[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v4 3/4] target/ppc: Convert debug to trace events (decremente
From: |
David Gibson |
Subject: |
Re: [PATCH v4 3/4] target/ppc: Convert debug to trace events (decrementer and IRQ) |
Date: |
Tue, 21 Sep 2021 11:44:20 +1000 |
On Mon, Sep 20, 2021 at 09:42:25AM +0200, Cédric Le Goater wrote:
> On 9/20/21 09:34, David Gibson wrote:
> > On Mon, Sep 20, 2021 at 08:12:02AM +0200, Cédric Le Goater wrote:
> > > Signed-off-by: Cédric Le Goater <clg@kaod.org>
> >
> > So.. all the functions here are called *set_irq*, but you've named the
> > tracepoints *irq_set*.
>
>
> Yes. I did that on purpose to identify easily the PPC IRQ subsystem,
> and to be able to use '-trace ppc_irq*' from the command line and in
> the monitor.
>
> > It's not a big deal, but it seems like it
> > would be less confusing if you flipped that around to match the
> > function names.
>
> but you would loose the ability to do what I described above.
Good point. Applied to ppc-for-6.2.
>
> Thanks,
>
> C.
> > > ---
> > > hw/ppc/ppc.c | 169 ++++++++++++++++----------------------------
> > > hw/ppc/trace-events | 22 +++++-
> > > 2 files changed, 82 insertions(+), 109 deletions(-)
> > >
> > > diff --git a/hw/ppc/ppc.c b/hw/ppc/ppc.c
> > > index a327206a0a1e..b813ef732ec1 100644
> > > --- a/hw/ppc/ppc.c
> > > +++ b/hw/ppc/ppc.c
> > > @@ -37,22 +37,6 @@
> > > #include "migration/vmstate.h"
> > > #include "trace.h"
> > > -//#define PPC_DEBUG_IRQ
> > > -//#define PPC_DEBUG_TB
> > > -
> > > -#ifdef PPC_DEBUG_IRQ
> > > -# define LOG_IRQ(...) qemu_log_mask(CPU_LOG_INT, ## __VA_ARGS__)
> > > -#else
> > > -# define LOG_IRQ(...) do { } while (0)
> > > -#endif
> > > -
> > > -
> > > -#ifdef PPC_DEBUG_TB
> > > -# define LOG_TB(...) qemu_log(__VA_ARGS__)
> > > -#else
> > > -# define LOG_TB(...) do { } while (0)
> > > -#endif
> > > -
> > > static void cpu_ppc_tb_stop (CPUPPCState *env);
> > > static void cpu_ppc_tb_start (CPUPPCState *env);
> > > @@ -86,9 +70,8 @@ void ppc_set_irq(PowerPCCPU *cpu, int n_IRQ, int level)
> > > }
> > > - LOG_IRQ("%s: %p n_IRQ %d level %d => pending %08" PRIx32
> > > - "req %08x\n", __func__, env, n_IRQ, level,
> > > - env->pending_interrupts, CPU(cpu)->interrupt_request);
> > > + trace_ppc_irq_set_exit(env, n_IRQ, level, env->pending_interrupts,
> > > + CPU(cpu)->interrupt_request);
> > > if (locked) {
> > > qemu_mutex_unlock_iothread();
> > > @@ -102,8 +85,8 @@ static void ppc6xx_set_irq(void *opaque, int pin, int
> > > level)
> > > CPUPPCState *env = &cpu->env;
> > > int cur_level;
> > > - LOG_IRQ("%s: env %p pin %d level %d\n", __func__,
> > > - env, pin, level);
> > > + trace_ppc_irq_set(env, pin, level);
> > > +
> > > cur_level = (env->irq_input_state >> pin) & 1;
> > > /* Don't generate spurious events */
> > > if ((cur_level == 1 && level == 0) || (cur_level == 0 && level !=
> > > 0)) {
> > > @@ -112,8 +95,7 @@ static void ppc6xx_set_irq(void *opaque, int pin, int
> > > level)
> > > switch (pin) {
> > > case PPC6xx_INPUT_TBEN:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: %s the time base\n",
> > > - __func__, level ? "start" : "stop");
