[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 072/102] ppc/ppc405: Change default PLL values at reset
From: |
Cédric Le Goater |
Subject: |
[PULL 072/102] ppc/ppc405: Change default PLL values at reset |
Date: |
Wed, 15 Dec 2021 18:03:27 +0100 |
These values are computed and updated by U-Boot at startup. Use them
as defaults to improve direct Linux boot.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211206103712.1866296-13-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
hw/ppc/ppc405_uc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/hw/ppc/ppc405_uc.c b/hw/ppc/ppc405_uc.c
index 303af584443d..2a1e2d71b08b 100644
--- a/hw/ppc/ppc405_uc.c
+++ b/hw/ppc/ppc405_uc.c
@@ -1381,9 +1381,9 @@ static void ppc405ep_cpc_reset (void *opaque)
cpc->boot = 0x00000010; /* Boot from PCI - IIC EEPROM disabled */
cpc->epctl = 0x00000000;
- cpc->pllmr[0] = 0x00011010;
- cpc->pllmr[1] = 0x40000000;
- cpc->ucr = 0x00000000;
+ cpc->pllmr[0] = 0x00021002;
+ cpc->pllmr[1] = 0x80a552be;
+ cpc->ucr = 0x00004646;
cpc->srr = 0x00040000;
cpc->pci = 0x00000000;
cpc->er = 0x00000000;
--
2.31.1
- [PULL 043/102] target/ppc: Update sqrt for new flags, (continued)
- [PULL 043/102] target/ppc: Update sqrt for new flags, Cédric Le Goater, 2021/12/15
- [PULL 045/102] target/ppc: Update fre to new flags, Cédric Le Goater, 2021/12/15
- [PULL 057/102] target/ppc: Fix MPCxxx FPU interrupt address, Cédric Le Goater, 2021/12/15
- [PULL 068/102] ppc/ppc405: Remove flash support, Cédric Le Goater, 2021/12/15
- [PULL 070/102] ppc/ppc405: Introduce ppc405_set_default_bootinfo(), Cédric Le Goater, 2021/12/15
- [PULL 075/102] target/ppc: Fix xs{max, min}[cj]dp to use VSX registers, Cédric Le Goater, 2021/12/15
- [PULL 080/102] Revert "target/ppc: Move SPR_DSISR setting to powerpc_excp", Cédric Le Goater, 2021/12/15
- [PULL 059/102] target/ppc: Set 601v exception model id, Cédric Le Goater, 2021/12/15
- [PULL 067/102] ppc/ppc405: Add some address space definitions, Cédric Le Goater, 2021/12/15
- [PULL 061/102] ppc/ppc405: Change kernel load address, Cédric Le Goater, 2021/12/15
- [PULL 072/102] ppc/ppc405: Change default PLL values at reset,
Cédric Le Goater <=
- [PULL 073/102] ppc/ppc405: Fix bi_pci_enetaddr2 field in U-Boot board information, Cédric Le Goater, 2021/12/15
- [PULL 065/102] ppc/ppc405: Drop flag parameter in ppc405_set_bootinfo(), Cédric Le Goater, 2021/12/15
- [PULL 069/102] ppc/ppc405: Rework FW load, Cédric Le Goater, 2021/12/15
- [PULL 071/102] ppc/ppc405: Fix boot from kernel, Cédric Le Goater, 2021/12/15
- [PULL 074/102] ppc/ppc405: Add update of bi_procfreq field, Cédric Le Goater, 2021/12/15
- [PULL 078/102] target/ppc: move xscvqpdp to decodetree, Cédric Le Goater, 2021/12/15
- [PULL 077/102] target/ppc: fix xscvqpdp register access, Cédric Le Goater, 2021/12/15
- [PULL 082/102] target/ppc: introduce PMUEventType and PMU overflow timers, Cédric Le Goater, 2021/12/15
- [PULL 086/102] target/ppc: enable PMU counter overflow with cycle events, Cédric Le Goater, 2021/12/15
- [PULL 079/102] target/ppc: Fix e6500 boot, Cédric Le Goater, 2021/12/15