[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [uracoli-devel] description about how to add custom hardware to thep
From: |
axel . wachtler |
Subject: |
Re: [uracoli-devel] description about how to add custom hardware to theproject. |
Date: |
Tue, 19 Jul 2011 09:49:25 +0200 |
Hi Bjoern,
if you do a CVS update, I recently fixed one of the newer scons
scripts (Contrib/Rose/SConscript) and tested the build with a
board.cfg that defines just the rdk23x flavours, it works
stable for "scons boards=..\cb\boards.cfg (-h|-c|all)"
As for the board variations: if you have time to do
Software CRC16 for RX, then you can go with rf230a, this
code will run also on rf230b.
But does incirquit really sell boards with mega128 devices?
I think here you should ask them to exchange at least
this boards with mega1281 assembled boards.
Axel
-------- Original-Nachricht --------
> Datum: Mon, 18 Jul 2011 16:36:33 +0200
> Von: "Riemer, Björn" <address@hidden>
> An: address@hidden, address@hidden
> Betreff: Re: [uracoli-devel] description about how to add custom hardware to
> theproject.
> Hi Axel,
>
> i've tried this, to add new boards, but i can't get it to work.
>
>
> address@hidden:~/src/uracoli-test/uracoli-cvs$ scons
> boards=../customboard/boards.cfg -h
> scons: Reading SConscript files ...
> Running with optimization --max-drift=1,--implicit-deps-unchanged,
> MD5-timestamp and selective rules
>
> scons: *** Export of non-existent variable ''board''
> File "/home/tfh/src/uracoli-test/uracoli-cvs/SConstruct", line 459, in
> <module>
> address@hidden:~/src/uracoli-test/uracoli-cvs$
>
>
> I'm doing this to support the different Incircuit boards which are on my
> desk. They are all labeled v1.2 but use different combinations of
> rf230a, rf230b, atMega1281, atmega128. This is very frustrating :(
>
> Bjoern
>
> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden
> On Behalf Of Axel
> Sent: Freitag, 29. April 2011 22:36
> To: address@hidden
> Subject: [uracoli-devel] description about how to add custom hardware to
> theproject.
>
> Hallo all.
>
> I documented a bit, how to add a custom board to the source tree.
>
> http://uracoli.nongnu.org/custom.html
>
> Cheers Axel
>
>
>