> > > + trace_ppc_irq_set_state("time base", level);
> > > if (level) {
> > > cpu_ppc_tb_start(env);
> > > } else {
> > > @@ -122,14 +104,12 @@ static void ppc6xx_set_irq(void *opaque, int pin,
> > > int level)
> > > break;
> > > case PPC6xx_INPUT_INT:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the external IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("external IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_EXT, level);
> > > break;
> > > case PPC6xx_INPUT_SMI:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the SMI IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("SMI IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_SMI, level);
> > > break;
> > > case PPC6xx_INPUT_MCP:
> > > @@ -138,8 +118,7 @@ static void ppc6xx_set_irq(void *opaque, int pin, int
> > > level)
> > > * 603/604/740/750: check HID0[EMCP]
> > > */
> > > if (cur_level == 1 && level == 0) {
> > > - LOG_IRQ("%s: raise machine check state\n",
> > > - __func__);
> > > + trace_ppc_irq_set_state("machine check", 1);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_MCK, 1);
> > > }
> > > break;
> > > @@ -148,20 +127,19 @@ static void ppc6xx_set_irq(void *opaque, int pin,
> > > int level)
> > > /* XXX: TODO: relay the signal to CKSTP_OUT pin */
> > > /* XXX: Note that the only way to restart the CPU is to
> > > reset it */
> > > if (level) {
> > > - LOG_IRQ("%s: stop the CPU\n", __func__);
> > > + trace_ppc_irq_cpu("stop");
> > > cs->halted = 1;
> > > }
> > > break;
> > > case PPC6xx_INPUT_HRESET:
> > > /* Level sensitive - active low */
> > > if (level) {
> > > - LOG_IRQ("%s: reset the CPU\n", __func__);
> > > + trace_ppc_irq_reset("CPU");
> > > cpu_interrupt(cs, CPU_INTERRUPT_RESET);
> > > }
> > > break;
> > > case PPC6xx_INPUT_SRESET:
> > > - LOG_IRQ("%s: set the RESET IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("RESET IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_RESET, level);
> > > break;
> > > default:
> > > @@ -190,8 +168,8 @@ static void ppc970_set_irq(void *opaque, int pin, int
> > > level)
> > > CPUPPCState *env = &cpu->env;
> > > int cur_level;
> > > - LOG_IRQ("%s: env %p pin %d level %d\n", __func__,
> > > - env, pin, level);
> > > + trace_ppc_irq_set(env, pin, level);
> > > +
> > > cur_level = (env->irq_input_state >> pin) & 1;
> > > /* Don't generate spurious events */
> > > if ((cur_level == 1 && level == 0) || (cur_level == 0 && level !=
> > > 0)) {
> > > @@ -200,14 +178,12 @@ static void ppc970_set_irq(void *opaque, int pin,
> > > int level)
> > > switch (pin) {
> > > case PPC970_INPUT_INT:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the external IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("external IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_EXT, level);
> > > break;
> > > case PPC970_INPUT_THINT:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the SMI IRQ state to %d\n", __func__,
> > > - level);
> > > + trace_ppc_irq_set_state("SMI IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_THERM, level);
> > > break;
> > > case PPC970_INPUT_MCP:
