t tm_vscr;
     uint64_t tm_dscr;
     uint64_t tm_tar;
+
+    /*
+     * PMU base time value used by the PMU to calculate
+     * running cycles.
+     */
+    uint64_t pmu_base_time;
 };
 
 #define SET_FIT_PERIOD(a_, b_, c_, d_)          \
diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c
index bb5ea04c61..07c79745ba 100644
--- a/target/ppc/cpu_init.c
+++ b/target/ppc/cpu_init.c
@@ -6820,8 +6820,8 @@ static void register_book3s_pmu_sup_sprs(CPUPPCState *env)
 {
     spr_register_kvm(env, SPR_POWER_MMCR0, "MMCR0",
                      SPR_NOACCESS, SPR_NOACCESS,
-                     &spr_read_generic, &spr_write_generic,
-                     KVM_REG_PPC_MMCR0, 0x00000000);
+                     &spr_read_generic, &spr_write_MMCR0,
+                     KVM_REG_PPC_MMCR0, 0x80000000);
     spr_register_kvm(env, SPR_POWER_MMCR1, "MMCR1",
                      SPR_NOACCESS, SPR_NOACCESS,
                      &spr_read_generic, &spr_write_generic,
@@ -6869,7 +6869,7 @@ static void register_book3s_pmu_user_sprs(CPUPPCState 
*env)
     spr_register(env, SPR_POWER_UMMCR0, "UMMCR0",
                  &spr_read_MMCR0_ureg, &spr_write_MMCR0_ureg,
                  &spr_read_ureg, &spr_write_ureg,
-                 0x00000000);
+                 0x80000000);
     spr_register(env, SPR_POWER_UMMCR1, "UMMCR1",
                  &spr_read_ureg, SPR_NOACCESS,
                  &spr_read_ureg, &spr_write_ureg,
diff --git a/target/ppc/helper.h b/target/ppc/helper.h
index 4076aa281e..5122632784 100644
--- a/target/ppc/helper.h
+++ b/target/ppc/helper.h
@@ -20,6 +20,7 @@ DEF_HELPER_1(rfscv, void, env)
 DEF_HELPER_1(hrfid, void, env)
 DEF_HELPER_2(store_lpcr, void, env, tl)
 DEF_HELPER_2(store_pcr, void, env, tl)
+DEF_HELPER_2(store_mmcr0, void, env, tl)
 #endif
 DEF_HELPER_1(check_tlb_flush_local, void, env)
 DEF_HELPER_1(check_tlb_flush_global, void, env)
diff --git a/target/ppc/meson.build b/target/ppc/meson.build
index b85f295703..278ce07da9 100644
--- a/target/ppc/meson.build
+++ b/target/ppc/meson.build
@@ -14,6 +14,7 @@ ppc_ss.add(when: 'CONFIG_TCG', if_true: files(
   'int_helper.c',
   'mem_helper.c',
   'misc_helper.c',
+  'power8_pmu.c',
   'timebase_helper.c',
   'translate.c',
 ))
diff --git a/target/ppc/power8_pmu.c b/target/ppc/power8_pmu.c
new file mode 100644
index 0000000000..47de38a99e
--- /dev/null
+++ b/target/ppc/power8_pmu.c
@@ -0,0 +1,74 @@
+/*
+ * PMU emulation helpers for TCG IBM POWER chips
+ *
+ *  Copyright IBM Corp. 2021
+ *
+ * Authors:
+ *  Daniel Henrique Barboza      <danielhb413@gmail.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+
+#include "cpu.h"
+#include "helper_regs.h"
+#include "exec/exec-all.h"
+#include "exec/helper-proto.h"
+#include "qemu/error-report.h"
+#include "qemu/main-loop.h"
+
+#if defined(TARGET_PPC64) && !defined(CONFIG_USER_ONLY)
+
+static void update_PMC_PM_CYC(CPUPPCState *env, int sprn,
+                              uint64_t time_delta)
+{
+    /*
+     * The pseries and pvn clock runs at 1Ghz, meaning that
+     * 1 nanosec equals 1 cycle.
+     */
+    env->spr[sprn] += time_delta;
+}
+
+static void update_cycles_PMCs(CPUPPCState *env)
+{
+    uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+    uint64_t time_delta = now - env->pmu_base_time;
+
+    update_PMC_PM_CYC(env, SPR_POWER_PMC6, time_delta);
+}
+
+void helper_store_mmcr0(CPUPPCState *env, target_ulong value)
+{
+    target_ulong curr_value = env->spr[SPR_POWER_MMCR0];
+    bool curr_FC = curr_value & MMCR0_FC;
+    bool new_FC = value & MMCR0_FC;
+
+    env->spr[SPR_POWER_MMCR0] = value;
+
+    /* MMCR0 writes can change HFLAGS_PMCCCLEAR */
+    if ((curr_value & MMCR0_PMCC) != (value & MMCR0_PMCC)) {
+        hreg_compute_hflags(env);
+    }
+
+    /*
+     * In an frozen count (FC) bit change:
+     *
+     * - if PMCs were running (curr_FC = false) and we're freezing
+     * them (new_FC = true), save the PMCs values in the registers.
+     *
+     * - if PMCs were frozen (curr_FC = true) and we're activating
+     * them (new_FC = false), set the new base_time for future cycle
+     * calculations.
+     */
+    if (curr_FC != new_FC) {
+        if (!curr_FC) {
+            update_cycles_PMCs(env);
+        } else {
+            env->pmu_base_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+        }
+    }
+}
+
+#endif /* defined(TARGET_PPC64) && !defined(CONFIG_USER_ONLY) */
diff --git a/target/ppc/spr_tcg.h b/target/ppc/spr_tcg.h
index 094466a2b2..51fbc081de 100644
--- a/target/ppc/spr_tcg.h
+++ b/target/ppc/spr_tcg.h
@@ -25,6 +25,7 @@
 void spr_noaccess(DisasContext *ctx, int gprn, int sprn);
 void spr_read_generic(DisasContext *ctx, int gprn, int sprn);
 void spr_write_generic(DisasContext *ctx, int sprn, int gprn);
+void spr_write_MMCR0(DisasContext *ctx, int sprn, int gprn);
 void spr_read_xer(DisasContext *ctx, int gprn, int sprn);
 void spr_write_xer(DisasContext *ctx, int sprn, int gprn);
 void spr_read_lr(DisasContext *ctx, int gprn, int sprn);
diff --git a/target/ppc/translate.c b/target/ppc/translate.c
index 0babde3131..c3e2e3d329 100644
--- a/target/ppc/translate.c
+++ b/target/ppc/translate.c
@@ -401,6 +401,24 @@ void spr_write_generic(DisasContext *ctx, int sprn, int 
gprn)
     spr_store_dump_spr(sprn);
 }
 
