Re: [PATCH v3 04/15] target/ppc/power8_pmu.c: enable PMC1-PMC4 events

[David Gibson]

On Fri, Sep 03, 2021 at 05:31:05PM -0300, Daniel Henrique Barboza wrote:
65;6402;1c> This patch enable all PMCs but PMC5 to count cycles. To do that we
> need to implement MMCR1 bits where the event are stored, retrieve
> them, see if the PMC was configured with a PM_CYC event, and
> calculate cycles if that's the case.
> 
> PowerISA v3.1 defines the following conditions to count cycles:
> 
> - PMC1 set with the event 0xF0;
> - PMC6, which always count cycles
> 
> However, the PowerISA also defines a range of 'implementation dependent'
> events that the chip can use in the 0x01-0xBF range. Turns out that IBM
> POWER chips implements some non-ISA events, and the Linux kernel makes uses
> of them. For instance, 0x1E is an implementation specific event that
> counts cycles in PMCs 1-4 that the kernel uses. Let's also support 0x1E
> to count cycles to allow for existing kernels to behave properly with the
> PMU.
> 
> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>

> ---
>  target/ppc/cpu.h        | 11 +++++++++
>  target/ppc/power8_pmu.c | 52 +++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 63 insertions(+)
> 
> diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> index a9b31736af..74698a3600 100644
> --- a/target/ppc/cpu.h
> +++ b/target/ppc/cpu.h
> @@ -352,6 +352,17 @@ typedef struct ppc_v3_pate_t {
>  /* MMCR0 userspace r/w mask */
>  #define MMCR0_UREG_MASK (MMCR0_FC | MMCR0_PMAO | MMCR0_PMAE)
>  
> +#define MMCR1_EVT_SIZE 8
> +/* extract64() does a right shift before extracting */
> +#define MMCR1_PMC1SEL_START 32
> +#define MMCR1_PMC1EVT_EXTR (64 - MMCR1_PMC1SEL_START - MMCR1_EVT_SIZE)
> +#define MMCR1_PMC2SEL_START 40
> +#define MMCR1_PMC2EVT_EXTR (64 - MMCR1_PMC2SEL_START - MMCR1_EVT_SIZE)
> +#define MMCR1_PMC3SEL_START 48
> +#define MMCR1_PMC3EVT_EXTR (64 - MMCR1_PMC3SEL_START - MMCR1_EVT_SIZE)
> +#define MMCR1_PMC4SEL_START 56
> +#define MMCR1_PMC4EVT_EXTR (64 - MMCR1_PMC4SEL_START - MMCR1_EVT_SIZE)
> +
>  /* LPCR bits */
>  #define LPCR_VPM0         PPC_BIT(0)
>  #define LPCR_VPM1         PPC_BIT(1)
> diff --git a/target/ppc/power8_pmu.c b/target/ppc/power8_pmu.c
> index 47de38a99e..3f7b305f4f 100644
> --- a/target/ppc/power8_pmu.c
> +++ b/target/ppc/power8_pmu.c
> @@ -31,10 +31,62 @@ static void update_PMC_PM_CYC(CPUPPCState *env, int sprn,
>      env->spr[sprn] += time_delta;
>  }
>  
> +static void update_programmable_PMC_reg(CPUPPCState *env, int sprn,
> +                                        uint64_t time_delta)
> +{
> +    uint8_t event, evt_extr;
> +
> +    switch (sprn) {
> +    case SPR_POWER_PMC1:
> +        evt_extr = MMCR1_PMC1EVT_EXTR;
> +        break;
> +    case SPR_POWER_PMC2:
> +        evt_extr = MMCR1_PMC2EVT_EXTR;
> +        break;
> +    case SPR_POWER_PMC3:
> +        evt_extr = MMCR1_PMC3EVT_EXTR;
> +        break;
> +    case SPR_POWER_PMC4:
> +        evt_extr = MMCR1_PMC4EVT_EXTR;
> +        break;
> +    default:
> +        return;
> +    }
> +
> +    event = extract64(env->spr[SPR_POWER_MMCR1], evt_extr, MMCR1_EVT_SIZE);
> +
> +    /*
> +     * MMCR0_PMC1SEL = 0xF0 is the architected PowerISA v3.1 event
> +     * that counts cycles using PMC1.
> +     *
> +     * IBM POWER chips also has support for an implementation dependent
> +     * event, 0x1E, that enables cycle counting on PMCs 1-4. The
> +     * Linux kernel makes extensive use of 0x1E, so let's also support
> +     * it.
> +     */
> +    switch (event) {
> +    case 0xF0:
> +        if (sprn == SPR_POWER_PMC1) {
> +            update_PMC_PM_CYC(env, sprn, time_delta);
> +        }
> +        break;
> +    case 0x1E:
> +        update_PMC_PM_CYC(env, sprn, time_delta);
> +        break;
> +    default:
> +        return;
> +    }
> +}
> +
>  static void update_cycles_PMCs(CPUPPCState *env)
>  {
>      uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
>      uint64_t time_delta = now - env->pmu_base_time;
> +    int sprn;
> +
> +    for (sprn = SPR_POWER_PMC1; sprn < SPR_POWER_PMC5; sprn++) {
> +        update_programmable_PMC_reg(env, sprn, time_delta);
> +    }
>  
>      update_PMC_PM_CYC(env, SPR_POWER_PMC6, time_delta);
>  }

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

signature.asc
Description: PGP signature