> > > @@ -216,8 +192,7 @@ static void ppc970_set_irq(void *opaque, int pin, int
> > > level)
> > > * 603/604/740/750: check HID0[EMCP]
> > > */
> > > if (cur_level == 1 && level == 0) {
> > > - LOG_IRQ("%s: raise machine check state\n",
> > > - __func__);
> > > + trace_ppc_irq_set_state("machine check", 1);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_MCK, 1);
> > > }
> > > break;
> > > @@ -225,10 +200,10 @@ static void ppc970_set_irq(void *opaque, int pin,
> > > int level)
> > > /* Level sensitive - active low */
> > > /* XXX: TODO: relay the signal to CKSTP_OUT pin */
> > > if (level) {
> > > - LOG_IRQ("%s: stop the CPU\n", __func__);
> > > + trace_ppc_irq_cpu("stop");
> > > cs->halted = 1;
> > > } else {
> > > - LOG_IRQ("%s: restart the CPU\n", __func__);
> > > + trace_ppc_irq_cpu("restart");
> > > cs->halted = 0;
> > > qemu_cpu_kick(cs);
> > > }
> > > @@ -240,13 +215,11 @@ static void ppc970_set_irq(void *opaque, int pin,
> > > int level)
> > > }
> > > break;
> > > case PPC970_INPUT_SRESET:
> > > - LOG_IRQ("%s: set the RESET IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("RESET IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_RESET, level);
> > > break;
> > > case PPC970_INPUT_TBEN:
> > > - LOG_IRQ("%s: set the TBEN state to %d\n", __func__,
> > > - level);
> > > + trace_ppc_irq_set_state("TBEN IRQ", level);
> > > /* XXX: TODO */
> > > break;
> > > default:
> > > @@ -272,14 +245,12 @@ static void power7_set_irq(void *opaque, int pin,
> > > int level)
> > > {
> > > PowerPCCPU *cpu = opaque;
> > > - LOG_IRQ("%s: env %p pin %d level %d\n", __func__,
> > > - &cpu->env, pin, level);
> > > + trace_ppc_irq_set(&cpu->env, pin, level);
> > > switch (pin) {
> > > case POWER7_INPUT_INT:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the external IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("external IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_EXT, level);
> > > break;
> > > default:
> > > @@ -300,24 +271,22 @@ static void power9_set_irq(void *opaque, int pin,
> > > int level)
> > > {
> > > PowerPCCPU *cpu = opaque;
> > > - LOG_IRQ("%s: env %p pin %d level %d\n", __func__,
> > > - &cpu->env, pin, level);
> > > + trace_ppc_irq_set(&cpu->env, pin, level);
> > > switch (pin) {
> > > case POWER9_INPUT_INT:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the external IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("external IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_EXT, level);
> > > break;
> > > case POWER9_INPUT_HINT:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the external IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("HV external IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_HVIRT, level);
> > > break;
> > > default:
> > > g_assert_not_reached();
> > > + return;
> > > }
> > > }
> > > @@ -393,8 +362,8 @@ static void ppc40x_set_irq(void *opaque, int pin, int
> > > level)
> > > CPUPPCState *env = &cpu->env;
> > > int cur_level;
> > > - LOG_IRQ("%s: env %p pin %d level %d\n", __func__,
> > > - env, pin, level);
> > > + trace_ppc_irq_set(env, pin, level);
> > > +
> > > cur_level = (env->irq_input_state >> pin) & 1;
