[PULL 086/102] target/ppc: enable PMU counter overflow with cycle events

[Cédric Le Goater]

From: Daniel Henrique Barboza <danielhb413@gmail.com>

The PowerISA v3.1 defines that if the proper bits are set (MMCR0_PMC1CE
for PMC1 and MMCR0_PMCjCE for the remaining PMCs), counter negative
conditions are enabled. This means that if the counter value overflows
(i.e. exceeds 0x80000000) a performance monitor alert will occur. This alert
can trigger an event-based exception (to be implemented in the next patches)
if the MMCR0_EBE bit is set.

For now, overflowing the counter when the PMC is counting cycles will
just trigger a performance monitor alert. This is done by starting the
overflow timer to expire in the moment the overflow would be occuring. The
timer will call fire_PMC_interrupt() (via cpu_ppc_pmu_timer_cb) which will
trigger the PMU alert and, if the conditions are met, an EBB exception.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 target/ppc/cpu.h        |  2 ++
 target/ppc/power8-pmu.c | 71 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 73 insertions(+)

diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index 69cfb2e5f930..cf637f0f6dfb 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -363,6 +363,8 @@ typedef enum {
 #define MMCR0_PMCC   PPC_BITMASK(44, 45) /* PMC Control */
 #define MMCR0_FC14   PPC_BIT(58)         /* PMC Freeze Counters 1-4 bit */
 #define MMCR0_FC56   PPC_BIT(59)         /* PMC Freeze Counters 5-6 bit */
+#define MMCR0_PMC1CE PPC_BIT(48)         /* MMCR0 PMC1 Condition Enabled */
+#define MMCR0_PMCjCE PPC_BIT(49)         /* MMCR0 PMCj Condition Enabled */
 /* MMCR0 userspace r/w mask */
 #define MMCR0_UREG_MASK (MMCR0_FC | MMCR0_PMAO | MMCR0_PMAE)
 /* MMCR2 userspace r/w mask */
diff --git a/target/ppc/power8-pmu.c b/target/ppc/power8-pmu.c
index 73252529beee..399234a2fce8 100644
--- a/target/ppc/power8-pmu.c
+++ b/target/ppc/power8-pmu.c
@@ -23,6 +23,8 @@
 
 #if defined(TARGET_PPC64) && !defined(CONFIG_USER_ONLY)
 
+#define PMC_COUNTER_NEGATIVE_VAL 0x80000000UL
+
 static bool pmc_is_inactive(CPUPPCState *env, int sprn)
 {
     if (env->spr[SPR_POWER_MMCR0] & MMCR0_FC) {
@@ -36,6 +38,15 @@ static bool pmc_is_inactive(CPUPPCState *env, int sprn)
     return env->spr[SPR_POWER_MMCR0] & MMCR0_FC56;
 }
 
+static bool pmc_has_overflow_enabled(CPUPPCState *env, int sprn)
+{
+    if (sprn == SPR_POWER_PMC1) {
+        return env->spr[SPR_POWER_MMCR0] & MMCR0_PMC1CE;
+    }
+
+    return env->spr[SPR_POWER_MMCR0] & MMCR0_PMCjCE;
+}
+
 /*
  * For PMCs 1-4, IBM POWER chips has support for an implementation
  * dependent event, 0x1E, that enables cycle counting. The Linux kernel
@@ -123,6 +134,61 @@ static void pmu_update_cycles(CPUPPCState *env)
     env->pmu_base_time = now;
 }
 
+/*
+ * Helper function to retrieve the cycle overflow timer of the
+ * 'sprn' counter.
+ */
+static QEMUTimer *get_cyc_overflow_timer(CPUPPCState *env, int sprn)
+{
+    return env->pmu_cyc_overflow_timers[sprn - SPR_POWER_PMC1];
+}
+
+static void pmc_update_overflow_timer(CPUPPCState *env, int sprn)
+{
+    QEMUTimer *pmc_overflow_timer = get_cyc_overflow_timer(env, sprn);
+    int64_t timeout;
+
+    /*
+     * PMC5 does not have an overflow timer and this pointer
+     * will be NULL.
+     */
+    if (!pmc_overflow_timer) {
+        return;
+    }
+
+    if (pmc_get_event(env, sprn) != PMU_EVENT_CYCLES ||
+        !pmc_has_overflow_enabled(env, sprn)) {
+        /* Overflow timer is not needed for this counter */
+        timer_del(pmc_overflow_timer);
+        return;
+    }
+
+    if (env->spr[sprn] >= PMC_COUNTER_NEGATIVE_VAL) {
+        timeout =  0;
+    } else {
+        timeout = PMC_COUNTER_NEGATIVE_VAL - env->spr[sprn];
+    }
+
+    /*
+     * Use timer_mod_anticipate() because an overflow timer might
+     * be already running for this PMC.
+     */
+    timer_mod_anticipate(pmc_overflow_timer, env->pmu_base_time + timeout);
+}
+
+static void pmu_update_overflow_timers(CPUPPCState *env)
+{
+    int sprn;
+
+    /*
+     * Scroll through all PMCs and start counter overflow timers for
+     * PM_CYC events, if needed.
+     */
+    for (sprn = SPR_POWER_PMC1; sprn <= SPR_POWER_PMC6; sprn++) {
+        pmc_update_overflow_timer(env, sprn);
+    }
+}
+
 void helper_store_mmcr0(CPUPPCState *env, target_ulong value)
 {
     pmu_update_cycles(env);
@@ -131,6 +197,9 @@ void helper_store_mmcr0(CPUPPCState *env, target_ulong 
value)
 
     /* MMCR0 writes can change HFLAGS_PMCCCLEAR */
     hreg_compute_hflags(env);
+
+    /* Update cycle overflow timers with the current MMCR0 state */
+    pmu_update_overflow_timers(env);
 }
 
 void helper_store_mmcr1(CPUPPCState *env, uint64_t value)
@@ -152,6 +221,8 @@ void helper_store_pmc(CPUPPCState *env, uint32_t sprn, 
uint64_t value)
     pmu_update_cycles(env);
 
     env->spr[sprn] = value;
+
+    pmc_update_overflow_timer(env, sprn);
 }
 
 static void fire_PMC_interrupt(PowerPCCPU *cpu)
-- 
2.31.1