[PULL 54/60] ppc/ppc405: Use an explicit I2C object

[Daniel Henrique Barboza]

From: Cédric Le Goater <clg@kaod.org>

Having an explicit I2C model object will help if one day we want to
add I2C devices on the bus from the machine init routine.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[balaton: Symplify sysbus device casts for readibility]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: 
<68eb8b5ac408ca8cc981ebf53a3e154c0d34c7f6.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
 hw/ppc/ppc405.h    |  2 ++
 hw/ppc/ppc405_uc.c | 10 ++++++++--
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/hw/ppc/ppc405.h b/hw/ppc/ppc405.h
index 67f4c14f50..efa29fdfb1 100644
--- a/hw/ppc/ppc405.h
+++ b/hw/ppc/ppc405.h
@@ -28,6 +28,7 @@
 #include "qom/object.h"
 #include "hw/ppc/ppc4xx.h"
 #include "hw/intc/ppc-uic.h"
+#include "hw/i2c/ppc4xx_i2c.h"
 
 #define PPC405EP_SDRAM_BASE 0x00000000
 #define PPC405EP_NVRAM_BASE 0xF0000000
@@ -215,6 +216,7 @@ struct Ppc405SoCState {
     Ppc405OcmState ocm;
     Ppc405GpioState gpio;
     Ppc405DmaState dma;
+    PPC4xxI2CState i2c;
     Ppc4xxEbcState ebc;
     Ppc405OpbaState opba;
     Ppc405PobState pob;
diff --git a/hw/ppc/ppc405_uc.c b/hw/ppc/ppc405_uc.c
index dc17d5bdb5..189f49a138 100644
--- a/hw/ppc/ppc405_uc.c
+++ b/hw/ppc/ppc405_uc.c
@@ -1096,6 +1096,8 @@ static void ppc405_soc_instance_init(Object *obj)
 
     object_initialize_child(obj, "dma", &s->dma, TYPE_PPC405_DMA);
 
+    object_initialize_child(obj, "i2c", &s->i2c, TYPE_PPC4xx_I2C);
+
     object_initialize_child(obj, "ebc", &s->ebc, TYPE_PPC4xx_EBC);
 
     object_initialize_child(obj, "opba", &s->opba, TYPE_PPC405_OPBA);
@@ -1188,8 +1190,12 @@ static void ppc405_soc_realize(DeviceState *dev, Error 
**errp)
     }
 
     /* I2C controller */
-    sysbus_create_simple(TYPE_PPC4xx_I2C, 0xef600500,
-                         qdev_get_gpio_in(DEVICE(&s->uic), 2));
+    sbd = SYS_BUS_DEVICE(&s->i2c);
+    if (!sysbus_realize(sbd, errp)) {
+        return;
+    }
+    sysbus_mmio_map(sbd, 0, 0xef600500);
+    sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(DEVICE(&s->uic), 2));
 
     /* GPIO */
     sbd = SYS_BUS_DEVICE(&s->gpio);
-- 
2.37.2