> > > /* Don't generate spurious events */
> > > if ((cur_level == 1 && level == 0) || (cur_level == 0 && level !=
> > > 0)) {
> > > @@ -403,51 +372,47 @@ static void ppc40x_set_irq(void *opaque, int pin,
> > > int level)
> > > switch (pin) {
> > > case PPC40x_INPUT_RESET_SYS:
> > > if (level) {
> > > - LOG_IRQ("%s: reset the PowerPC system\n",
> > > - __func__);
> > > + trace_ppc_irq_reset("system");
> > > ppc40x_system_reset(cpu);
> > > }
> > > break;
> > > case PPC40x_INPUT_RESET_CHIP:
> > > if (level) {
> > > - LOG_IRQ("%s: reset the PowerPC chip\n", __func__);
> > > + trace_ppc_irq_reset("chip");
> > > ppc40x_chip_reset(cpu);
> > > }
> > > break;
> > > case PPC40x_INPUT_RESET_CORE:
> > > /* XXX: TODO: update DBSR[MRR] */
> > > if (level) {
> > > - LOG_IRQ("%s: reset the PowerPC core\n", __func__);
> > > + trace_ppc_irq_reset("core");
> > > ppc40x_core_reset(cpu);
> > > }
> > > break;
> > > case PPC40x_INPUT_CINT:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the critical IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("critical IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_CEXT, level);
> > > break;
> > > case PPC40x_INPUT_INT:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the external IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("external IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_EXT, level);
> > > break;
> > > case PPC40x_INPUT_HALT:
> > > /* Level sensitive - active low */
> > > if (level) {
> > > - LOG_IRQ("%s: stop the CPU\n", __func__);
> > > + trace_ppc_irq_cpu("stop");
> > > cs->halted = 1;
> > > } else {
> > > - LOG_IRQ("%s: restart the CPU\n", __func__);
> > > + trace_ppc_irq_cpu("restart");
> > > cs->halted = 0;
> > > qemu_cpu_kick(cs);
> > > }
> > > break;
> > > case PPC40x_INPUT_DEBUG:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the debug pin state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("debug pin", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_DEBUG, level);
> > > break;
> > > default:
> > > @@ -475,41 +440,37 @@ static void ppce500_set_irq(void *opaque, int pin,
> > > int level)
> > > CPUPPCState *env = &cpu->env;
> > > int cur_level;
> > > - LOG_IRQ("%s: env %p pin %d level %d\n", __func__,
> > > - env, pin, level);
> > > + trace_ppc_irq_set(env, pin, level);
> > > +
> > > cur_level = (env->irq_input_state >> pin) & 1;
> > > /* Don't generate spurious events */
> > > if ((cur_level == 1 && level == 0) || (cur_level == 0 && level !=
> > > 0)) {
> > > switch (pin) {
> > > case PPCE500_INPUT_MCK:
> > > if (level) {
> > > - LOG_IRQ("%s: reset the PowerPC system\n",
> > > - __func__);
> > > + trace_ppc_irq_reset("system");
> > > qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
> > > }
> > > break;
> > > case PPCE500_INPUT_RESET_CORE:
> > > if (level) {
> > > - LOG_IRQ("%s: reset the PowerPC core\n", __func__);
> > > + trace_ppc_irq_reset("core");
> > > ppc_set_irq(cpu, PPC_INTERRUPT_MCK, level);
> > > }
> > > break;
> > > case PPCE500_INPUT_CINT:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the critical IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("critical IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_CEXT, level);
