Re: [uracoli-devel] description about how to add custom hardware totheproject.

[Riemer, Björn]

Hi Axel,

this was also my approach i created a new board (icm230_12a) which defines a 
board with mega1281 and rf230a if I put it in the board.cfg then it works.

I think incirquit changed their products (without changing the version) to use 
an mega128. My complete order (20pieces) is equipped with the mega128 cpu. And 
they also changed the website but not the datasheet ;) 
http://www.ic-board.de/product_info.php?info=p64_ICradio-Stick-2-4G.html

Bjoern

-----Original Message-----
From: address@hidden [mailto:address@hidden 
Sent: Dienstag, 19. Juli 2011 09:49
To: Riemer, Björn; address@hidden; address@hidden
Subject: Re: [uracoli-devel] description about how to add custom hardware 
totheproject.

Hi Bjoern,

if you do a CVS update, I recently fixed one of the newer scons scripts 
(Contrib/Rose/SConscript) and tested the build with a board.cfg that defines 
just the rdk23x flavours, it works stable  for "scons boards=..\cb\boards.cfg 
(-h|-c|all)"

As for the board variations: if you have time to do Software CRC16 for RX, then 
you can go with rf230a, this code will run also on rf230b. 

But does incirquit really sell boards with mega128 devices?
I think here you should ask them to exchange at least this boards with mega1281 
assembled boards.

Axel



-------- Original-Nachricht --------
> Datum: Mon, 18 Jul 2011 16:36:33 +0200
> Von: "Riemer, Björn" <address@hidden>
> An: address@hidden, address@hidden
> Betreff: Re: [uracoli-devel] description about how to add custom hardware to  
> theproject.

> Hi Axel,
> 
> i've tried this, to add new boards, but i can't get it to work.
> 
> 
> address@hidden:~/src/uracoli-test/uracoli-cvs$ scons 
> boards=../customboard/boards.cfg -h
> scons: Reading SConscript files ...
> Running with optimization --max-drift=1,--implicit-deps-unchanged,
> MD5-timestamp and selective rules
> 
> scons: *** Export of non-existent variable ''board''
> File "/home/tfh/src/uracoli-test/uracoli-cvs/SConstruct", line 459, in 
> <module> address@hidden:~/src/uracoli-test/uracoli-cvs$
> 
> 
> I'm doing this to support the different Incircuit boards which are on 
> my desk. They are all labeled v1.2 but use different combinations of 
> rf230a, rf230b, atMega1281, atmega128. This is very frustrating :(
> 
> Bjoern
> 
> -----Original Message-----
> From: 
> address@hidden
> [mailto:address@hidden
> .org]
> On Behalf Of Axel
> Sent: Freitag, 29. April 2011 22:36
> To: address@hidden
> Subject: [uracoli-devel] description about how to add custom hardware 
> to theproject.
> 
> Hallo all. 
> 
> I documented a bit, how to add a custom board to the source tree.
> 
> http://uracoli.nongnu.org/custom.html
> 
> Cheers Axel
> 
> 
>