[Bayonne-devel] Killing Bayonne before hangup hangs Bayonne.

[Erik Enge]

Bayonne version 1.2.5 under Linux.

I have a Dialogic card here running under Bayonne.  Everything works
fine, but I have the following problem.  I run Bayonne in trace mode:

  bayonne --globalcall --trace

and make phonecalls into it.  Everything looks good.  Then I Ctrl-C
Bayonne.  Normally this will shut Bayonne down cleanly and I can start
it up again and expect it to work.  However, if there was a phonecall
made to Bayonne which was not hungup when I killed it it hangs:

  trace: pid=1024 reason=2
  trace(0): 
/share/sys/bayonne/bayonne-1.2.6-1/lib/bayonne/1.2.6/bayonne.bin(stackTrace__Q23ost5Debugi+0x2f)
 [0x80774b3]
  trace(1): 
/share/sys/bayonne/bayonne-1.2.6-1/lib/bayonne/1.2.6/trace.dbg(debugFinal__Q23ost10TraceDebugi+0x1c)
 [0x4013d7c4]
  trace(2): 
/share/sys/bayonne/bayonne-1.2.6-1/lib/bayonne/1.2.6/bayonne.bin(__strtod_internal+0x28a1)
 [0x8058cc1]
  trace(3): /lib/i686/libpthread.so.0 [0x402d7f75]
  trace(4): /share/sys/bayonne/bayonne-1.2.6-1/lib/bayonne/1.2.6/bayonne.bin 
[0x42029098]
  trace(5): 
/share/sys/bayonne/bayonne-1.2.6-1/lib/bayonne/1.2.6/bayonne.bin(__libc_start_main+0x95)
 [0x42017499]
  trace(6): 
/share/sys/bayonne/bayonne-1.2.6-1/lib/bayonne/1.2.6/bayonne.bin(dlopen+0x41) 
[0x8057761]
  network: stopping
  scheduler: stopped
  
And there it hangs until I forcefully kill it with -9.  When I do that,
I have to restart the Dialogic drivers and Orbacus to get things working
again.  I have not been able to reproduce this problem consistently but
it has happened to me many times every day the last week.

Erik.