> > > break;
> > > case PPCE500_INPUT_INT:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the core IRQ state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("core IRQ", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_EXT, level);
> > > break;
> > > case PPCE500_INPUT_DEBUG:
> > > /* Level sensitive - active high */
> > > - LOG_IRQ("%s: set the debug pin state to %d\n",
> > > - __func__, level);
> > > + trace_ppc_irq_set_state("debug pin", level);
> > > ppc_set_irq(cpu, PPC_INTERRUPT_DEBUG, level);
> > > break;
> > > default:
> > > @@ -564,7 +525,7 @@ uint64_t cpu_ppc_load_tbl (CPUPPCState *env)
> > > }
> > > tb = cpu_ppc_get_tb(tb_env, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
> > > tb_env->tb_offset);
> > > - LOG_TB("%s: tb %016" PRIx64 "\n", __func__, tb);
> > > + trace_ppc_tb_load(tb);
> > > return tb;
> > > }
> > > @@ -575,7 +536,7 @@ static inline uint32_t _cpu_ppc_load_tbu(CPUPPCState
> > > *env)
> > > uint64_t tb;
> > > tb = cpu_ppc_get_tb(tb_env, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
> > > tb_env->tb_offset);
> > > - LOG_TB("%s: tb %016" PRIx64 "\n", __func__, tb);
> > > + trace_ppc_tb_load(tb);
> > > return tb >> 32;
> > > }
> > > @@ -595,8 +556,7 @@ static inline void cpu_ppc_store_tb(ppc_tb_t *tb_env,
> > > uint64_t vmclk,
> > > *tb_offsetp = value -
> > > muldiv64(vmclk, tb_env->tb_freq, NANOSECONDS_PER_SECOND);
> > > - LOG_TB("%s: tb %016" PRIx64 " offset %08" PRIx64 "\n",
> > > - __func__, value, *tb_offsetp);
> > > + trace_ppc_tb_store(value, *tb_offsetp);
> > > }
> > > void cpu_ppc_store_tbl (CPUPPCState *env, uint32_t value)
> > > @@ -632,7 +592,7 @@ uint64_t cpu_ppc_load_atbl (CPUPPCState *env)
> > > uint64_t tb;
> > > tb = cpu_ppc_get_tb(tb_env, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
> > > tb_env->atb_offset);
> > > - LOG_TB("%s: tb %016" PRIx64 "\n", __func__, tb);
> > > + trace_ppc_tb_load(tb);
> > > return tb;
> > > }
> > > @@ -643,7 +603,7 @@ uint32_t cpu_ppc_load_atbu (CPUPPCState *env)
> > > uint64_t tb;
> > > tb = cpu_ppc_get_tb(tb_env, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
> > > tb_env->atb_offset);
> > > - LOG_TB("%s: tb %016" PRIx64 "\n", __func__, tb);
> > > + trace_ppc_tb_load(tb);
> > > return tb >> 32;
> > > }
> > > @@ -762,7 +722,7 @@ static inline int64_t _cpu_ppc_load_decr(CPUPPCState
> > > *env, uint64_t next)
> > > } else {
> > > decr = -muldiv64(-diff, tb_env->decr_freq,
> > > NANOSECONDS_PER_SECOND);
> > > }
> > > - LOG_TB("%s: %016" PRIx64 "\n", __func__, decr);
> > > + trace_ppc_decr_load(decr);
> > > return decr;
> > > }
> > > @@ -821,7 +781,7 @@ uint64_t cpu_ppc_load_purr (CPUPPCState *env)
> > > static inline void cpu_ppc_decr_excp(PowerPCCPU *cpu)
> > > {
> > > /* Raise it */
> > > - LOG_TB("raise decrementer exception\n");
> > > + trace_ppc_decr_excp("raise");
> > > ppc_set_irq(cpu, PPC_INTERRUPT_DECR, 1);
> > > }
> > > @@ -835,7 +795,7 @@ static inline void cpu_ppc_hdecr_excp(PowerPCCPU *cpu)
> > > CPUPPCState *env = &cpu->env;
> > > /* Raise it */
