[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PULL 00/14] aspeed queue
From: |
Cédric Le Goater |
Subject: |
Re: [PULL 00/14] aspeed queue |
Date: |
Tue, 14 Sep 2021 12:58:18 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.11.0 |
On 9/14/21 12:51 PM, Peter Maydell wrote:
> On Mon, 13 Sept 2021 at 17:13, Cédric Le Goater <clg@kaod.org> wrote:
>>
>> The following changes since commit eae587e8e3694b1aceab23239493fb4c7e1a80f5:
>>
>> Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-09-13'
>> into staging (2021-09-13 11:00:30 +0100)
>>
>> are available in the Git repository at:
>>
>> https://github.com/legoater/qemu/ tags/pull-aspeed-20210913
>>
>> for you to fetch changes up to d7add12e20fa8982f5932ff4dca317c5d2dfe7d9:
>>
>> hw/arm/aspeed: Add Fuji machine type (2021-09-13 15:19:20 +0200)
>>
>> ----------------------------------------------------------------
>> Aspeed patches :
>>
>> * MAC enablement fixes (Guenter)
>> * Watchdog and pca9552 fixes (Andrew)
>> * GPIO fixes (Joel)
>> * AST2600A3 SoC and DPS310 models (Joel)
>> * New Fuji BMC machine (Peter)
>
> Hi; this fails 'make check' on 32-bit hosts:
>
> qemu-system-aarch64: at most 2047 MB RAM can be simulated
> Broken pipe
> ERROR qtest-aarch64/qom-test - too few tests run (expected 83, got 31)
>
> I suspect the new machine type has a default of more than 2GB
> of RAM, which won't work on 32 bit systems.
ok. I guess we need to change the Fuji.
Thanks,
C.
- Re: [PULL 14/14] hw/arm/aspeed: Add Fuji machine type, (continued)
[PULL 05/14] hw: aspeed_gpio: Simplify 1.8V defines, Cédric Le Goater, 2021/09/13
[PULL 12/14] hw/arm/aspeed: Initialize AST2600 UART clock selection registers, Cédric Le Goater, 2021/09/13
[PULL 06/14] hw: aspeed_gpio: Clarify GPIO controller name, Cédric Le Goater, 2021/09/13
[PULL 09/14] aspeed: Emulate the AST2600A3, Cédric Le Goater, 2021/09/13
[PULL 13/14] hw/arm/aspeed: Allow machine to set UART default, Cédric Le Goater, 2021/09/13
[PULL 02/14] hw: arm: aspeed: Enable mac0/1 instead of mac1/2 for g220a, Cédric Le Goater, 2021/09/13
Re: [PULL 00/14] aspeed queue, Peter Maydell, 2021/09/14
[PULL 00/14] aspeed queue, Cédric Le Goater, 2021/09/20
- [PULL 07/14] misc/pca9552: Fix LED status register indexing in pca955x_get_led(), Cédric Le Goater, 2021/09/20
- [PULL 03/14] watchdog: aspeed: Sanitize control register values, Cédric Le Goater, 2021/09/20
- [PULL 08/14] arm/aspeed: rainier: Add i2c eeproms and muxes, Cédric Le Goater, 2021/09/20
- [PULL 09/14] aspeed: Emulate the AST2600A3, Cédric Le Goater, 2021/09/20
- [PULL 05/14] hw: aspeed_gpio: Simplify 1.8V defines, Cédric Le Goater, 2021/09/20
- [PULL 10/14] hw/misc: Add Infineon DPS310 sensor model, Cédric Le Goater, 2021/09/20
- [PULL 11/14] arm/aspeed: Add DPS310 to Witherspoon and Rainier, Cédric Le Goater, 2021/09/20
- [PULL 13/14] hw/arm/aspeed: Allow machine to set UART default, Cédric Le Goater, 2021/09/20