discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] wxPython 2.8.8.0 and cygwin installation failure


From: Nagaraj C Shivaramaiah
Subject: Re: [Discuss-gnuradio] wxPython 2.8.8.0 and cygwin installation failure
Date: Mon, 7 Jul 2008 11:13:17 +1000

Michael,

if you are still searching for wxPython 2.8.7.1, its here

https://sourceforge.net/project/showfiles.php?group_id=10718

Nagaraj

On Mon, Jul 7, 2008 at 10:43 AM, Michael S. Grant <address@hidden> wrote:
> Hello, Nagaraj,
>
> Thanks very much for this information - I had not thought of trying the
> earlier version of swig 1.3.31.  I have searched for wxPython 2.8.7.1 but
> have, so far, only found 2.8.8.0 (but I'll find the earlier version
> somewhere!)
>
> Best regards,
>
> Michael
>
>
>
>> Michael,
>>
>> Even I had a similar problem. When I reverted back to wxPython
>> 2.8.7.1, binutils 20060817-1  and swig 1.3.31 it was fine. So unless
>> you require 2.8.8.0 (or other combination) for some specific reason,
>> this is the easiest workaround.
>>
>> Nagaraj
>>
>> On Sun, Jul 6, 2008 at 12:06 PM, Michael S. Grant <address@hidden>
>> wrote:
>>> -- Hello,
>>>
>>> After searching the mailing list archive, I'm looking for help with
>>> wxPython 2.8.8.0 installation failures at step (9) of
>>> http://www.gnuradio.org/trac/wiki/wxPythonCygwin.  (I'm using python 2.5
>>> and swig 1.3.34).  The setup command is:
>>>
>>> python setup.py build_ext --inplace WXPORT=msw COMPILER=cygwin
>>> BUILD_GLCANVAS=0 BUILD_GIZMOS=0 UNICODE=0
>>>
>>> The error message was an undefined reference building '_controls_'
>>> extension:
>>> g++ -mcygwin -shared -s
>>> build/temp.cygwin-1.5.25-i686-2.5/src/msw/_controls_wrap.o
>>> build/temp.cygwin-1.5.25-i686-2.5/src/msw/_controls_.def
>>> -L/usr/local/lib
>>> ...
>>> undefined reference to `__imp___ZTV23wxDatePickerCtrlGeneric' ...
>>>
>>> followed by other similar errors and then:
>>>
>>> collect2: ld returned 1 exit status
>>> error: command 'g++' failed with exit status 1
>>>
>>> Had the same failure multiple times on 2 different machines, so help on
>>> this would be much appreciated!
>>>
>>> Michael
>>>
>>>
>>> _______________________________________________
>>> Discuss-gnuradio mailing list
>>> address@hidden
>>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>
>>
>
>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]