> > > - LOG_TB("raise hv decrementer exception\n");
> > > + trace_ppc_decr_excp("raise HV");
> > > /* The architecture specifies that we don't deliver HDEC
> > > * interrupts in a PM state. Not only they don't cause a
> > > @@ -870,8 +830,7 @@ static void __cpu_ppc_store_decr(PowerPCCPU *cpu,
> > > uint64_t *nextp,
> > > value |= (0xFFFFFFFFULL << nr_bits);
> > > }
> > > - LOG_TB("%s: " TARGET_FMT_lx " => " TARGET_FMT_lx "\n", __func__,
> > > - decr, value);
> > > + trace_ppc_decr_store(nr_bits, decr, value);
> > > if (kvm_enabled()) {
> > > /* KVM handles decrementer exceptions, we don't need our own
> > > timer */
> > > @@ -1199,9 +1158,8 @@ static void cpu_4xx_fit_cb (void *opaque)
> > > if ((env->spr[SPR_40x_TCR] >> 23) & 0x1) {
> > > ppc_set_irq(cpu, PPC_INTERRUPT_FIT, 1);
> > > }
> > > - LOG_TB("%s: ir %d TCR " TARGET_FMT_lx " TSR " TARGET_FMT_lx "\n",
> > > __func__,
> > > - (int)((env->spr[SPR_40x_TCR] >> 23) & 0x1),
> > > - env->spr[SPR_40x_TCR], env->spr[SPR_40x_TSR]);
> > > + trace_ppc4xx_fit((int)((env->spr[SPR_40x_TCR] >> 23) & 0x1),
> > > + env->spr[SPR_40x_TCR], env->spr[SPR_40x_TSR]);
> > > }
> > > /* Programmable interval timer */
> > > @@ -1215,11 +1173,10 @@ static void start_stop_pit (CPUPPCState *env,
> > > ppc_tb_t *tb_env, int is_excp)
> > > !((env->spr[SPR_40x_TCR] >> 26) & 0x1) ||
> > > (is_excp && !((env->spr[SPR_40x_TCR] >> 22) & 0x1))) {
> > > /* Stop PIT */
> > > - LOG_TB("%s: stop PIT\n", __func__);
> > > + trace_ppc4xx_pit_stop();
> > > timer_del(tb_env->decr_timer);
> > > } else {
> > > - LOG_TB("%s: start PIT %016" PRIx64 "\n",
> > > - __func__, ppc40x_timer->pit_reload);
> > > + trace_ppc4xx_pit_start(ppc40x_timer->pit_reload);
> > > now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
> > > next = now + muldiv64(ppc40x_timer->pit_reload,
> > > NANOSECONDS_PER_SECOND,
> > > tb_env->decr_freq);
> > > @@ -1248,9 +1205,7 @@ static void cpu_4xx_pit_cb (void *opaque)
> > > ppc_set_irq(cpu, ppc40x_timer->decr_excp, 1);
> > > }
> > > start_stop_pit(env, tb_env, 1);
> > > - LOG_TB("%s: ar %d ir %d TCR " TARGET_FMT_lx " TSR " TARGET_FMT_lx " "
> > > - "%016" PRIx64 "\n", __func__,
> > > - (int)((env->spr[SPR_40x_TCR] >> 22) & 0x1),
> > > + trace_ppc4xx_pit((int)((env->spr[SPR_40x_TCR] >> 22) & 0x1),
> > > (int)((env->spr[SPR_40x_TCR] >> 26) & 0x1),
> > > env->spr[SPR_40x_TCR], env->spr[SPR_40x_TSR],
> > > ppc40x_timer->pit_reload);
> > > @@ -1290,8 +1245,7 @@ static void cpu_4xx_wdt_cb (void *opaque)
> > > next = now + muldiv64(next, NANOSECONDS_PER_SECOND,
> > > tb_env->decr_freq);
> > > if (next == now)
> > > next++;
> > > - LOG_TB("%s: TCR " TARGET_FMT_lx " TSR " TARGET_FMT_lx "\n", __func__,
> > > - env->spr[SPR_40x_TCR], env->spr[SPR_40x_TSR]);
> > > + trace_ppc4xx_wdt(env->spr[SPR_40x_TCR], env->spr[SPR_40x_TSR]);
> > > switch ((env->spr[SPR_40x_TSR] >> 30) & 0x3) {
> > > case 0x0:
> > > case 0x1:
> > > @@ -1334,7 +1288,7 @@ void store_40x_pit (CPUPPCState *env, target_ulong
> > > val)
> > > tb_env = env->tb_env;
> > > ppc40x_timer = tb_env->opaque;
> > > - LOG_TB("%s val" TARGET_FMT_lx "\n", __func__, val);