+#if defined(TARGET_PPC64) && !defined(CONFIG_USER_ONLY)
+void spr_write_MMCR0(DisasContext *ctx, int sprn, int gprn)
+{
+    /*
+     * helper_store_mmcr0 will make clock based operations that
+     * will cause 'bad icount read' errors if we do not execute
+     * gen_icount_io_start() beforehand.
+     */
+    gen_icount_io_start(ctx);
+    gen_helper_store_mmcr0(cpu_env, cpu_gpr[gprn]);
+}
+#else
+void spr_write_MMCR0(DisasContext *ctx, int sprn, int gprn)
+{
+    spr_write_generic(ctx, sprn, gprn);
+}
+#endif
+
 #if !defined(CONFIG_USER_ONLY)
 void spr_write_generic32(DisasContext *ctx, int sprn, int gprn)
 {
@@ -596,7 +614,10 @@ void spr_write_MMCR0_ureg(DisasContext *ctx, int sprn, int 
gprn)
     tcg_gen_andi_tl(t1, t1, ~(MMCR0_UREG_MASK));
     /* Keep all other bits intact */
     tcg_gen_or_tl(t1, t1, t0);
-    gen_store_spr(SPR_POWER_MMCR0, t1);
+
+    /* Overwrite cpu_gpr[gprn] and use spr_write_MMCR0() */
+    tcg_gen_mov_tl(cpu_gpr[gprn], t1);
+    spr_write_MMCR0(ctx, sprn + 0x10, gprn);
 
     tcg_temp_free(t0);
     tcg_temp_free(t1);
-- 
2.31.1