[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 20/91] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12)
From: |
Michael S. Tsirkin |
Subject: |
[PULL 20/91] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12) |
Date: |
Mon, 16 May 2022 06:36:43 -0400 |
From: Ben Widawsky <ben.widawsky@intel.com>
A device's volatile and persistent memory are known Host Defined Memory
(HDM) regions. The mechanism by which the device is programmed to claim
the addresses associated with those regions is through dedicated logic
known as the HDM decoder. In order to allow the OS to properly program
the HDMs, the HDM decoders must be modeled.
There are two ways the HDM decoders can be implemented, the legacy
mechanism is through the PCIe DVSEC programming from CXL 1.1 (8.1.3.8),
and MMIO is found in 8.2.5.12 of the spec. For now, 8.1.3.8 is not
implemented.
Much of CXL device logic is implemented in cxl-utils. The HDM decoder
however is implemented directly by the device implementation.
Whilst the implementation currently does no validity checks on the
encoder set up, future work will add sanity checking specific to
the type of cxl component.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-19-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/mem/cxl_type3.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 290c088dd6..318b6f9fbc 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -52,6 +52,48 @@ static void build_dvsecs(CXLType3Dev *ct3d)
GPF_DEVICE_DVSEC_REVID, dvsec);
}
+static void hdm_decoder_commit(CXLType3Dev *ct3d, int which)
+{
+ ComponentRegisters *cregs = &ct3d->cxl_cstate.crb;
+ uint32_t *cache_mem = cregs->cache_mem_registers;
+
+ assert(which == 0);
+
+ /* TODO: Sanity checks that the decoder is possible */
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMIT, 0);
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, ERR, 0);
+
+ ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
+}
+
+static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
+ unsigned size)
+{
+ CXLComponentState *cxl_cstate = opaque;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ CXLType3Dev *ct3d = container_of(cxl_cstate, CXLType3Dev, cxl_cstate);
+ uint32_t *cache_mem = cregs->cache_mem_registers;
+ bool should_commit = false;
+ int which_hdm = -1;
+
+ assert(size == 4);
+ g_assert(offset < CXL2_COMPONENT_CM_REGION_SIZE);
+
+ switch (offset) {
+ case A_CXL_HDM_DECODER0_CTRL:
+ should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
+ which_hdm = 0;
+ break;
+ default:
+ break;
+ }
+
+ stl_le_p((uint8_t *)cache_mem + offset, value);
+ if (should_commit) {
+ hdm_decoder_commit(ct3d, which_hdm);
+ }
+}
+
static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
{
MemoryRegion *mr;
@@ -95,6 +137,9 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
ct3d->cxl_cstate.pdev = pci_dev;
build_dvsecs(ct3d);
+ regs->special_ops = g_new0(MemoryRegionOps, 1);
+ regs->special_ops->write = ct3d_reg_write;
+
cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
TYPE_CXL_TYPE3);
@@ -109,6 +154,15 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
&ct3d->cxl_dstate.device_registers);
}
+static void ct3_exit(PCIDevice *pci_dev)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(pci_dev);
+ CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+ ComponentRegisters *regs = &cxl_cstate->crb;
+
+ g_free(regs->special_ops);
+}
+
static void ct3d_reset(DeviceState *dev)
{
CXLType3Dev *ct3d = CXL_TYPE3(dev);
@@ -131,6 +185,7 @@ static void ct3_class_init(ObjectClass *oc, void *data)
PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc);
pc->realize = ct3_realize;
+ pc->exit = ct3_exit;
pc->class_id = PCI_CLASS_STORAGE_EXPRESS;
pc->vendor_id = PCI_VENDOR_ID_INTEL;
pc->device_id = 0xd93; /* LVF for now */
--
MST
- [PULL 11/91] hw/cxl/device: Timestamp implementation (8.2.9.3), (continued)
- [PULL 11/91] hw/cxl/device: Timestamp implementation (8.2.9.3), Michael S. Tsirkin, 2022/05/16
- [PULL 10/91] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1), Michael S. Tsirkin, 2022/05/16
- [PULL 12/91] hw/cxl/device: Add log commands (8.2.9.4) + CEL, Michael S. Tsirkin, 2022/05/16
- [PULL 13/91] hw/pxb: Use a type for realizing expanders, Michael S. Tsirkin, 2022/05/16
- [PULL 14/91] hw/pci/cxl: Create a CXL bus type, Michael S. Tsirkin, 2022/05/16
- [PULL 15/91] cxl: Machine level control on whether CXL support is enabled, Michael S. Tsirkin, 2022/05/16
- [PULL 17/91] qtest/cxl: Introduce initial test for pxb-cxl only., Michael S. Tsirkin, 2022/05/16
- [PULL 16/91] hw/pxb: Allow creation of a CXL PXB (host bridge), Michael S. Tsirkin, 2022/05/16
- [PULL 18/91] hw/cxl/rp: Add a root port, Michael S. Tsirkin, 2022/05/16
- [PULL 19/91] hw/cxl/device: Add a memory device (8.2.8.5), Michael S. Tsirkin, 2022/05/16
- [PULL 20/91] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12),
Michael S. Tsirkin <=
- [PULL 21/91] hw/cxl/device: Add some trivial commands, Michael S. Tsirkin, 2022/05/16
- [PULL 22/91] hw/cxl/device: Plumb real Label Storage Area (LSA) sizing, Michael S. Tsirkin, 2022/05/16
- [PULL 23/91] hw/cxl/device: Implement get/set Label Storage Area (LSA), Michael S. Tsirkin, 2022/05/16
- [PULL 24/91] qtests/cxl: Add initial root port and CXL type3 tests, Michael S. Tsirkin, 2022/05/16
- [PULL 25/91] hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142), Michael S. Tsirkin, 2022/05/16
- [PULL 26/91] acpi/cxl: Add _OSC implementation (9.14.2), Michael S. Tsirkin, 2022/05/16
- [PULL 27/91] acpi/cxl: Create the CEDT (9.14.1), Michael S. Tsirkin, 2022/05/16
- [PULL 28/91] hw/cxl/component: Add utils for interleave parameter encoding/decoding, Michael S. Tsirkin, 2022/05/16
- [PULL 29/91] hw/cxl/host: Add support for CXL Fixed Memory Windows., Michael S. Tsirkin, 2022/05/16
- [PULL 30/91] acpi/cxl: Introduce CFMWS structures in CEDT, Michael S. Tsirkin, 2022/05/16