> > > + trace_ppc40x_store_pit(val);
> > > ppc40x_timer->pit_reload = val;
> > > start_stop_pit(env, tb_env, 0);
> > > }
> > > @@ -1349,8 +1303,7 @@ static void ppc_40x_set_tb_clk (void *opaque,
> > > uint32_t freq)
> > > CPUPPCState *env = opaque;
> > > ppc_tb_t *tb_env = env->tb_env;
> > > - LOG_TB("%s set new frequency to %" PRIu32 "\n", __func__,
> > > - freq);
> > > + trace_ppc40x_set_tb_clk(freq);
> > > tb_env->tb_freq = freq;
> > > tb_env->decr_freq = freq;
> > > /* XXX: we should also update all timers */
> > > @@ -1369,7 +1322,7 @@ clk_setup_cb ppc_40x_timers_init (CPUPPCState *env,
> > > uint32_t freq,
> > > tb_env->tb_freq = freq;
> > > tb_env->decr_freq = freq;
> > > tb_env->opaque = ppc40x_timer;
> > > - LOG_TB("%s freq %" PRIu32 "\n", __func__, freq);
> > > + trace_ppc40x_timers_init(freq);
> > > if (ppc40x_timer != NULL) {
> > > /* We use decr timer for PIT */
> > > tb_env->decr_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
> > > &cpu_4xx_pit_cb, env);
> > > diff --git a/hw/ppc/trace-events b/hw/ppc/trace-events
> > > index da6e74b80dc1..3bf43fa340fe 100644
> > > --- a/hw/ppc/trace-events
> > > +++ b/hw/ppc/trace-events
> > > @@ -97,7 +97,27 @@ vof_claimed(uint64_t start, uint64_t end, uint64_t
> > > size) "0x%"PRIx64"..0x%"PRIx6
> > > # ppc.c
> > > ppc_tb_adjust(uint64_t offs1, uint64_t offs2, int64_t diff, int64_t
> > > seconds) "adjusted from 0x%"PRIx64" to 0x%"PRIx64", diff %"PRId64"
> > > (%"PRId64"s)"
> > > -
> > > +ppc_tb_load(uint64_t tb) "tb 0x%016" PRIx64
> > > +ppc_tb_store(uint64_t tb, uint64_t offset) "tb 0x%016" PRIx64 " offset
> > > 0x%08" PRIx64
> > > +
> > > +ppc_decr_load(uint64_t tb) "decr 0x%016" PRIx64
> > > +ppc_decr_excp(const char *action) "%s decrementer"
> > > +ppc_decr_store(uint32_t nr_bits, uint64_t decr, uint64_t value) "%d-bit
> > > 0x%016" PRIx64 " => 0x%016" PRIx64
> > > +
> > > +ppc4xx_fit(uint32_t ir, uint64_t tcr, uint64_t tsr) "ir %d TCR 0x%"
> > > PRIx64 " TSR 0x%" PRIx64
> > > +ppc4xx_pit_stop(void) ""
> > > +ppc4xx_pit_start(uint64_t reload) "PIT 0x%016" PRIx64
> > > +ppc4xx_pit(uint32_t ar, uint32_t ir, uint64_t tcr, uint64_t tsr,
> > > uint64_t reload) "ar %d ir %d TCR 0x%" PRIx64 " TSR 0x%" PRIx64 " PIT
> > > 0x%016" PRIx64
> > > +ppc4xx_wdt(uint64_t tcr, uint64_t tsr) "TCR 0x%" PRIx64 " TSR 0x%" PRIx64
> > > +ppc40x_store_pit(uint64_t value) "val 0x%" PRIx64
> > > +ppc40x_set_tb_clk(uint32_t value) "new frequency %" PRIu32
> > > +ppc40x_timers_init(uint32_t value) "frequency %" PRIu32
> > > +
> > > +ppc_irq_set(void *env, uint32_t pin, uint32_t level) "env [%p] pin %d
> > > level %d"
> > > +ppc_irq_set_exit(void *env, uint32_t n_IRQ, uint32_t level, uint32_t
> > > pending, uint32_t request) "env [%p] n_IRQ %d level %d => pending 0x%08"
> > > PRIx32 " req 0x%08" PRIx32
> > > +ppc_irq_set_state(const char *name, uint32_t level) "\"%s\" level %d"
> > > +ppc_irq_reset(const char *name) "%s"
> > > +ppc_irq_cpu(const char *action) "%s"
> > > # prep_systemio.c
> > > prep_systemio_read(uint32_t addr, uint32_t val) "read addr=0x%x
> > > val=0x%x"
> >
>
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature