[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Tetuhi-vgs] Fwd: Tetuhi-vgs post from address@hidden requires approval

From: Douglas Bagnall
Subject: [Tetuhi-vgs] Fwd: Tetuhi-vgs post from address@hidden requires approval
Date: Mon, 18 Aug 2008 17:15:04 +1200

framebuffer problem

Robert Carter <address@hidden> wrote the following but it
got caught up in the mailman post approval system so you won't have
seen it yet:

> Hi Everyone,
> I've been able to compile tetuhi, but I have a problem with the
> frame buffer. Initially directfb did not detect the framebuffer
> device /dev/fb0. I added a kernel option like 'vga=791' to activate
> the fbcon framebuffer on startup. This allowed tetuhi to run, but
> with unusual results. The display shows a 'comb' of horizontal scan
> lines which are moving. It looks like the software is working - it
> gives output on STDOUT that looks reasonable. I'm testing this on
> an intel imac with a 'cinema' width display. Perhaps I need to set
> something to tell the software how many bytes per horizontal line,
> or some screen size related environment variable?
> Rob

It sounds like a PyGame/SDL problem, but beyond that I have very
little idea.  The SDL_VIDEODRIVER environment variable might be
useful.  There's some explanation here:


Also the set_mode function further down that page might be relevant.

If you want to try a different size, the variable to change is
WORKING_SIZE in vg/config.py.  Only 768x576 has been tested to any
extent, and be aware that the window size interacts with a number of
other variables; if you change it the games will suck differently.  It
would really be best to stick to multiples of 32 (eg 1024x768 but not

Have you tried the -s / --fullscreen commandline switch?


reply via email to

[Prev in Thread] Current Thread [Next in Thread]